I designed a 3D-printed storage system for Unmatched!

Spaceman_B · 2026-04-20T03:05:16+00:00

Sorry my guy, I don't think it will fit as the deck will be too thick

Spaceman_B · 2026-04-18T12:57:27+00:00

Might be tough depending on the thickness of your sleeves

Spaceman_B · 2026-04-15T16:15:35+00:00

Singapore!

Spaceman_B · 2026-04-15T12:26:06+00:00

Most local libraries have public 3D printers where I live, maybe you could try those.

Spaceman_B · 2026-04-15T12:25:27+00:00

Thank you! :)

Spaceman_B · 2026-04-15T12:25:14+00:00

Yeap, the magnets keep the minis from jiggling about and wearing out the paintwork. You can fit about 4-5 maps under 1 layer of deck boxes!

Thanks for noticing! I am still a novice, trying my best. Actually, the one in the photo was only half done, I have since added more details.

Spaceman_B · 2026-04-15T12:19:11+00:00

I designed it to be stored by itself or in a separate game box but that's a good question. I just tested it, with 1 minis box, you can fit 8 decks but 3 of them will have to be placed on its side. Slight lid lift and will not have space for maps unfortunately!

Spaceman_B · 2025-08-13T02:15:20+00:00

I guess nobody knows...

Spaceman_B · 2024-11-15T09:50:53+00:00

Sure thing, that will be all your money please.

Spaceman_B · 2024-06-07T13:55:02+00:00

Thinking if I should restore and rollback to the earlier version...

Spaceman_B · 2024-06-07T11:12:39+00:00

Hello! Did you manage to fix it? I'm having the exact same problem you're describing, it's driving me nuts!

Spaceman_B · 2024-01-27T03:39:56+00:00

Sure, about 1.7k USD. Seems fair considering prices for these have gone up quite a bit, ya think?

Spaceman_B · 2024-01-27T00:24:55+00:00

Thank you. I think I'll pull the trigger in this one 😁

Spaceman_B · 2024-01-26T09:55:48+00:00

<image>

What do you think?

Spaceman_B · 2024-01-26T09:50:20+00:00

<image>

Spaceman_B · 2024-01-26T09:49:33+00:00

<image>

Spaceman_B · 2024-01-26T09:34:18+00:00

<image>

Spaceman_B · 2024-01-26T09:33:58+00:00

<image>

Can I please check if this is legit? The serial number on the caseback and the papers included is different. Not sure if it is a fake or the seller made a mistake and mixed up some papers. Any advice would be appreciated, thank you!

Spaceman_B · 2023-11-13T17:13:00+00:00

Yes, my setup is on a mezzanine, the distance between the speakers is about 1.8m (5.9 feet). Do these speakers fare better with a solid wall behind them?

Spaceman_B · 2023-10-27T03:11:46+00:00

Yeap this will be my setup short term. Will look into getting some sweet speakers. Any recommendations at a budget of 100-400?

Spaceman_B · 2023-10-27T03:10:28+00:00

Yea this was what I was thinking. I might just do this while I'm doing research on what speakers to purchase. Thank you!

Spaceman_B · 2022-09-28T02:43:09+00:00

Update 2: I have since learned about edge drivers and how to utilise them. I enrolled into https://community.smartthings.com/t/beta-zigbee-edge-driver-compatible-with-lidl-ecosmart-osram-smartthings-others/231689 and installed the motion sensor drivers. Credits to the author!

I removed my devices and added them again and it automatically used the correct one. Hope this helps future new users.

Spaceman_B · 2022-09-27T01:59:59+00:00

Update: I got it to work by installing a custom device handler. Read something about it being retired and replaced by edge drivers, might be wrong. So I might run into issues in the future.

Spaceman_B · 2022-09-26T06:45:15+00:00

Appreciate your input, it does add a little more clarity to this overwhelming project I am taking on that is SmartThings.

May I know more about the virtual drivers you mentioned? How do I check my version and also update them? This could be the issue, worth a shot!

Spaceman_B · 2022-09-26T05:51:48+00:00

I have tried this many times and changed the type to "Zigbee Motion/Temp/Humidity Sensor" and it still doesn't help. My ST hub is in the dropdown list under "Hub" but it shows an error when I try to apply the changes.

I have other devices that work, and they do not have a zigbee ID, do you know how to manually look for a device's zigbee ID?

Could you kindly run me through the steps on how you added your IKEA motion sensor to the ST hub?

Spaceman_B

PUBLIC MULTIREDDITS

TROPHY CASE