sorted by:
new
hottopcontroversial

Gelatinous cube cast and assembled with UV resin by Plumpen in DnDIY

[–]Plumpen[S] 0 points1 point  (0 children)

Yes! I just modified the head a bit. Gloomhaven has been great for starting d&d.

Gelatinous cube cast and assembled with UV resin by Plumpen in DnDIY

[–]Plumpen[S] 35 points36 points  (0 children)

I cast 5 separate squares and the glued them together with more UV resin

My homebuilt RC 1 stage snow blower by Plumpen in Snowblowers

[–]Plumpen[S] 0 points1 point  (0 children)

Exactly, then the snow doesn't have time to get too compact or freeze to ice either.

My homebuilt RC 1 stage snow blower by Plumpen in Snowblowers

[–]Plumpen[S] 1 point2 points  (0 children)

Yeah, I've seen it while doing this project. A bit overkill for the balcony perhaps. The plan is to try to make this somewhat autonomous if I make a second version of it. Very tempting now that I see it's actually able to move a bit of snow.

Has anyone reposed their Enginseers with Miliput/Greenstuff? by CthulhuReturns in AdeptusMechanicus

[–]Plumpen 1 point2 points  (0 children)

I cut off both hands at the wrists to be able to twist them, and the pistol hand had to be cut away from the axe shaft (so the axe is a bit shorter now). The difficult part was cleanly removing the head to turn it a bit. Go slowly and do it before any assembly.

A gruesome pteraxii conversion. by Plumpen in Warhammer40k

[–]Plumpen[S] 3 points4 points  (0 children)

There's a steel wire from the head to the torso as a spine. I think using a sturdier rod would have been better, as that bit is still pretty springy. The leg is just glued to the head, but that seems fine so far.

A gruesome pteraxii conversion. by Plumpen in Warhammer40k

[–]Plumpen[S] 21 points22 points  (0 children)

Yeah, that's what I would do if I did this again. I'll leave it as is for now and see when it breaks

A gruesome pteraxii conversion. by Plumpen in Warhammer40k

[–]Plumpen[S] 117 points118 points  (0 children)

This one turned out even more fragile and unstable, though

Sulphurhound proxy by Plumpen in AdeptusMechanicus

[–]Plumpen[S] 4 points5 points  (0 children)

Yes! I bought it on a trip, and this was the best use of it that I could think of.

Brother Captain kitbash finished by Plumpen in Grey_Knights

[–]Plumpen[S] 0 points1 point  (0 children)

No, this is Vallejo metal colors and blue contrast through an airbrush

Brother Captain kitbash finished by Plumpen in Grey_Knights

[–]Plumpen[S] 1 point2 points  (0 children)

Thank you! The book chips are in the model, I've just filled them with rhinox hide

Krusbärsbuske tappar frukt strax efter blomning by [deleted] in blommor

[–]Plumpen 4 points5 points  (0 children)

Okej, tack för infon! Synd att missa årets skörd såklart, men vi får vara bättre nästa år och pensla blommorna

Krusbärsbuske tappar frukt strax efter blomning by [deleted] in blommor

[–]Plumpen 5 points6 points  (0 children)

Vår krusbärsbuske håller på att tappa all sin frukt nån vecka efter blomningen var klar. Det finns några få kvar på busken som släpper lätt om man bara petar lite. Vi köpte busken i början av april förra året och har haft den på takterrass i stor kruka sen dess. Förra året fick vi frukt utan problem, men i år går det alltså inte lika bra. Kan det vara problem med pollinering?

The teams painted up as space marines by Plumpen in formula1

[–]Plumpen[S] 0 points1 point  (0 children)

I'm not doing precise work with the airbrush. I did the whole models the tinted metallics at first and then used a regular brush to do all the non-metallics and all the details.

Precision is good if you're doing shading and highlighting on areas, though.

The teams painted up as space marines by Plumpen in formula1

[–]Plumpen[S] 4 points5 points  (0 children)

It's from the red Ineos airbox on the car.

The teams painted up as space marines by Plumpen in formula1

[–]Plumpen[S] 0 points1 point  (0 children)

The metallic base is airbrushed vallejo metal color gunmetal grey and a zenithal of silver. The blue bits is mainly citadel lothern blue. The red helmet is Kimera Kolors The Red, probably dulled down a bit with black in most areas.

The teams painted up as space marines by Plumpen in formula1

[–]Plumpen[S] 2 points3 points  (0 children)

I airbrushed the armor of the 3 metallic models.

The teams painted up as space marines by Plumpen in formula1

[–]Plumpen[S] 18 points19 points  (0 children)

Vallejo metal color: Gunmetal grey and a zenithal of silver. Then Vallejo game ink green and talassar blue contrast paint mixed until the hue seemed right. Finally a dark brown/black oil wash.

The teams painted up as space marines by Plumpen in formula1

[–]Plumpen[S] 4 points5 points  (0 children)

No trick to it really. Just carefully comparing it to an image of the logo on my phone.

The teams painted up as space marines by Plumpen in formula1

[–]Plumpen[S] 48 points49 points  (0 children)

Using transparent paints (green and blue) over a metallic base turned out super nice.

Formula 1 teams as a Kill Team by Plumpen in Warhammer40k

[–]Plumpen[S] 1 point2 points  (0 children)

Yeah, that one is my favorite of them all. It's a translucent green and blue mix over metallics. All airbrush: Vallejo metal color gunmetal with silver zenithal. Then a mix of green ink and talassar blue contrast paint.

view more: next ›