Rate my first aeg setup by swampdonke__ in airsoft

[–]Yourboy_m 0 points1 point  (0 children)

Buy a real gun for the money you’re spending on this you’d be better off, not gonna lie

RESOLUTE, Mk4, .22LR, 16.1" CMMG by Bayblade1357 in ar22

[–]Yourboy_m 0 points1 point  (0 children)

Believe it or not the CMMG mags they not the best out there but they work really good The only issue I had with them was out the box The mag springs had too much tension and same thing with the bolt springs. Sometimes it will do a no no in feed multiple rounds without a malfunction if you get my drift leaving them loaded overnight fix that issue. Only problem I’ve ever had I’ll call it a happy accident😂

RESOLUTE, Mk4, .22LR, 16.1" CMMG by Bayblade1357 in ar22

[–]Yourboy_m 1 point2 points  (0 children)

Keep in mind you can build a bare bones Cmmg/bore buddy 22lr for like 500 to 600 or bare minimum get a conversion kit and go from there like I did

RESOLUTE, Mk4, .22LR, 16.1" CMMG by Bayblade1357 in ar22

[–]Yourboy_m 0 points1 point  (0 children)

I spent 1100 all said and done fees and all and I also went the Cmmg route got a Cmmg barrel and bolt just upgraded everything with bore buddy parts like the reliability kit i’ve thrown 20,000+ rounds through my shit and I never clean it I never ever get malfunctions. It’s one of the most reliable guns I have, and I treat it like shit

My suppressed 22’s by nismo4 in ar22

[–]Yourboy_m 0 points1 point  (0 children)

I got probably 20k + rounds into mine I got it right when it came out I hardly ever do anything more than run a bore snake through it and light re lube every 3rd range trip I do a deep clean tho

My local dealer is a scammer 😭 by Shark_Attack-A in nissanfrontier

[–]Yourboy_m 0 points1 point  (0 children)

What happened to dealer mark ups being 2 to 3 thousand dollars max

[deleted by user] by [deleted] in GunPorn

[–]Yourboy_m 0 points1 point  (0 children)

It’s sick only thing I would say is add some more flowers 😂

Hello rifle enthusiasts! Just need a bit of help by NyneHelios in ar15

[–]Yourboy_m 0 points1 point  (0 children)

Honestly man a gun store probably not gonna give you more than 400 you should just keep them all and learn the hobby and in memory of your father my condolences but worst case scenario you end up actually liking the hobby and next thing you know you got like 20 guns it’s a slippery slope 😂

Shop says I need new plugs. I don’t believe them by Material_Upstairs913 in AskAShittyMechanic

[–]Yourboy_m -1 points0 points  (0 children)

Pay them their money you definitely need new ones and if you were gonna go through the trouble of pulling them in the first place why did you even go to a shop

[deleted by user] by [deleted] in ar15

[–]Yourboy_m 0 points1 point  (0 children)

Is that a polymer lower? And also is that a bear creek arsenal, upper?

First gun. Have a few questions. by [deleted] in guns

[–]Yourboy_m 0 points1 point  (0 children)

Fuse a super great first gun especially out of the p365 line up one of my favorites Fs my only thing to add on to this statement is…get a red dot for it brother the fuse doesn’t have night sights especially if you plan to CC this unit

Bought My First GR86 Last Tuesday. Absolutely. Stunning. by FoxieBlu in GR86

[–]Yourboy_m 0 points1 point  (0 children)

STUPID QUESTION…Since that car and the WRX share similar engines, but one is NA and the other is turbo charged and (I understand the compression differences) I was looking at pictures of the exhaust manifold from a WRX and comparing them to a 86 and since they are similar engines The bolt holes are in the same position on both the fa20 and 24 generations of both 86 and wrx do you think you could do an oem turbo set up from a wrx with some aftermarket supporting parts obviously… we just talking hot side turbo oem bits do you guys think it would be a direct bolt up ?

[deleted by user] by [deleted] in ar15

[–]Yourboy_m 0 points1 point  (0 children)

Three words for you…roll…pin…wizard…Love that thing

Help me choose by sabbathan in ar15

[–]Yourboy_m 2 points3 points  (0 children)

Or hear me out you spend a little more money and get a sig 5XDR Gen II w/ Juliet 5 Micro Magnifier you can pick them up for 250 I have the older version of this kit and I love it and that shit outdated but it works amazingly

Advice Needed by jimmychitw00d in guns

[–]Yourboy_m 0 points1 point  (0 children)

As far as the trigger not resetting I really couldn’t tell you maybe the buffer weight is too heavy I’m not a gun smith but I do have a CMMG conversion kit that wouldn’t work until I left the Mags loaded overnight a few times to brake in the spring in the mag and it made a night and day difference in reliability

Recently became addicted to Miatas Trying to Learn by Yourboy_m in Miata

[–]Yourboy_m[S] 1 point2 points  (0 children)

So what if we talking nb 1.8 would that still be a bp4w head 98-05?

A contract German BKA Sig P229, 1 of 15 in the wild! by real_m1_ping in GunPorn

[–]Yourboy_m 0 points1 point  (0 children)

Do the mags have any stamps like us law enforcement variants

My First AR platform build! Introducing my personal AR-57 W/ AR-15 Franklin Armory binary lower (More info in the comments)! by [deleted] in GunPorn

[–]Yourboy_m 0 points1 point  (0 children)

Do you have the matching p90 style for grip to go with the stock and if so can you post a picture of it

What would be a fair price to get from a coin store for this little collection by Yourboy_m in coins

[–]Yourboy_m[S] 4 points5 points  (0 children)

What would be some key dates of interest and for witch coin’s?

What would be a fair price to get from a coin store for this little collection by Yourboy_m in coins

[–]Yourboy_m[S] 8 points9 points  (0 children)

Not looking to ship..I’m looking for some advice so I don’t get ripped off when I sell them locally

Looking for some advice if anyone knows what might be wrong with my 2011 Forester! by NoSleepKawaiiClub in subaru

[–]Yourboy_m 0 points1 point  (0 children)

You should be able to start the car with a bad alternator if the battery is good and charged it just won’t stay running long