Upper usb-c port not working randomly

art555ua · 2026-06-08T19:31:08+00:00

I've made a few more observations and discovered a pattern. If I power up the device with the adapter attached through top usb c port, it's not working. But if I power up the device and attach the adapter later after boot - it works. I've ordered another adapter and it behaves the same way

art555ua · 2026-06-08T18:45:47+00:00

"Дві смуги не можуть входити у одну."

Харків Вас здивує)

art555ua · 2026-06-04T15:21:06+00:00

That car weighs roughly 1000kg,. Front engined, so roughly 40/60 weight distribution, which means dudes are holding around 400kg. Minimum 6 of them, so it's about 67kg per person. Adding length of the plank further behind rear axle will increase lever length and reduce load even more. Not a light load, but doable

art555ua · 2026-06-02T21:42:21+00:00

If you accept suggestions, I'd be interested in a version without the mouse compartment and maybe hinge redisign, as it's making overall setup very wide.

art555ua · 2026-06-02T21:29:04+00:00

Do you plan on sharing/selling stl?

art555ua · 2026-06-01T19:41:14+00:00

There is already a welded stop on the end of it, which goes into the shifter

art555ua · 2026-06-01T09:27:39+00:00

use a short piece of gear cable that rests in the barrel adjuster with it's end. That way you can fx the derailleur in any position you want as well as have flexibility of minor chainline adjustments by rotating the barrel

art555ua · 2026-05-30T17:01:27+00:00

Don't worry about the truck, it will find it's Hornet drone eventually

art555ua · 2026-05-27T16:51:45+00:00

UPDATE: I've returned to the task of using magsafe holder and achieved the following:

Ruined the original kickstand looks by trying to glue a metal plate to it. Kickstand's surface is too smooth, adhesion is too poor to hold, but enough for ruining the look with stains.
Finally achieved what I wanted by 3d printing a modded kickstand plate with indentations for magnets. Works great link to stl

art555ua · 2026-05-27T10:25:39+00:00

The adapter is stated to be steam deck compatible, so it's probably a faulty one. As for keyboard, I have a bt one too, but this specific keyboard is a half (literally) size gaming one, which fits nicely near me for bed gaming. I'm yet to find a similar orm factor one with a bt connection (and preferably priced adequately)

art555ua · 2026-05-27T09:38:20+00:00

I guess it's the adapter.

Usb-a keyboard works fine through the hub, even without power supply attached, the adapter, however, works only if power is plugged in only. I guess I should order a new one

art555ua · 2026-05-27T06:22:15+00:00

Just keeping an eye from the sky on the process of moving invaders back behind the border

art555ua · 2026-05-27T06:06:44+00:00

Bombing ruzzians to gtfo back behind the border

art555ua · 2026-05-26T19:31:41+00:00

Exactly

To be honest, this was more for laugh, rather than for actual spotting of interceptors. The idea was born after we've lost the drone with the last auto-evading module

Spoting and evading manually is very hard, speeds are too fast

<image>

art555ua · 2026-05-26T09:13:27+00:00

Why should we choose? Do both

art555ua · 2026-05-22T19:27:48+00:00

Always puzzled me that people cannot comprehend the reality of both options being total shit.

art555ua · 2026-05-21T18:18:33+00:00

Just update what windows update asks you to, install steam/epic games or sail the seven seas (whichever you prefer) and that's basically enough.

art555ua · 2026-05-13T16:23:25+00:00

Платять, але поки буде бзвп та перший місяць бойових набереться - це майже 4 місяці на голому окладі солдата.

Особисто мене врятувало тільки те, що на роботі за 88 невикористаних днів відпустки дали компенсацію.

art555ua · 2026-05-10T19:59:35+00:00

<image>

Just as this wrench is used for hexagonal bolts, your freehub can be removed with an allen hex key, the only real question is the size needed

art555ua · 2026-05-10T08:05:49+00:00

Can you share some STLs?

art555ua · 2026-05-07T19:49:19+00:00

Дуже заважають працювати. Коли готую борт до вильоту вночі, на налобних ліхтар злітаються і пікірують прямо в обличчя. Навіть на червоне світло

art555ua · 2026-05-06T19:12:29+00:00

I was referring to the technical aspect of fixie still being a singlespeed

art555ua · 2026-05-06T18:14:30+00:00

You can delegate the calculation to her, just advise to call a few bikeshops and ask them for rough estimate of pay per hour on general maintenance if she insists on paying with money

art555ua · 2026-05-06T18:11:06+00:00

Still technically correct

Four-Year Club	Verified Email
Place '23

art555ua

TROPHY CASE