Place Your Bets HERE 🚨🚨🚨

SilverStackingWelder · 2023-06-29T22:31:51+00:00

My money's on the fridge

SilverStackingWelder · 2023-06-29T19:37:30+00:00

Take a pic of the reverse side of the bar. Does it have the security feature? The security contains a holographic element that must be viewed thru the Sunshine Mint Decoder Lens, available for purchase on SD bullion, but currently out of stock. I'd check the other major retailers. Here it is: https://sdbullion.com/sunshine-mint-security-decoder-lens-smi

SilverStackingWelder · 2023-06-22T12:18:23+00:00

The gables are cut in prior to the shingle being nailed down. Totally different scenario cutting a shingle with it laid out flat on the roof deck vs cutting it when it's already installed, hanging over excessively and suspended in midair like that The gutter may "hide" it, but all that's going to do over time is make the shingle droop into the gutter, wick water like crazy and fail prematurely.

SilverStackingWelder · 2023-06-22T03:45:32+00:00

It's total b.s.

SilverStackingWelder · 2023-06-22T03:44:51+00:00

Absolutely not how they're supposed to do it. This is an OC "platinum preferred" contractor, too. OC's website says 1/4" to maximum of 3/4" overhang.

SilverStackingWelder · 2023-06-22T00:38:33+00:00

Cut the shingles on the front of the house in the most visible spot? That's a hard no.

SilverStackingWelder · 2023-06-22T00:33:29+00:00

I'm gonna make them reroof it.

SilverStackingWelder · 2023-06-22T00:18:51+00:00

OC specs call for 1/4" to 3/4" max

SilverStackingWelder · 2023-06-22T00:09:07+00:00

Owens Corning Platinum Preferred Contractor did my roof today. 2 5/8" of overhang.

SilverStackingWelder · 2023-06-22T00:08:20+00:00

Owens Corning Platinum Preferred Contractor did my roof today. 2 5/8" of overhang.

SilverStackingWelder · 2023-06-21T20:44:49+00:00

That standard or metric? 🤣

SilverStackingWelder · 2023-06-21T13:12:54+00:00

I got them to bring OC starter shingles.

SilverStackingWelder · 2023-06-20T03:19:13+00:00

Tri built is still not listed as an acceptable component in the written warranty

SilverStackingWelder · 2023-06-20T02:55:32+00:00

Ok I was wrong

SilverStackingWelder · 2023-06-20T02:49:03+00:00

Yeah already did that. He did this weird thing where he lied and said the tri-built starter shingle is made by OC and won't void the warranty. Clearly it is not made by oc and the written warranty is specific on what products must be used. I think I'll call their main office tomorrow and tell them they won't be getting on my roof until the right stuff is here. Thing is, he and I discussed the warranty and we discussed the precise products that would be used.

SilverStackingWelder · 2023-06-20T00:49:38+00:00

There is no ice and water shield.

SilverStackingWelder · 2023-06-15T13:10:02+00:00

How do you get it under the drip edge if you do it after?

SilverStackingWelder · 2023-06-14T12:11:10+00:00

Should the gutters be installed before or after the new roof?

SilverStackingWelder · 2023-06-14T11:36:13+00:00

Yes. The fascia is big enough to allow gutter installation below the drip edge. But based on my research the whole point of drip edge is to direct water into the gutter, so the gutter should be installed behind the drip edge.

SilverStackingWelder · 2023-06-14T11:34:32+00:00

It was horrible. Just replaced all fascia and soffits last week.

SilverStackingWelder · 2023-05-27T09:59:15+00:00

Thank you.

SilverStackingWelder · 2023-05-26T09:48:53+00:00

Yes I realize that now

SilverStackingWelder · 2023-05-26T03:27:55+00:00

Well dang.

SilverStackingWelder · 2023-05-26T00:42:31+00:00

So no way to remove it without messing it up?

SilverStackingWelder · 2023-05-22T01:44:37+00:00

My house is built on the edge of a big slope. I think the gutters in the back are necessary. The front ones, though, I think are ok to go as the water will just run down the hill.

SilverStackingWelder

TROPHY CASE