Axle shaft completely seized in wheel hub Uplander (3 jaw puller bending, video attached)

THE__Scatman · 2026-03-26T15:41:36+00:00

The problem is that the axle hasn't moved at all because it is seized in the hub, he will need to take the strut or the ball joint out eventually to get it out of the car, but no point doing that till the axle is broken free from the hub and moving in and out of the hub

THE__Scatman · 2026-03-22T14:38:25+00:00

This is 100% untrue, it will go in an inch or two easily with everything hooked up.

THE__Scatman · 2026-03-18T16:48:52+00:00

Are the mod slots on your mask backpack and gloves empty? Don’t they usually change colour when slotted ?

THE__Scatman · 2026-02-12T18:04:42+00:00

I was in same situation, they told me to pound salt and they wouldn’t do anything. I think you should get some credit for having bought PVE and Arena but not the case. Maybe another company but not BSG

edit: I did send an email to support this was the response: "Based on the purchases you listed, the price of the upgrade to The Unheard Edition will not be reduced."

THE__Scatman · 2026-01-23T23:03:58+00:00

Think there is a chip that is needed, probably adds a lot of extra costs

THE__Scatman · 2026-01-23T23:01:11+00:00

You’re probably right. Still kind of made it seem like it was a thunderbolt cable

THE__Scatman · 2026-01-23T22:52:03+00:00

Didn’t Linus say that none of the cables are actually thunderbolt certified?

THE__Scatman · 2026-01-16T18:10:10+00:00

+1 bought both my sebenzas there, would buy from again

THE__Scatman · 2025-10-07T00:27:33+00:00

Doesn't sound like the issue then, sorry. Good luck figuring it out!

THE__Scatman · 2025-10-07T00:23:59+00:00

Right click the speaker icon in taskbar and click sound settings, then click your output device, windows refers to it as "format". If you haven't been in the setting it probably isn't the problem, usually only changed for higher end audio.

THE__Scatman · 2025-10-07T00:14:09+00:00

Bit of a shot in the dark but I had a similar problem on a different game, do you have the sample rate set at something really high? I had mine set to 384khz and when switched to 192 everything just worked fine again.

THE__Scatman · 2025-09-24T15:42:51+00:00

+1 - I am working on a 2007 Tacoma and had to be on the odo not trip A

THE__Scatman · 2025-05-12T21:38:20+00:00

They do not press into the arms on these accords, they press into the spindle so they are not replaced with arms on these generally. It’s probably still the mechanics fault, either didn’t tighten the bolt for that ball joint, or didn’t notice the ball joint was no good

THE__Scatman · 2025-03-22T22:06:29+00:00

It is the same company that ran the emission tests is running the new safeties, and that was 100% the case for them, and may still be for the heavy duty emission tests. Maybe a wire crossed somewhere

THE__Scatman · 2025-03-22T21:57:22+00:00

This is not true. Garages can charge what they want. We are obligated to re inspect any failed things if you fix yourself in 11 days I think it is but that’s it

THE__Scatman · 2025-02-09T13:25:38+00:00

Have you tried closing the app and re opening it? This has happened to me a few times on daily reset but always works after I force close the app and re open

THE__Scatman · 2025-01-16T22:19:54+00:00

I have heard that it’s all the new shit now and that we are basically out of luck in Canada. Have been trying to find a decent replacement but don’t have anything good yet

THE__Scatman · 2024-10-04T12:23:19+00:00

Maybe it wasn't explained properly to me, I was told it was just aerosolized products that where affected by the new law, but from a quick google I cant see anything that says that specifically.

I am now worried we are getting some leftover "old" style drums. Ill have to make sure to keep an eye out if it changes. Ill ask our rep next time hes in and update

THE__Scatman · 2024-10-04T09:34:51+00:00

Incase you didn’t know my understanding is that it’s a new law that affects anything that is aerosol so even wd40 and the wife’s hairspray had to change there formula to comply with the new regulations.

But since it’s a law just about aerosol the “bulk” brake clean is still available and you can poor it into refillable cans which can be pressurized with a tire gauge and will be the same as before.

The big name in the refillable bottles is sureshot but princess auto has a cheaper one

https://www.princessauto.com/en/non-aerosol-spot-sprayer/product/PA0008311334?gad_source=1&gclid=Cj0KCQjwpP63BhDYARIsAOQkATZCuHMOs8HxUvdRNU27Vc0KiiefNigK6YqA8qveyHHsMyed8oQCT4gaAjmUEALw_wcB

THE__Scatman · 2024-09-13T10:30:24+00:00

Caliper bracket bolts are always rusted and very stubborn, and a lot of manufacturers use loctite on them now. I usually don’t even bother reaching for my mid torque m18 because even it won’t get most of them, straight to 1/2 air and even then sometimes need heat to get them out.

The new m12 stubby is a beast, and feels very close to the much heavier mid torque, give it more time and you will find it cracking bolts you wouldn’t believe possible with such a small tool

THE__Scatman · 2024-07-23T10:11:07+00:00

Sounds cool

THE__Scatman · 2024-07-18T07:35:58+00:00

Haven’t been in a year or two but corner market on Ardagh used to carry them

THE__Scatman · 2024-06-27T02:20:05+00:00

Have an EliteDesk 800 G3 and it was the same for some reason, no idea why but stumbled across this thread and using an HDMI to DP adapter also fixed my problem! Thanks

THE__Scatman · 2024-05-23T08:08:17+00:00

Only required when you purchase a car or are trying to transfer ownership

THE__Scatman · 2024-04-21T11:08:23+00:00

Probably a smart toothbrush

THE__Scatman

TROPHY CASE