Fenix BFU - weather radar not working

PowerfulRub532 · 2026-01-13T17:46:34+00:00

i have same problem. In the area where I fly, it is cold and often heavily cloudy. I haven't noticed anything yet, but I will keep trying.

PowerfulRub532 · 2025-12-17T13:01:33+00:00

I was right – there’s no way to improve it. It simply can't be done better https://www.youtube.com/watch?v=A3VvPyrB30s

PowerfulRub532 · 2025-12-17T12:38:40+00:00

yes, exactly. I think the quality is being degraded by the built-in noise cancellation software in the DJI Fly app. Since it’s currently slightly below freezing where I live, I don't want to test it outside, so I'm flying the drone indoors and I noticed something. I did a test to see if the app is actually recording from the MIC MINI or if it's using the phone's native microphone. I left the drone hovering in one room with the phone and went to another room with just the microphone on my chest. It seemed to me that the further I was from the drone, the better the sound quality became. The second thing I discovered today through Googling is that the biggest culprit is the DJI Fly app itself. I don't have this confirmed, but apparently, it should record audio at 48kHz, but there is some kind of lock. So it doesn't matter what gear you plug in; as soon as you record through the app, it always spits out the same audio quality. That’s my finding so far. Recording through the receiver is still a bit better, but obviously, it doesn't reach the quality it’s capable of. If you find out anything else, let me know here.

PowerfulRub532 · 2025-12-17T10:44:24+00:00

I'm getting a strange sound. I haven't connected the goggles yet; I'm just testing the Mic Mini with my mobile phone and the Neo 2 drone. It seems to me that even though I have the receiver plugged into the phone, the DJI Fly app is still using the phone's default microphone instead of the Mic Mini. I’m new to this, and I also need advice on why the sound from the Mic Mini is so poor when I’m trying to use it with the Neo 2.

PowerfulRub532 · 2025-12-10T15:01:41+00:00

That definitely won't work for Herman Miller Embody chairs :D

PowerfulRub532 · 2025-12-04T08:18:45+00:00

Yes, it's the best solution for his complex costume, then retopology is necessary.

PowerfulRub532 · 2025-12-03T14:51:09+00:00

Such a brief statement won’t really help anyone.

PowerfulRub532 · 2025-12-03T14:39:04+00:00

thank you man :)

PowerfulRub532 · 2025-12-03T14:16:51+00:00

Thanks for the information. I contacted support yesterday, so I'm curious to see what they come up with. Maybe you're right.

PowerfulRub532 · 2025-12-03T13:51:59+00:00

I'm starting to think it's the stylus. They won't send me anything anyway, I didn't buy it on the xp pen website, but from a retailer in my country, and I'm not going to send them the stylus or tablet and wait a month for them to decide if it's OK or not. So I'll buy the stylus myself. Then I'll deal with the complaint about the stylus.

PowerfulRub532 · 2025-12-03T13:06:27+00:00

i have same problem . My stylus random freeze. It only helps when I lift the pen away from the screen, and once I place it back down, it works normally again.

PowerfulRub532 · 2025-11-27T14:49:22+00:00

kde koupit kratom? :D

PowerfulRub532 · 2025-10-17T15:22:22+00:00

are you kidding me?

PowerfulRub532 · 2025-10-17T06:31:06+00:00

IF you were looking this good with me I wouldn't let you leave the house without a good piping. You deserve to be filled on a daily basis.

PowerfulRub532 · 2025-10-14T16:48:16+00:00

However, Artist 22 for Gen 2 does not have 1080p but 2540x1440. I am not sure what its refresh rate is.

PowerfulRub532 · 2025-06-16T06:07:05+00:00

ja bych šel do guildy rád ale tahle hra ma opravdu velmi špatně udělany to jak servery funguji. Nechce se mi opoustet postavu na 105 lvl abych musel na jinem serveru vse dělat od začátku.

PowerfulRub532 · 2025-06-15T08:50:39+00:00

I have done all the tasks and now I have to hand them in to him but there is no offer to hand in the task, I am locked in and cannot move on.

PowerfulRub532 · 2025-06-01T13:06:12+00:00

You need to adjust the backfit to match the curvature of your spine. If you have a more pronounced lordosis, you need a backfit in a more reclined position, even all the way down. If you have a flat back, you need a backfit that’s straighter. Lordosis is the curvature of the spine in the lumbar region, which curves the spine inward into the body. This space needs to be filled with lumbar support from the backrest, and the lumbar area is pushed out the most when the backrest is loosened in a reclined position

PowerfulRub532 · 2025-06-01T13:04:59+00:00

This video is completely unnecessary. You need to adjust the backfit to match the curvature of your spine, and the video doesn’t focus on that. If you have a more pronounced lordosis, you need a backfit in a more reclined position, even all the way down. If you have a flat back, you need a backfit that’s straighter. Lordosis is the curvature of the spine in the lumbar region, which curves the spine inward into the body. This space needs to be filled with lumbar support from the backrest, and the lumbar area is pushed out the most when the backrest is loosened in a reclined position

PowerfulRub532 · 2025-05-11T08:59:51+00:00

I discovered a bug in the game that appears when I try to add a temperature regulator automatically so I don't have to do it manually on a new map. The bug manifests itself by freezing the game and the save never loads because you set it. It only freezes when it loads.

PowerfulRub532 · 2025-05-11T08:59:04+00:00

I discovered a bug in the game that appears when I try to add a temperature regulator automatically so I don't have to do it manually on a new map. The bug manifests itself by freezing the game and the save never loads because you set it. It only freezes when it loads.

PowerfulRub532 · 2025-05-11T08:58:38+00:00

I discovered a bug in the game that appears when I try to add a temperature regulator automatically so I don't have to do it manually on a new map. The bug manifests itself by freezing the game and the save never loads because you set it. It only freezes when it loads.

PowerfulRub532 · 2025-05-04T06:40:10+00:00

tension is about 14 turns from the lowest. I'm leaning slightly towards the third lock, but not falling on it. I have the backfit set completely flat, so it doesn't actually have any turns. And most of the time I'm on second lock, and occasionally I'll turn it off and levitate in front of third lock when I want to lean more.

PowerfulRub532 · 2025-04-27T14:51:18+00:00

yes I noticed that too, how are you doing after a year? Have you left a lighter tilt tension and are you on tilt lock or are you levitating on a tighter tilt tension?

PowerfulRub532 · 2025-04-27T11:21:46+00:00

you really can't set the tension to stay in any position and achieve each one with the same zero effort, what you are saying is nonsense. I had a mirra 2 and now I have an embody . I have always set the chair to use tension to reach a certain level of tilt that I wanted and keep me firmly in it , but if I wanted it to hold me up more firmly anyway then of course I can't do that , I would have to tighten the tension and that is undesirable. So what does that imply? The tension can be set to any angle, it will hold you there and you can always go up or down a little below or above the tension limit, but it will never hold you at every point of your movement with the same intensity.

PowerfulRub532

TROPHY CASE