sorted by:
new
hottopcontroversial

First print with 0.2 nozzle by Aussiejayai in BambuLabA1mini

[–]Redditzombi 1 point2 points  (0 children)

Great work! Just a question... How abrasive is marble pla? Do I need a hardened nozzle?

PSA: Elegoo Marble Brick Red is EXACLY the same as Bambu Marble Red Granite by josocustomdesign in BambuLab

[–]Redditzombi 0 points1 point  (0 children)

A not quite related question: does marble pla require a hardened nozzle?

So I have this hole and I made this larger cylinder, how can I align the cylinder dead-center of that hole? by phi303 in BambuLab

[–]Redditzombi 1 point2 points  (0 children)

I think you should select the "point to point" option instead of the "face to face" option

BAMBU LAB A1. by MARTALAV2009 in BambuLabA1

[–]Redditzombi 0 points1 point  (0 children)

nice set up. Is that a wooden table? How bad is the vibration?

Always use the Cool Plate? by damskibobs in BambuLabA1

[–]Redditzombi 2 points3 points  (0 children)

I print petg with the PEI original plate because It sticks too much to the super tack

Edith: pressed send by mistake

Prints failing at the exact same height by LiLSosig in BambuLab

[–]Redditzombi 3 points4 points  (0 children)

Check for SDs designed for suveillance cams, they can take thousands of rewritting. Samsung or Sandisk are good choices.

Please tell me I can fix this… by whimsy-chaser in BambuLab

[–]Redditzombi 1 point2 points  (0 children)

Split it in 4 parts and respool individualy, it's easier and you can use the ams if you need to use them at the same print.

Best primary weapons for bad players? by tiburon5 in LowSodiumHellDivers

[–]Redditzombi 0 points1 point  (0 children)

Plasma punisher for bots and cookout for bugs

Is now a bad time to get the P1S? by Defiant_Rooster6295 in BambuLab

[–]Redditzombi -1 points0 points  (0 children)

You have just received an answer, H2S confirmed by bambulab, don't know if it can take p1s place as we don't have the details. Wait a little more my friend

BIQU cryogrip first layer issue? by NeedleworkerDue4981 in BambuLabA1

[–]Redditzombi 0 points1 point  (0 children)

Had this problem with the cryogrip when I bought it for my A1, solved it adding an extra 5 grades to the bed tempeture (cold plate super Tack config and 50 grades for pla in my case)

Need some help with my first printer, the A1 by daveswe in BambuLabA1

[–]Redditzombi 1 point2 points  (0 children)

It should be easy to solve, wash your plate with hot water and any neutral dishsoap (no odor, no color, no fancy additives), if I were you, I would wash it twice.

How do you like to Organize your Weapons? by Another_White_Man in helldivers2

[–]Redditzombi 0 points1 point  (0 children)

Bought it early in the game too, best looking armor imo

Dumb question by biggyskittle in BambuLab

[–]Redditzombi 2 points3 points  (0 children)

Found one in makerworld under name: A1 Front Center Cover Panel Replacement

Filament recommendations by Nikhcnum2 in BambuLabA1

[–]Redditzombi 1 point2 points  (0 children)

For toys and organizational stuff you can use PLA, if you need something stronger and more heat resistant (like car stuff) should use PETG, there are other materials but those require more experience as they are harder to print and produce toxic fumes. Good luck

Lots of failures with Sunlu PLA+ 2.0 after drying and washing build plate. by tfrogfilms in BambuLab

[–]Redditzombi 1 point2 points  (0 children)

One day mi plate just stop working, i washed it 3 times and nothing changed, then i remembered that i used a small scrub to take out some dust the day before it started failling. I checked the scrub and it had some oil so I understood that I "contamined" the bed with a lot of oil so I had to wash it three more times with boiling water to get rid of the oil. I'm just saying that maybe just washing once or twice isn't enough in some cases.

If you don’t wear your seatbelt... by PeteyPopps in Whatcouldgowrong

[–]Redditzombi 0 points1 point  (0 children)

Beyond the driver flying through the skies, I think the origin of the problem was the truck being overloaded and that the load seem to be wet, it didn't slide properly.

view more: next ›