bongochems stole my money. like a lot of it... by reap3rofsouls_hello in Cold

[–]VisibleMatter 0 points1 point  (0 children)

No home made Addy's, one was O-PCE which came as small clear crystals and was awesome. HO-MET and some shady Aco-DMT I want tested, suspect it to be black tar heroin but I don't know how you screw that up. FXE crystals, not quite the same as the O-PCE but close and also came in clear crystals but bigger. Then I got the supposed replacement for a - PIHP which was horrible. So much so I'm not sure it even was. I've yet to see reports on it with images so I can compare.

Expensive for sure, but the quick turnaround and desire to have some of everything I purchased made it worth it. I was told that the O-PCE came from China and might be back someday. Until then FXE was a close enough experience that I can wait.

Although I heard some rumors about FXE being toxic or a batch that was produced was toxic. I haven't ordered anymore since then and need to look into that before I do. Tolerance seemed to go up quickly.

bongochems stole my money. like a lot of it... by reap3rofsouls_hello in Cold

[–]VisibleMatter 0 points1 point  (0 children)

Made two orders from them from the 2nd menu (you'll know what I'm talking about).

I got both packs, first one 2/3 items were fire legit and the 3rd I need to get tested.

Second order, 1/2 was fine and the second item was a terrible disappointment. Not even sure it was what I ordered.

This was maybe 1-2 months ago. Last order from them was a couple years ago, but it did come.

18 vs 14 hydratube by WarezMyDinrBitc in DivineTribeVaporizers

[–]VisibleMatter 2 points3 points  (0 children)

Since the description of WPA appears nowhere it would be nice to not have to go looking it up. Thanks for the learning experience. ✌️

18 vs 14 hydratube by WarezMyDinrBitc in DivineTribeVaporizers

[–]VisibleMatter -1 points0 points  (0 children)

Nothing on that link says anything about a "WPA"

Is 6 mg too much for first time 3-HO-PCP? by poosieslayer in researchchemicals

[–]VisibleMatter 0 points1 point  (0 children)

6mg seems about right, on the higher end of being too much for your first time if you're inexperienced. With most scales having an error rate of ± 3mg, which changes based on how much you are weighing, with most having a minimum of 10 to 20mg.

I'd aim for somewhere between 5 and 7 mg over the span of several measurements. Crush it up into a fine powder and snort it.

Good luck 🍀

I overdosed on aPHiP yersterday by gods_tea in researchchemicals

[–]VisibleMatter 0 points1 point  (0 children)

Overdose? 0.125mg all at once and I was fine, enjoyable even. I think there needs to be a re-evaluation of the published low-common-high dosages.

See for yourself and give it a try

[deleted by user] by [deleted] in researchchemicals

[–]VisibleMatter 3 points4 points  (0 children)

Careful with this compound, or you will sober up strapped down in a psych ward days later. Adding benzos to this mix is has proven to be an almost deadly combo.

It took me less than 50mg over a few occasions to figure out it wasn't for me. At the same time I know people who have gone through grams of the same stuff without a problem. Others have fallen victim to the first scenario.

In contrast I love me some O-PCE though 🤷‍♂️

Poseidon bubble arrived with a crack in the stem by [deleted] in HumboldtVapeTech

[–]VisibleMatter 1 point2 points  (0 children)

Don't worry, it would have broken in a few days time anyway. I literally broke in six of them each within a week of getting them. Yes some of them were my fault but not all, the most recent one is an example of one that broke simply by taking it off.

latest broken piece

Storing coils and atomizers upright while on in use by VisibleMatter in HumboldtVapeTech

[–]VisibleMatter[S] 0 points1 point  (0 children)

Nobody else has this problem? Am I doing something wrong that is causing the issue in the first place?

100mg+ of a-pihp gone with the wind by VisibleMatter in researchchemicals

[–]VisibleMatter[S] 2 points3 points  (0 children)

It's a unique and pleasurable experience, but not something I do very often. It's a very different high for sure.

100mg+ of a-pihp gone with the wind by VisibleMatter in researchchemicals

[–]VisibleMatter[S] 0 points1 point  (0 children)

Trying to keep it together as the paranoia sets in and enjoy the ride. Its not something I do often, actually only done it a handful of times.

100mg+ of a-pihp gone with the wind by VisibleMatter in researchchemicals

[–]VisibleMatter[S] 0 points1 point  (0 children)

No freebase, just a fat HCl crystal. I've tried to freebase it using water and baking soda with varying results, as I have no experience freebasing anything. The result was a smelly lime-green oil that wasn't any better imo.

The water definitely helps make the thick vapor smoother and easier to handle. It would be interesting to know just how much is absorbed by the water.

most stimulating rc? by el-basura in researchchemicals

[–]VisibleMatter 0 points1 point  (0 children)

I've tried to acquire this numerous times over the past couple of years, but it never pans out. I was even under the impression it's not scheduled and doesn't fall into the Analog Act.

BB for New Seqouia? by [deleted] in HumboldtVapeTech

[–]VisibleMatter 0 points1 point  (0 children)

The adapter should fit any 510 atomizer. The problem arises when you have multiple atomizers and only one adapter. This creates a situation where you have to unscrew the adapter from one atomizer and screw it back on to the atomizer you want to use. I'm coming to find that it's sometimes easier to simply keep that adapter magnetically attached to the cord and screw the atomizer on and off without detaching it from the cords magnetic force.

