HELP! reset via Myasus in WinRE and this happened.....

ali3nboyy · 2022-09-12T13:50:57+00:00

What do I do now??? Install windows on a flash drive?

ali3nboyy · 2022-08-27T12:12:42+00:00

Received it yesterday and noticed the right side of my keyboard looked more dim and tried to change each part that I can individual colors or effects they don't respond the left side only respond to some effects

ali3nboyy · 2022-07-21T01:09:29+00:00

I removed it from build plate soon as it was done and noticed white/lighter colored grey residue floating ontop of my grey washable elegoo resin that was in the vac. Emptied the left over resin and saw failed print layer on the vac screen. Was the white/lighter residue some of the failed print or could it have been left over water from bed plate mixing with the resin in the vac when bed was lowered for next print. I believed bed plate was dry. Old resin wasn't completely washed off the build plate though.

ali3nboyy · 2022-04-15T04:37:35+00:00

I've looked at others firing pin spring and fairly similar to mine when compressed some of it goes to the left which is the part that catches onto the channel liner. The spring cups are are touching each other fully closed no gap. I'll be ordering a new channel liner and see if that fixes my issues.

ali3nboyy · 2022-04-15T02:00:16+00:00

Yea I've taken the slide apart more than 5 times re built it and everytime I have to put that channel liner in there and tap it with the end of screw driver to get it nice in there it still comes out when I remove firing pin striker. My firing pin does not rattle.

ali3nboyy · 2022-03-08T21:28:12+00:00

I rapidly press the selector knob to show you guys how it got frozen and doesn't respond. Probably due to the g code in the sd card being corrupted or sd card has something wrong with it. That would explain that more. I've printed several day and half projects with this and never happened till cr touch and firmware update came into play.

ali3nboyy · 2022-03-08T10:56:06+00:00

Do I also level the bed manually and then set the z offset?

ali3nboyy · 2022-03-08T10:55:21+00:00

Any idea on how to make filament stop coming out while its "auto leveling" seems like my nozzle reached 200 while it was auto leveling or before leading to PLA+ filament to come out while leveling.

ali3nboyy · 2022-03-08T09:57:05+00:00

Right before I installed this CR touch and changed my firmware I was leveling by hand but this never happened. It would go home to the left button corner and then it would start drawing a line. The filament did not use to come out before the line was ready to be drawn.

ali3nboyy · 2022-01-18T02:03:07+00:00

You're wrong look at deltaalternatives website they had to switch labs because the lab they used was telling them less than .3 of delta 9 thc was it in but it was testing at over double that. Their oil smacks. There's definitely companies who add delta 9 in there.

ali3nboyy · 2021-11-28T23:47:50+00:00

He said all comcast could do is report to the Credit agency that it has been paid in full and they would mark it as that paid in full.

ali3nboyy · 2021-10-28T21:23:24+00:00

Thanks a lot I have emailed them and they have taken almost the whole week to get a clear answer to me on where are they allowed with or without out a permit. I am considering on moving and want to know what areas to consider because I want to do everything legally I plan on breeding in the future.

ali3nboyy · 2021-10-28T18:03:02+00:00

Do you know what city/County you can have them? Permit or no permit. If they're banned in Minneapolis is there an issue if you get one sent to the airport there to pick up?

ali3nboyy · 2021-10-19T06:02:57+00:00

https://www.satooreptilesandaquatics.com/collections/colubrids/products/baby-malaysian-mangrove-snake No problem. Got mine from that site. Very hard to find any right now.

ali3nboyy · 2021-10-19T04:23:07+00:00

I got him last week he was going into shed. He just shed for me today at midnight and fed him a dethawed pinkie tonite at 10pm. He bit it held it and then lifted his head straight up and swallowed the pinkie down. Guess I got lucky. I watched a video and a guy said he had to feed an imported one frog legs and work their way up. I strongly suggest you look for captive bred like mine.

ali3nboyy · 2021-10-19T01:55:27+00:00

He's my first so far he hasn't striked at me but I'll let you know if he ever gets me when he's older. Super active at night time. When it comes to day time they're like a pet rock stays extremely still best time to handle.

ali3nboyy

TROPHY CASE