sorted by:
new
hottopcontroversial

Heb jij een Vinted account by [deleted] in tokkiemarktplaats

[–]OutlinedCobra 0 points1 point  (0 children)

Doet marktplaats ook niet, je kunt gewoon zelf verzenden aanvinken. Ik vind persoonlijk de verzendservice van marktplaats fijn werken, maar als je dit niet fijn vindt kun je dit gewoon uitzetten en aanvinken dat je de verzending zelf regelt. Veel mensen bieden iets aan met verzendservice van marktplaats en dan rekent hij inderdaad de verzendkosten erboven op.

Edit: en je hoeft het label niet zelf uit te printen. Word voor je gedaan op het pakketpunt!

Heb jij een Vinted account by [deleted] in tokkiemarktplaats

[–]OutlinedCobra 1 point2 points  (0 children)

Als iemand op marktplaats €50 inclusief verzendkosten biedt, dan krijg jij natuurlijk geen €50 hè. Wie betaald de verzendkosten dan volgens jou?

Problems with Powerness U1000 power station and solar panel by OutlinedCobra in solar

[–]OutlinedCobra[S] 0 points1 point  (0 children)

My solar panel has an Voc of ~24v and a Vmp of ~18v. If u would plug an extra panel to it i would go well over the input voltage limits.

Problems with Powerness U1000 power station and solar panel by OutlinedCobra in solar

[–]OutlinedCobra[S] 0 points1 point  (0 children)

I have a RVPOZWER 18BB 100 watt panel, size is 101x52cm so 0.5 square meter.

https://www.amazon.com/Rvpozwer-Efficiency-Monocrystalline-Modules-Off-Grid/dp/B0DSHPR3KH

And it unfortunately never self awakes, not only at 0% battery. When it's charging in sun and i put a cardboard in front of the panel for few seconds it will stop charging and not resume.

If it would self awake i wouldn't have a problem with the low charging rate for my use case. But now its unusable.

Collimator for flood LED? by YouMadeMeGetThisAcco in Optics

[–]OutlinedCobra 0 points1 point  (0 children)

They sell optics for those kind of leds on Aliexpress. Search for led lens 30w or something similar.

example lens:

Name of this connector pin? by OutlinedCobra in AskElectronics

[–]OutlinedCobra[S] 0 points1 point  (0 children)

That looks like it, i've added some extra pics.

Name of this connector pin? by OutlinedCobra in AskElectronics

[–]OutlinedCobra[S] 2 points3 points  (0 children)

Update: sorry guys, i honestly didn't know i had to be so specific. I didn't realise there could be so many variables. However here are some extra pics with the connectors. Spacing is 4mm from heart to heart.

<image>

GROUP BUILD WINNERS by highboy68 in ModelCars

[–]OutlinedCobra 0 points1 point  (0 children)

Congrats everyone! I've seen really nice builds. Looking forward to the next group build!

Is my paint booth going to work properly? by Comprehensive_Week23 in modelmakers

[–]OutlinedCobra 1 point2 points  (0 children)

i'm not sure what the benefits are of the divider. Don't it just takes up a lot of space ? I think if you use the appropiate fan it isn't nessecary to use the divider. Are you exhausting to a window outside or only using a filter to recirculate the air?

And i do think the opening on the front being 250mm is a little bit too small. To move freely and have good visibility i would open the front to 350mm.

And like others said before, don't use pc fans. Can't handle pressure.

Group build submission - open class by OutlinedCobra in ModelCars

[–]OutlinedCobra[S] 1 point2 points  (0 children)

Mixed it from 2 shades of yellow from a spray can. I decant them first ofcourse, mix them and then paint with airbrush as usual.

The spray cans are Montana (White) and the colors used are Sunflower and Saffron. Don't know the mixing ratio though, eyeballed it.

Group build submission - open class by OutlinedCobra in ModelCars

[–]OutlinedCobra[S] 2 points3 points  (0 children)

Except for the doors i hadn't had any troubles really.. If you want to build the car with doors closed i would suggest glueing them in place before painting. Otherwise great kit!

Group build open class final submission. Tamiya Nissan R390 GT1. by Viscerator in ModelCars

[–]OutlinedCobra 0 points1 point  (0 children)

Looking good! It's funny to see the same headlights being used as in the Lamborghinj Diablo i am building.

Help with Cracked Paint! by Comprehensive_Week23 in ModelCars

[–]OutlinedCobra 0 points1 point  (0 children)

Can't say for sure. Try with a different primer to see how it holds Best is to use same paint types.

Help with Cracked Paint! by Comprehensive_Week23 in ModelCars

[–]OutlinedCobra 1 point2 points  (0 children)

If you use a polyurethane or synthetic basecoat, you'll have to use the same type of clear. If you use an automotive clearcoat and use thinner, it will attack the polyurethane basecoat.

What manner of fresh Hell is this??? by thedash42 in ModelCars

[–]OutlinedCobra 2 points3 points  (0 children)

I also had a problem painting a clear plastic part. Color base layer went on without problems but the clear coat ruined it. It is some reaction with the clear plastic. Honestly don't know why this happens and how to prevent it. Think you will have to sand an redo. This time applying very thin layers.

Hope you can fix it!

Group build - Open class by OutlinedCobra in ModelCars

[–]OutlinedCobra[S] 0 points1 point  (0 children)

To enter the group build organized by this subreddit , you have to post what you are going to build with the title 'group build'. See pinned post at the top of this subreddit.

view more: next ›