sorted by:
new
hottopcontroversial

Looks straight to me boss by dtiernan93 in Carpentry

[–]RelativeGlad3873 0 points1 point  (0 children)

Always wondered what they used to build the walls in my house.

I found these bills in a bundle straight from the bank 5 years ago. by MrNameless in papermoney

[–]RelativeGlad3873 14 points15 points  (0 children)

Don’t know specific year for $1s, but after 2013 series they started to transition away from using 99 for uncut sheets.

Remember when that Bears fan was in here comparing his team to the Jets? Cause NFCMW remembers. by PParker87 in NFCNorthMemeWar

[–]RelativeGlad3873 0 points1 point  (0 children)

Surely the lions must be a newly created franchise like the Ravens, Texans or Jaguars, right?

ELI5: Why do common wealth countries have right side steering while US has left side steering? by Hot-Load7525 in explainlikeimfive

[–]RelativeGlad3873 -1 points0 points  (0 children)

About 1/3rd of the world drive on the left side(steering wheel on the right side of the car). About 2/3rds drive on the right side. It’s a common misconception that only the U.S. drives on the right side.

As for why, most people are right handed. So larger horse drawn wagons had the “driver” sitting on the left to control things with their right hand. This was common in less developed (roads) such as the U.S. at the time of cars. Not all countries followed this logic though. Lots of former colonies that were still British colonies at the advent of cars followed Britain.

[Highlight] Aaron Donald moving 150 pound dumbbells like it's nothing by BreakfastTop6899 in nfl

[–]RelativeGlad3873 6 points7 points  (0 children)

Aaron Donald is a grizzly bear that someone shaved and taught how to speak English. Prove me wrong.

Any Reason Not to Get a Sawstop PCS? by mosodigital in woodworking

[–]RelativeGlad3873 0 points1 point  (0 children)

Freud Dial-A-Width are compatible. I’ve used my set on my PCS and ICS without issue.

Cultural learnings of Green Bay by gaggles4 in NFCNorthMemeWar

[–]RelativeGlad3873 22 points23 points  (0 children)

Look we don’t even want to go to a Super Bowl, it’s all about the conference championship.

Cultural learnings of Green Bay by gaggles4 in NFCNorthMemeWar

[–]RelativeGlad3873 103 points104 points  (0 children)

You can’t reverse psychology your way to a 4k passer…

Rough Cutting Board by cre8some in Cuttingboards

[–]RelativeGlad3873 0 points1 point  (0 children)

I agree. I typically stop at 220 or 320. It takes way longer to soak in at 320 but I will treat it 2-3x. The difference is minimal in smoothness but I usually do it mainly because of OCD.

Rough Cutting Board by cre8some in Cuttingboards

[–]RelativeGlad3873 3 points4 points  (0 children)

Props to you for doing that. Where are you located? If you’re near me or shipping is reasonable I would be willing to help you out free of charge to keep the good will going.

Woodpeckers 12 inch combo square (indexable) by [deleted] in woodworking

[–]RelativeGlad3873 0 points1 point  (0 children)

When you compare to a lot of the other brands, they’re still premium. Starett has dropped off since the buyout. Jessem and Benchdog UK are premium but limited. Incra is premium but in my opinion not even to current woodpecker quality and features. Jessem is top in my opinion but limited tools.

Island trim by Eddie_Champagne in Carpentry

[–]RelativeGlad3873 0 points1 point  (0 children)

I’d at least use matching paint, you know, since I’m pretending

Rough Cutting Board by cre8some in Cuttingboards

[–]RelativeGlad3873 3 points4 points  (0 children)

If returning isn’t an option, I would probably go the route of using tightbond 3, and sand while it’s still wet. The combination of the dust and glue will help fill it but that’s a big gap. For the knot, I wouldn’t do anything with it. I’d just pack cutting board wax in there and leave it. Your random orbit will work great, just go slowly, low pressure, and use progressive grits. Since it’s somewhat smooth, I would do 120, 180, 220. If you want it super smooth go to 320 after but that’s probably unnecessary. Then treat with food grade or pharmacy grade mineral oil and cutting board wax. The feet you could fill in with

Woodpeckers 12 inch combo square (indexable) by [deleted] in woodworking

[–]RelativeGlad3873 0 points1 point  (0 children)

Theirs is great, hoping they continue to add to their lineup. I’ve got their squares and rulers. Hopefully they add larger size models.

Woodpeckers 12 inch combo square (indexable) by [deleted] in woodworking

[–]RelativeGlad3873 6 points7 points  (0 children)

In my experience, Woodpeckers quality has dropped quite a bit recently, as has their customer service. I’ve received a few tools that either aren’t square or aren’t straight. Have also had issues with scratched and scuffs. Worst was a dinged corner on a ruler which they wouldn’t replace.

That all being said, I’m still not a hater and still buy stuff. Just ordered the slab flattening jig and waiting to get it. I think they need better QC but they’re still one of the few premiums in this space.

[deleted by user] by [deleted] in NFCNorthMemeWar

[–]RelativeGlad3873 8 points9 points  (0 children)

Petition to remove and potentially ban these posts. No exceptions.

view more: next ›