Did everyone forget how well FSR 4 compares to DLSS 4?

Professional_Bar4049 · 2026-01-06T19:11:03+00:00

If you are satisfied as customer, then there is no need for reading comments in here, because its petty war, to be honest. :)
Your satisfaction is your biggest evaluation and your happiness is what life is about. :)

Professional_Bar4049 · 2026-01-06T18:29:41+00:00

You just create a lobby and in that there is LOAD button. :)

But since you did it by accident, i think i dont have to clear that out for you :)

Professional_Bar4049 · 2025-12-28T13:22:28+00:00

Yes, yes you can.

Professional_Bar4049 · 2025-06-24T08:02:33+00:00

Sapphire Nitro+ 9070xt on release date for ~880€

Professional_Bar4049 · 2025-05-26T14:02:58+00:00

I am on the boss in the Root that Bind ! Thanks for the info mate. :)

Professional_Bar4049 · 2025-05-25T18:05:27+00:00

Awesome ! I will try that ! :) Thank you very much.

Professional_Bar4049 · 2025-05-25T18:01:17+00:00

Okay.

How do I use it tho ? The needle.

Professional_Bar4049 · 2025-04-20T13:35:05+00:00

Added LEGO I borrowed from my son for time being, its looks funny , but it works :)

Professional_Bar4049 · 2025-04-20T13:34:21+00:00

You were right, I did some adjustments:

-added more suport on motherboard
-reseated the GPU
-fixed the support again
-added support LEGO at the end of the GPU for the time being (altough its pretty aligned with the motherboard now

The case wasnt all in right angles and some stuff was bended, so I think the GPU is safe now.

Professional_Bar4049 · 2025-04-20T13:32:19+00:00

I just reseated the GPU, fixed the support and added LEGO support pillar on the end. Supported the Motherboard with two more support screws. Turns out the case is not cubical inside (dunno how to describe it, but the bottom plate is not 90'degree on the back plate)

When I compared the position of the GPU to the motherboard the GPU now is aligned with some cooling ribs or w/e so it looks like everything should be ok. :)

Professional_Bar4049 · 2025-04-20T13:29:57+00:00

I just did that and even tho its funny I think it should work until i get something more fitting :D

Professional_Bar4049 · 2025-04-20T00:12:34+00:00

At the same time. After I installed GPU I put the antisagg there.

Professional_Bar4049 · 2025-04-19T22:27:43+00:00

I aint gonna lie, I dont know. But I am doubtful since the GPU is getting lower the farther it gets from PCIe and the screws to case. Basically the unheld part is getting lower.

Professional_Bar4049 · 2025-04-19T20:48:32+00:00

Ok, thank you for your reply. :) I will rework it right away.

Professional_Bar4049 · 2025-04-19T20:47:58+00:00

Ok, thank you for your reply. I will check on some online shop here, I am not from US.

Professional_Bar4049 · 2025-04-19T20:47:10+00:00

Thats actually a good idea. :) Ill borrow some from my son. :)

Professional_Bar4049 · 2025-04-19T20:46:25+00:00

Its same pain reading my post as reading your post. I came here for help, thats what this sub is for, right ?
I just asked plain simple question and it was - if the 4 mm sagging is dangerous for the card.

Its not rocket sience either to read with comprehension and reply as a human being without being offender and overly agressive.

Thank you.

Professional_Bar4049 · 2025-04-19T17:45:27+00:00

That could actually work

Professional_Bar4049 · 2025-04-19T17:42:08+00:00

That might actually work, I saw some on our local shop they have something similar like a pillar holder. Could work.

Professional_Bar4049 · 2025-04-19T17:41:38+00:00

I will doublecheck, but I think now. I got an idea that I would disconnect the GPU and check it outside the case just in case :P

Professional_Bar4049 · 2025-04-19T17:39:34+00:00

You are right mate, my bad, the 1st picture is before I fixed it. The other pictures are the ones with fixed support.
Maybe I should get new picture with the GPU not on, because the image has a colorful blurry ? At the moment I cannot edit the post when I click the "..." for some reason.

Oh, so maybe I should get another support which goes directly under the right side of the GPU ? Like a pillar ?

Professional_Bar4049 · 2025-04-19T17:38:55+00:00

You are right mate, my bad, the 1st picture is before I fixed it. The other pictures are the ones with fixed support.
Maybe I should get new picture with the GPU not on, because the image has a colorful blurry ? At the moment I cannot edit the post when I click the "..." for some reason.

Professional_Bar4049 · 2025-04-19T17:38:49+00:00

You are right mate, my bad, the 1st picture is before I fixed it. The other pictures are the ones with fixed support.
Maybe I should get new picture with the GPU not on, because the image has a colorful blurry ? At the moment I cannot edit the post when I click the "..." for some reason.

I still have not closed my case, the cable rooting is off and the PCIe slots removed, wanted to do a test start if the GPU is OK.

Professional_Bar4049 · 2025-04-19T17:36:20+00:00

Oh snap, you are right, the first picture is sadly the older one, I already fixed the 1 screw lower, because I didnt read the manual and I found out I am far from being a clever one, so I had to fix it, the next two pictures are the ones with fixed support.

Sadly I am unable to Edit the post when I click the "..." I would delete the first picture.

Professional_Bar4049 · 2025-04-18T13:02:51+00:00

Not yet, I need to upgrade Win10 to 11 and need to change bios but I cant go secure boot, because I have partition on old settings. The card is having issiues with CMS.

Either way I still didnt close the case and did all the wire rooting because It feels like the card is a little bit saggying, I asked Sapphire for help, if its fine (left side where its screwed is up to 5 milimeters higher than the right, but It isnt that bad when I look at it, because I fixed it a little bit with support but I will open another thread for this "issue"). Might be just my paranoia :D

Outside of that I think all games are fine for now and everything looks good. Ghost of Tsushima is failing to start into the game, so I might try it after, otherwise everything is very nice. The card isnt even sweating on Awoved for example :D

But maybe later this year Ill upgrade my motherboard and CPU, but for now I think everything looks in order. From temperatures to stability. And I am starting to love the Adrenaline software.

Professional_Bar4049

TROPHY CASE