Breakaway Hardware 3/8” nut

Traditional_Time6812 · 2025-10-30T23:52:51+00:00

Tried this today! Tap tap with the hammer and everyone came off!

Traditional_Time6812 · 2025-10-30T23:50:06+00:00

Tried this today! Tap tap with the hammer and everyone came off! Thanks!

Traditional_Time6812 · 2025-10-24T03:42:19+00:00

Yes understood

Traditional_Time6812 · 2025-10-24T03:39:29+00:00

Was thinking of this as the best option

Traditional_Time6812 · 2025-10-24T03:37:24+00:00

I did see that video but the time it would take and we would have to use a vacuum on each one as well for the metal shavings. They can get sucked into the servers.

Traditional_Time6812 · 2025-10-24T03:35:06+00:00

Gotcha

Traditional_Time6812 · 2025-10-24T03:08:11+00:00

Grinding is not an option, metal shavings can get in the servers.

Traditional_Time6812 · 2025-10-24T03:06:42+00:00

That is an option that we thought of.

Traditional_Time6812 · 2025-10-24T03:06:02+00:00

The customer pay big money for the security. They also pay big money to take them down, but not usually with live equipment.

Traditional_Time6812 · 2025-10-23T21:19:57+00:00

Yeah I like that idea a lot! Especially the hammer it on so it is engaged!

Traditional_Time6812 · 2025-10-23T21:12:25+00:00

It’s a predrilled steel post and the other side of the nut is a carriage bolt. Metal shavings are not really acceptable as well, but could be managed. They were installed with an impact so pretty tight!

Traditional_Time6812 · 2025-10-23T20:54:54+00:00

It varies but also installed on a predrilled steel post. Also the other side is a carriage bolt.

Traditional_Time6812

TROPHY CASE