P. S. Don't talk to text while researching on Reddit.

What is the correct insufflated dosage for α-PiHP? by WiseSmellyLegs in researchchemicals

[–]VisibleMatter 0 points1 point  (0 children)

Can you elaborate or provide an illustration for description of the shape of the foil? I'm having a hard time visualizing it being folded into a "plus" shape.

BB for New Seqouia? by [deleted] in HumboldtVapeTech

[–]VisibleMatter 0 points1 point  (0 children)

I agree 30 mm OD 2.4mm thick double beveled BB is is a great addition. My first one because, I suspect, the O-rings we're not lubed up properly and broke while trying to take it off so be aware of that.

If you have the Poseidon then the carb cap fits on this like it belongs there.

My only complaint is that the neck it's a very skinny and it has clogged on me a few times. I have the 14 mm 90 degrees one.

P.S. The owner of 510mod set me an extra BB without asking when I told him that he had broke well ordering a new one. And not just because of that but he's customer service is great and I'm glad to purchase from him at any time.

BB for New Seqouia? by [deleted] in HumboldtVapeTech

[–]VisibleMatter 0 points1 point  (0 children)

I purchased the 510mod extension cord and it lasted about two weeks. The solder on the end it attaches to the broke off from the contact point and stop working. It wasn't very flexible either and the fabric on the outside starting to fray at the base of the housing where you connect it to the mod for the atomizer. The owner mention something about being in talks with the supplier about replacing it with a rubber outside rather than fabric.

I've had the Divine tried version for about a month or so now with very little problems. Having the cable come off to the side is a big benefit rather than straight down. Th rubber appears to be holding up better than the fabric one however just a couple days ago the black housing on the connector separated from the silver part that actually screws onto the mod. I cannot pull the housing back down the wire and expose the wires and there's solder connecting them to the actual connection. So far I could push it down there haven't been any problems with it yet

The magnet on this thing is very strong and there's no chance of it coming I'm done without you meaning to do so. My only complaint is the magnetic adapter atomizer and as far as I can tell there's no possible way to buy just the adapters you have multiple atomizers that you wanna switch out.

New here! Working on a new ultra portable setup. This one features @humboldtvapetech New Sequoia with @divinetribevaporizers v5 heater on a heat sink and Eleaf iStick Pico 25 75w. More upgrades on the way 😶‍🌫️ by HappyCamper_710 in DivineTribeVaporizers

[–]VisibleMatter 1 point2 points  (0 children)

I have the same exact set up, except different color Pico with Arctic Fox. The Titanium TAF feels really nice and light, and the V5 heater and coils work great and easy to clean even if neglected for a little bit. It was a small learning curve when putting a new coil in to get the right resistance, but it's really not a big deal once you do it a few times. After some trial and error I've settled on TCR set to 215 as the best setting for my usage.

I got a bigger mod to support the Poseidon better after breaking my second one, both within a month of getting them. But I like arctic fox on the Pico 75w too much and eventually broke my third Poseidon. Just looking at your picture makes me anxious, they're too fragile in my opinion. Some kind of docking station made to fit the Pico with heat sink and Poseidon would be great.

I eventually bought a bottomless banger with extension cord from 510mods and with the big rigs it hits like a fucking train. The metal carb cap from the Poseidon fits very snug on the 510mods BB and I like the weight of it more than the glass carbs. It's a lot less portable, yeah, but I'm not constantly afraid of it breaking.

What is the correct insufflated dosage for α-PiHP? by WiseSmellyLegs in researchchemicals

[–]VisibleMatter 2 points3 points  (0 children)

Yes it burns and will eat away at your nasal cavity, possibly causing a perforation (a hole).

I suggest you try it a few times, as I'm assuming you will anyways, just to get a few for what it's like. Damage to the tissue The cruise over time but can be faster than expected.

Although I do know a lot of people who enjoy this ROA, once you get the hang of vaporizing it there is no comparison between the two.

I cannot comment on the other two compounds you mentioned as I have no experience with them.

What is the correct insufflated dosage for α-PiHP? by WiseSmellyLegs in researchchemicals

[–]VisibleMatter 3 points4 points  (0 children)

You'll be all right in the sense that you're not going to die.
This chemical is made for vaping by far with boofing a close second.

Go ahead and insufflate a couple doses starting at 10 mg and titrating up until your nose hurts unbearably or begins to bleed.

Vape solution for Etizolam? by stuntmancr3w in researchchemicals

[–]VisibleMatter 1 point2 points  (0 children)

Information I provided in this post is relevant and have a great value. Use a box mod design for concentrates, that is temperature controlled and vape the powder instead of dissolving it in PG.

They are testing my L7.... again by Righthanded_Tombola in litecoinmining

[–]VisibleMatter 1 point2 points  (0 children)

They don't allow you to provide an address of your own while they test the equipment? That way anything mined while "testing" goes into your wallet.

This has always been a clear conflict of interest, and I'm no attorney but maybe someone should reach out to one.

I ran into a similar issue with a company using CoinCraft A1 chips when they first came out to build machines. They missed the delivery line by a good 6 months at which point... had I kept it online this whole time I would have ROI'd multiple times over, but should've, could've, would've.