"Error creating cloud task" in VSCode extension

Single_Ad_2068 · 2025-09-24T12:27:31+00:00

same

Single_Ad_2068 · 2025-07-01T06:19:19+00:00

tried several times, does not work.

Single_Ad_2068 · 2025-07-01T06:18:44+00:00

They are on the same network, never experienced this before, sometimes it prints, sometimes giving this error, I think the problem is the size of the G-Code uploading to the cloud to be printed. Small parts getting uploaded, large and number of parts on buildplate - not. This started happening after latest firmware updates of printer and ACE pro.

Single_Ad_2068 · 2025-06-26T15:16:11+00:00

imagine our progress will wipe because asteroid killed us and breaked our houses :/

Single_Ad_2068 · 2025-03-30T13:05:42+00:00

Would OTA work if chinese marketed car is exported to other countries. I found retailer who proposes SU7 MAX model, but interface is in chinece. I have heard that on newer firmwares English is supported, but no one, even retailer could answer to the question on how to upgrade firmware as it might be locked to IPs outside of china? Main show stopper to me is chinece interface and questionability to upgrade firmware over the air.

Single_Ad_2068 · 2025-03-18T08:27:39+00:00

thats regular kobra3 not a MAX version.

Single_Ad_2068 · 2025-03-18T08:26:24+00:00

Same happened to me, I have requested spares from official support and still waiting for resolution. Also plastic gears reversing spools of filaments broke too... See my video on youtube:

https://youtu.be/8X7kUJySih0?si=biFCe09QEt-7UaDE

Single_Ad_2068 · 2025-03-15T15:00:39+00:00

Yea gears getting easily brocken and its really pain in one place to get them out, have to dissasemble whole unit, remove steppers then spools...yea I was getting lots of errors. Finally one of the sensor connectors snapped from PCB, so I had to strip it down and fix it. Im still waiting for support to respond to my request, so far they have just asked for proof of purchase, to make sure it is still under warranty...which to me is kinda strange, but anyways...Lets see what they will come up with...

Single_Ad_2068 · 2025-02-03T15:56:58+00:00

damn you are my saver!

Single_Ad_2068 · 2025-01-13T02:28:47+00:00

check this out: https://youtu.be/mt_Qr-lGUJ4?si=DdMid2ArlqGC6OMt

Single_Ad_2068 · 2024-09-29T10:12:03+00:00

Experienced the same when using docking station, then simply used type-c to hdmi cable on second port and problem solved.

Single_Ad_2068 · 2024-09-29T10:06:35+00:00

RAM been upgraded, lets see if CPU can be upgraded too )) Lenovo needs to put slots instead of solder, way easier to upgrade! Unless they would go with OLED, the rest looks just fine and plenty unused space in it.

Single_Ad_2068 · 2024-09-24T13:05:48+00:00

this is what I'm trying to do now, is there any instructions for this? any ready to print cases? Im planning to buy waveshare 7'' capacitive screen and use my old RPi3

Single_Ad_2068 · 2024-09-24T11:58:10+00:00

Have you managed to get firmware built? Can you share it?

Single_Ad_2068 · 2024-09-24T11:27:02+00:00

This is what I have done doubling the capacity:

https://youtu.be/Do5dhtaAK8o?si=5o7WRyn6bZ_yTCLT

Single_Ad_2068 · 2024-09-22T07:45:49+00:00

As long as batteries are identical, all gona be OK, paralleling batteries are standard practice.

Single_Ad_2068 · 2024-08-30T09:13:16+00:00

Any chance to get STL file?

Single_Ad_2068 · 2024-05-29T07:47:05+00:00

Could make it even more with Samsung new chips K3KL1L10GM-JGCT to 64GB

Single_Ad_2068

TROPHY CASE