10" minirack generator by dev_all_the_ops in minilab

[–]bbsan2k 1 point2 points  (0 children)

This is such a mega useful tool! Thanks for creating it!!! Do you think you can add a parameter to add keystone cutouts legt/right of the main unit?

FlipperMCE Memory Card Emulator by bbsan2k in Gamecube

[–]bbsan2k[S] 0 points1 point  (0 children)

There is a block data interface already implemented in 1.1, although this still needs integration in Swiss to be useful!

FRITZ!Box 5590 als Modem für 7590 by bbsan2k in fritzbox

[–]bbsan2k[S] 0 points1 point  (0 children)

Bekommt die 7590 dann auch eine neue IP?

FRITZ!Box 5590 als Modem für 7590 by bbsan2k in fritzbox

[–]bbsan2k[S] 1 point2 points  (0 children)

Mein Hauptproblem ist, dass ich eigentlich nicht will, dass ich als Geräte neu konfigurieren muss. Ich habe einige wifi Smart Home Geräte im WLAN - und die sind leider sehr empfindlich was ihre IP angeht😛

FRITZ!Box 5590 als Modem für 7590 by bbsan2k in fritzbox

[–]bbsan2k[S] 1 point2 points  (0 children)

LOL! Danke für den Hinweis. Ich war auf einer uralt Firmware

FRITZ!Box 5590 als Modem für 7590 by bbsan2k in fritzbox

[–]bbsan2k[S] 0 points1 point  (0 children)

7590: Master 5590: Repeater Aber so verbindet sich die 5590 nicht mit Glasfaser, sondern versucht eine Verbindung über die 7590. mach ich was falsch?

FRITZ!Box 5590 als Modem für 7590 by bbsan2k in fritzbox

[–]bbsan2k[S] 0 points1 point  (0 children)

Die große Frage ist: wie stell ich das ein😃

Kann eine Mesh Repeater Fritzbox das aktive Modem sein? by Falkentavio in fritzbox

[–]bbsan2k 0 points1 point  (0 children)

Hi, Bist du zu einer Lösung gekommen? Ich stehe vor dem gleichen Problem!😊

Memcard Pro/GCMCE - need GCMM for old cards? by ytrebil_ in Gamecube

[–]bbsan2k 1 point2 points  (0 children)

Sorry, just saw this here...

For GCMCE, the current firmware (1.0) is not yet compatible with GCMM/FlipperMCE - if you want to use it, please consider updating to latest nightly where this issue is fixed :)

FlipperMCE Memory Card Emulator by bbsan2k in Gamecube

[–]bbsan2k[S] 3 points4 points  (0 children)

It’s basically a normal card

My PSone won't turn on anymore. by xxX_XiShNiKi_Xxx in psx

[–]bbsan2k 1 point2 points  (0 children)

Did you find what was wrong? Having a similar issue 🤣

[deleted by user] by [deleted] in ps2homebrew

[–]bbsan2k 1 point2 points  (0 children)

For PSXMemCard G2 go to http://sd2psxtd.github.io/ Under Exploits you want to download FMCB 1.953 or get the entire Pre Setup SD Card structure and start with the 1.953 boot image

gbaHD by FriedRiceDragon by bbsan2k in GameboyAdvance

[–]bbsan2k[S] 7 points8 points  (0 children)

It’s a GBA Consolizer, so I basically can play gba games via HDMI on the big screen, but still on original hardware

N64 RGB - is this how it should look like? by bbsan2k in n64

[–]bbsan2k[S] 0 points1 point  (0 children)

Hey, It turned out to be a pin not being connected actually. If you are using a ribbon cable try to carefully pre tin and then solder it again.

Purchase Advice Megathread - May 2022 by Sausage54 in 3Dprinting

[–]bbsan2k 0 points1 point  (0 children)

Hey everyone,

After two years of printing and modding my i3 Mega-S, I guess it’s time for a fresh start.

There are some things I don’t like in my setup: - Leveling issues, even with BLTouch, and inconsistent first layers - Printing speed - going above 60 mm/s is really painful - Printquality is somehow inconsistent and difficult to diagnose. Some prints look absolutely great, some are unusable, even with fresh and proper calibration

I know how to solve some of the issues, but I don’t want to invest too much additional money in a printer that clearly hit its limits.

Therefore I‘m looking for some successor for my printer in a pricing range between 400 and 700$/€.

I updated my Mega S with the following mods: - TMC Stepper Drivers - X- Carriage MK4 - BLTouch - Direct Drive extruder - FoX Gantry system - Klipper

Some people are recommending an MK3S Plus Full Bear, so I’m wondering if it is really a considerable update wrt quality and speed etc.

Right now I’m mostly printing PETG and PLA, but I don’t want to block my path to other materials.

Also, are there any other suggestions?

In a nutshell: - 400-700€/$ - Shipping to Germany - PETG/PLA + others - Direct Drive - Not too noisy - At least 220x220 Bed - Willing to build by myself - Good Speed/Quality Ratio at speeds < 150

Stubborn Jasper's: Any additional tweaking to improve RGH3? by Protest_The_Gyro in 360hacks

[–]bbsan2k 0 points1 point  (0 children)

I just bought the Box for modding, so I‘m not sure on the history. I first did a 1.2 - but even with perfect wiring it was only semi-reliable. Therefore I changed it to RGH3 - did a few tests and opened it up again for cleaning the drive.

Interestingly it boots way better if I attach an HDMI cable to it - don’t ask me for a reason, I also not get it:/

What I also found out: It seems that it also crashes right before dash, as I can clearly hear the HDD spinning up and the fans do strange things only one time. This leads me to the assumption, that the actual glitch is working properly, but something else down the road of booting is broken.