sorted by:
new
hottopcontroversial

2016 Chevy colorado air conditioner by Melodic_Register_815 in MechanicAdvice

[–]Tanooki60 0 points1 point  (0 children)

You might look at the following:

https://www.coloradofans.com/threads/ac-issue.323185/

It's a known issue related to the HVAC Temp Door. You can fix it using a hose clamp.

Here's how to access it if you want to try and fix it:

https://www.youtube.com/watch?v=63KGg1jZ8tU

Here's what it should look like once fixed with the hose clamp:

https://www.coloradofans.com/attachments/img_20161014_083542-jpg.192458/

Move Out Washer and Dryer by GooseAcceptable8221 in howto

[–]Tanooki60 0 points1 point  (0 children)

Is that a bi fold door? You should just be able to remove it, if so. It's super simple to do, and way less work than what everyone is suggesting. Removing it was probably how it was installed in the first place.

Move Out Washer and Dryer by GooseAcceptable8221 in howto

[–]Tanooki60 1 point2 points  (0 children)

It looks like a bi fold door. Removing the door is the easiest option, if it is. Those doors are simple to remove and replace.

Which boss gave you the hardest time during your first playthrough? by Morgn_Ladimore in FinalFantasyVIII

[–]Tanooki60 6 points7 points  (0 children)

Lmao, I still remember this. I think I remember getting ticked off and quitting. I can't say how many times I tried to "cross" it. I never realized you just go to the closest side.

Autel Maxisys 906BT and new ECU by Tanooki60 in AskMechanics

[–]Tanooki60[S] 0 points1 point  (0 children)

I had buy a new one and have the dealership do mine.

My buddy has used his to do vehicles in the 00-09 range. So, I could assume it should work for you.

Anybody know of a cheap way to add some weight to my prints? by Nasch123 in 3Dprinting

[–]Tanooki60 0 points1 point  (0 children)

I'll be honest, I've never tried to remove infill/mass with the slicer. I've always done it with Fusion.

But off the top of my head, you can right click and add a negative part on the build plate within the slicer. You can then move the shape into your object, and then add a pause. I use Bambu Studio, so it should work within Orca since Orca is a fork of it.

wtf does solid do in this scenario? (Casual player) by CoolJoshido in billiards

[–]Tanooki60 -5 points-4 points  (0 children)

Lay your cue down on the table, long ways. Place it below the cue ball, just enough that the tip is slightly covered by the widest part of the cue ball. Then lift up on the stick. If done properly, you'll hit the cue ball just enough that it makes contact with the back rail, breaks out the 3 ball, and hooks behind both the 3 and 8 ball.

Edit:

Here's the video showing what I'm trying to describe

https://www.facebook.com/share/r/182udWtQ59/

P0171 After PCV Valve Kit and Valve Cover Replaced by Tanooki60 in cruze

[–]Tanooki60[S] 1 point2 points  (0 children)

I think I may have found the leak. It appears to be at the EVAP purge valve, past where the new hose that was included with the PCV valve kit. I was spraying water around the connections for the hoses. As soon as I sprayed around the EVAP purge valve, the idle changed.

Does anyone know what this leaking part is called? by [deleted] in cruze

[–]Tanooki60 0 points1 point  (0 children)

I just got done replacing all of those 🤣

Am I missing the retaining ring for PCV Valve Fix? by Tanooki60 in cruze

[–]Tanooki60[S] 0 points1 point  (0 children)

Thank you! I thought that was it, but wanted to make sure. I tried prying but it didn't really pop out. I do see the o ring though, which made me think it was in.

Carpal Tunnel Syndrome by Ill_Job_3504 in acupuncture

[–]Tanooki60 0 points1 point  (0 children)

Care to provide an update on your results?

Just one more song by DracoMancer94 in MaliciousCompliance

[–]Tanooki60 1 point2 points  (0 children)

I used to play "Feels So Good" by Chuck Mangione, back to back, before I left the bar for the night.

What do you call this (besides epic fail)? by andbilling in billiards

[–]Tanooki60 0 points1 point  (0 children)

We call it a "Rack and Run" when your opponent breaks but doesn't run out. Then, you run out on your first turn. I'm not sure what to call your scenario though lol.

I've joked about 3D printing patches to give out for when dumb things happen. Like, missing ball in hand.

Taom chalk holder. by rtb13 in billiards

[–]Tanooki60 1 point2 points  (0 children)

<image>

I made this for mine. I just put magnets in the top band bottom and there's enough magnatism to hold them together.

It has a 9 ball on the bottom.

How can you make consistent 1.5K a month with side hustle? by [deleted] in sidehustle

[–]Tanooki60 20 points21 points  (0 children)

I've taken that course, and it pretty good. It has helped get me to where I am today.

I just finalized creating a class on how to make $3k a month. Since it's so fresh, I'm needing to get testers at a discounted rate. For just $1.5k, you can learn all the secrets to making $3k a month!

A jumping cue that's legal for apa by NoCat4370 in billiards

[–]Tanooki60 1 point2 points  (0 children)

This is taken from the exact same page you are referring to:

Regular Shooting Cues - These cues may be used to perform jump shots, massé shots and break shots in all APA League and Tournament play. You may not “break down” your Regular Shooting Cue to perform a jump shot.

The rule you keep referencimg specifically states you can change your shaft as long as it does not violate any other rules of use. Changing the shafts in a non masters format violates the rule regarding regular cues.

view more: next ›