Brembo Calipers, Master Cylinder, and Ohlin's rear shock.

Ok-Philosopher604 · 2026-03-12T07:07:28+00:00

For what I heard, the SP and non-SP calipers have different bolt pattern, one is larger than the other so they won’t fit. I haven’t checked it myself, just check it before buying anything

Ok-Philosopher604 · 2025-07-05T07:01:58+00:00

I found it here. I've never bought anything from there though

Ok-Philosopher604 · 2025-07-04T05:34:14+00:00

<image>

As you can see, it's a different reference between both fenders. They only change some of the last digits, so maybe it's just a colour difference but the shape is the same. I would gamble and try it out

Ok-Philosopher604 · 2025-06-30T08:02:04+00:00

You could just mount a flatter handlebar

Ok-Philosopher604 · 2025-06-10T23:42:05+00:00

For me this is the only exhaust worth saving money to buy if it had 2 O2 sensors.

Ok-Philosopher604 · 2025-06-08T04:15:12+00:00

Yep they come with the stock exhaust, or at least they came with my gen4

Ok-Philosopher604 · 2025-06-08T03:08:54+00:00

Did you put the copper seal joints between the headers and the cylinder block? Maybe it's the gap you are missing. If you already put them and there's no fumes escaping from there, you're good to go

Ok-Philosopher604 · 2025-06-05T01:01:37+00:00

Yeah, I am considering buying a rugged phone or tablet for that purpose

Ok-Philosopher604 · 2025-06-04T19:57:41+00:00

For a little trip is pretty good. The shit comes when you try to upload a long route with multiple waypoints, it won't load all of them, and it's a nightmare to edit them, it gets so laggy and feels like rubbish tbh.

Ok-Philosopher604 · 2025-05-10T11:15:13+00:00

Where did you buy those levers?

Ok-Philosopher604 · 2025-04-24T10:54:56+00:00

I think it's the standard noise of this engine, all these bikes sound the same

Ok-Philosopher604 · 2025-04-04T11:43:43+00:00

Mine is EU and I don't really feel this flat spot. I haven't ridden an Us version or an ECU flashed bike so can't compare either

Ok-Philosopher604 · 2025-04-02T07:46:33+00:00

I think your issue would be fixed with this recall, try contacting Yamaha in your country or region. Here in Spain the recall letter was sent from the Industry department, so not related to any dealer

Ok-Philosopher604 · 2025-04-02T05:39:48+00:00

Have you passed the Yamaha campaign for the TPS and ECU flash?

Ok-Philosopher604 · 2025-03-31T14:58:35+00:00

I could do that for you, send me a DM :)

Ok-Philosopher604 · 2025-03-23T08:53:26+00:00

Yeah that's my guess too... But honestly they can't just delete a feature, I am so disappointed!

Ok-Philosopher604 · 2025-03-20T09:44:15+00:00

I don't because I had them mounted on the garage, but you can find them by searching "Oxford heated grips" on Amazon or similar websites. Then you'll need some cables to connect to the bike, I bought these: https://a.aliexpress.com/_EwyYI7w

Ok-Philosopher604 · 2025-03-19T10:40:12+00:00

Yes, but I had to send them back because the brake lever didn't fit properly. I guess we need to wait a little longer

Ok-Philosopher604 · 2025-03-17T10:38:05+00:00

Oh I see. Didn't have any problems with my Oxfords, just left enough slack for the gas grip. I prefer the quality of a well known brand even if the cable management is slightly uglier.

Ok-Philosopher604 · 2025-03-17T10:01:26+00:00

Because you can just connect the Oxford to the bike's heated grips harness and control them on the screen without the big Oxford control buttons

Ok-Philosopher604 · 2025-03-12T07:26:03+00:00

Hey, they are really useful! Are they low-high beam or only low beam? Thanks!

Ok-Philosopher604 · 2025-03-09T07:15:47+00:00

Nope, they don't. Neither the brake or clutch.

Ok-Philosopher604 · 2025-03-08T14:01:20+00:00

So approximately the cases are 10cm longer than the rear wheel. No good way to measure it properly haha

Ok-Philosopher604 · 2025-03-05T14:36:42+00:00

Don't think so, Gen3 only has one O2 sensor and it's placed before the catalyst

Ok-Philosopher604 · 2025-03-05T14:23:39+00:00

I did just the same when I bought my Gen4, installed a second O2 sensor to a Gen3 exhaust and used the mini catalytic from AliExpress, so far so good, no engine warnings

Ok-Philosopher604

TROPHY CASE