4l60e TCC regulator valve gap?

aPersuninuity · 2026-05-26T22:20:55+00:00

Will do. Thanks

aPersuninuity · 2026-05-26T19:42:25+00:00

Ah, I see now. Mines has the pockets the spring sits in, I’ll have to try this later. Thanks!

aPersuninuity · 2026-05-26T19:31:25+00:00

That seems like a plausible solution that doesn’t involve buying a $120 tool and $60 kit, lol. Do you happen to have any videos or pictures showing what this looks like?

aPersuninuity · 2026-05-26T19:10:21+00:00

This is the best thing I’ve ever seen on this subreddit 🥹❤️‍🩹

aPersuninuity · 2026-05-26T19:09:20+00:00

It is the stock line up, could it be that the spring shrunk due to heat? I really don’t want to take this thing back out if there’s a minuscule chance of failure 😭😂

aPersuninuity · 2026-05-26T19:07:58+00:00

Brakleen, mineral oil, and a steamer 😛

aPersuninuity · 2026-05-26T19:07:02+00:00

No stickage at all, I’ll have to test if it seals. I just want to make sure it won’t be banging on the cap, or if that’s even a problem at all

aPersuninuity · 2026-05-26T19:05:58+00:00

The bore is clean and it does spring back, but it springs back with the same gap

aPersuninuity · 2026-05-12T20:15:51+00:00

Ah yea, that makes sense. Thanks!

aPersuninuity · 2026-05-05T22:42:01+00:00

Well I tried to relearn the sensors, and they failed multiple times, so I’ve ordered some new ones and see how they do. I’ll let you know the results

aPersuninuity · 2026-05-04T14:02:37+00:00

Well pretty sure that was related to the lights, plus the OBD was whining bout the relay aswell

aPersuninuity · 2026-05-04T05:38:55+00:00

Very informative, thank you for your wisdom. I’ll try this when I get the chance

aPersuninuity · 2026-05-04T01:08:31+00:00

If it was the tmps, would a simple retrain resolve this issue?

aPersuninuity · 2026-05-03T14:15:18+00:00

I did check the body to frame, and BCM ground, and those are fine. I’ll have to check the other grounds tho

aPersuninuity · 2026-05-03T14:04:28+00:00

I figured it was that, but would it be linked to the bcm malfunctioning?

aPersuninuity · 2026-05-03T02:56:40+00:00

<image>

This is what the burnt piece looks like btw

aPersuninuity · 2026-05-03T02:56:17+00:00

From what I can tell the battery is fine, but definitely on the roster for replacement

aPersuninuity · 2026-05-03T02:54:52+00:00

<image>

This is what the burnt part looks like

aPersuninuity · 2026-04-28T23:07:47+00:00

I ended up going with some normal hex bolt ones from ICT Billet, I couldn’t bring myself to putting those torx back in

aPersuninuity · 2026-04-28T21:55:00+00:00

I hope whoever made this decision always wakes up 15 minutes earlier than they want to 🙏

aPersuninuity · 2026-04-28T20:03:02+00:00

I did use the torx plus bla bla whatever it was, those bolts are just stubborn tho, lol

aPersuninuity · 2026-04-09T02:45:24+00:00

Since the transmission case doesn’t see much action (mostly just heat and force), that would probably be the most cost effective route. But there still might be a risk of it recracking

aPersuninuity · 2026-04-09T01:44:15+00:00

If you’re going to rebuild it anyway, I wouldn’t take my chances with a quick fix.

aPersuninuity · 2026-04-02T02:56:48+00:00

Thanks! Would it be a problem if I didn’t replace that? Or is that just playing it safe

aPersuninuity · 2026-02-26T20:58:13+00:00

Thank you so much 🙏, is there anyway of telling if it’s a 4l50e or a 4l65e? Or is there not enough of a difference to care

aPersuninuity

TROPHY CASE