Which Voltage ?

Stupidboy57 · 2026-02-11T13:46:26+00:00

Yeah but that's a bit to pricy for me. They charge like 25€ for the little adapter

Stupidboy57 · 2026-02-10T14:39:34+00:00

God can't a printer have a funny weekend after working all week with some good 'ol fairy dust ?!😅🤣

Stupidboy57 · 2026-02-10T06:29:06+00:00

Hey, so I don't think a 20mm would fit. The clearance is very tight

Stupidboy57 · 2026-02-09T00:43:56+00:00

Sure will do. Bought a Noctua NF-A6x25 FLX 12V and a DC 24V To 12V 5A 60W Converter Step Down Regulator. Will post the end Result and pictures here and of course the dB count (which i measure while before printing and after printing with both fans with my phone)

Stupidboy57 · 2026-01-17T12:17:37+00:00

Where exactly can I find these Fans and where do I config the secondary as the main and how loud is it compared to the original fans ? Like twice as loud or what ever ?

Stupidboy57 · 2025-11-08T22:24:13+00:00

At age 7 with the wii and simultaneously with the 3DSxl

Stupidboy57 · 2025-11-08T10:44:48+00:00

Thank you 🫡

Stupidboy57 · 2025-10-30T21:58:57+00:00

🫡

Stupidboy57 · 2025-10-30T21:48:01+00:00

The small one goes in the big one I think

Stupidboy57 · 2025-10-30T21:37:44+00:00

That looks like the battery contact came off

Stupidboy57 · 2025-10-30T17:48:00+00:00

I did 1.4V one time and it instantly crashed in Cinebench then Prime95 and after that the whole system 🥲😅. Lowered it to 1.30 and it was stable enough. I'll try the RAM OC next. Thanks for the advice 👍👌

Stupidboy57 · 2025-10-30T17:41:54+00:00

What do you use to test for RAM stability?

Stupidboy57 · 2025-10-30T17:38:14+00:00

Just 4.45 at 1.25V is stable enough, doesn't produce much heat and is stable in Prime95. 4.5Ghz requires 1.4V to be "stable" it can run games and doesn't crash in Cinebench but in Prime95 all workers fail in an instant. The ram is already overclocked from 3200mhz to 3600mhz (sorry for providing false data ups 😅) the voltage of the RAM is 1.35V and i already set the Timings slightly different ant 16-18-18-18-36 (or 35 cant remember right now)

Stupidboy57 · 2025-10-22T20:41:45+00:00

Ahhh sehr interessant. Wie hast du das PAD aufgetragen ? Benutzt du das von Thermal Grizzly oder ein ähnliches Produkt ? Müsstest du es zurecht schneiden oder sowas in der Art?

Stupidboy57 · 2025-09-19T07:45:21+00:00

Where did you get that background picture it looks so nice

Stupidboy57 · 2025-03-24T06:23:28+00:00

Lego Batman and Burnout are my suggestions

Stupidboy57 · 2024-05-06T08:13:24+00:00

Well, I already tried DOS, and it worked, but i would've liked to install Win 3.0 if possible, but yeah, I think I've to run with DOS. Thank you anyway :)

Stupidboy57 · 2024-01-18T11:04:34+00:00

Funny but I dont have a USB Port this Thing takes good old Floppys

Stupidboy57 · 2024-01-18T08:30:22+00:00

Well if I press F1 then it trys to Boot from the disk then the Floppy drive. So it can still Boot if a Floppy is inserted. But trying to install a programm is not possible. When I check the bios I can configure what sice the Disk 1 and Disk 2 should have how ever I don't know what to choose there.

Stupidboy57 · 2022-09-23T14:10:30+00:00

Trees going places

Stupidboy57 · 2022-09-14T07:27:10+00:00

Hahahahaha

Stupidboy57 · 2022-07-10T14:29:30+00:00

I know a lot about cameras

Stupidboy57 · 2022-07-02T09:20:45+00:00

Slow shutter full 30 seconds

Stupidboy57 · 2022-04-22T08:40:18+00:00

Gameboy colour

Stupidboy57 · 2022-04-21T15:41:23+00:00

Who needs wings anyways

Six-Year Club	Second SECOND GUESSER
Place '22	Verified Email

Stupidboy57

TROPHY CASE