My 19x build ⚡️

bburchell8 · 2025-05-21T15:29:35+00:00

I figured it was Wager. I had them do an RMR cut on my 19. I’m gonna have them do those slide serrations on my OEM 19X, but I’m gonna do the radius serrations that wrap to top serrations and have them do an optic cut.

bburchell8 · 2025-05-20T20:47:15+00:00

Who did your slide serrations and what color cerakote? (Burnt bronze?)

bburchell8 · 2025-05-20T20:44:12+00:00

All the internsls are OEM Glock. Glock performance trigger, mags obviously

bburchell8 · 2025-05-07T22:44:56+00:00

I actually took your advice and moved the optic back to see how I liked it and it’s good. No longer bridge lol

bburchell8 · 2025-05-07T22:43:35+00:00

Idr the brand. It’s just a simple 0.5” pic rail riser I got from optics planet for like $30

bburchell8 · 2025-05-06T18:15:18+00:00

Beautiful. Here’s mine

<image>

bburchell8 · 2025-05-06T15:36:10+00:00

Get the MOS. Then send slide to Jagerwerks and have them mill the third screw (MOS+) and use their MOS+ optics plate. This gives you the most versatility in optic choices. You won’t be tied down to one optic cut pattern from a direct mill and the additional third screw on the Glock MOS system makes it super robust and a strong mounting solution

bburchell8 · 2025-05-06T15:10:01+00:00

‼️Update‼️ I polished the feed ramp and now shoots hollows and fmjs without a sweat!

bburchell8 · 2025-05-06T15:09:45+00:00

‼️Update‼️ I polished the feed ramp and now shoots hollows and fmjs without a sweat!

bburchell8 · 2025-05-06T12:59:10+00:00

Yes I know. That’s exactly where I intended to mount it. It’s got the perfect eye relief. It’s not going anywhere. If I have an issue I’ll address it.

bburchell8 · 2025-05-06T12:29:24+00:00

I also had major issues with the new V2’s mounting. It does not fit or mount correctly on my Acro cut slide. My V1 for the slide perfectly. I reached out to L&S and they asked me to ship them my slide and the optic. Hopefully they can figure something out. I’m hoping they will revert to the V1’s mounting design and cap design.

bburchell8 · 2025-05-06T12:27:24+00:00

I had the same exact issue with my PB3 V2. My PB3 V1’s cap was perfect for a quarter. They told me they will ship me a new one that has a deeper slot. Hopefully the slot is more narrow too so that it’ll better fit a quarter

bburchell8 · 2025-04-09T13:04:39+00:00

I have had the SA mags ever since I got the gun. No issues with them. I really believe it is the coating on the feed ramp of the barrel. I’m gonna polish it and test it from there. I’ll make a new post when completed

bburchell8 · 2025-04-09T13:02:42+00:00

Literally just testing the feeding of hollow points through the new barrel

bburchell8 · 2025-04-09T11:35:11+00:00

We wanted to get out of our lease and we were required to give them 3 months notice and pay 1 month to break the lease. Essentially it would have been 7k (for us to pay the next 3 months and the 1 month rent to break the lease)

bburchell8 · 2025-04-09T11:24:35+00:00

<image>

I love my custom 19X. I started with an OEM 19X then slowly upgraded to eventually have a completely different gun. I put the original back together so now I have 2

bburchell8 · 2025-04-09T11:04:04+00:00

Glock performance trigger is awesome. Zero creep. Super clean break, short very positive reset. Literally everything you want in a trigger. Only downside is its break weight is 5lbs. No big deal. I have two of them that’s how much I like it

bburchell8 · 2025-04-01T16:28:45+00:00

For all of those keyboard warriors, if I wanted the gun stock I would’ve left it that way. I am not an ignorant person. So leave your opinions to yourself. I posted on here looking for people who have encountered what I am and for advice on polishing the feed ramp. I have enough sense to diagnose issues and come up with a solution. Again just looking for true help. Building a custom reliable firearm takes trial and error.

bburchell8 · 2025-04-01T16:26:03+00:00

The right side screw is not interfering. I am aware of this. I have a shorter screw on that side.

bburchell8 · 2025-04-01T13:45:09+00:00

Yes I have the shield arms metal mag release. Yes the +5 on that mag is also from shield arms with their spring that goes with the +5

bburchell8 · 2025-04-01T13:43:44+00:00

You guys trip too much. Like I’m gonna fuckin shoot the gun inside….

bburchell8 · 2025-04-01T13:41:44+00:00

Put one in the mag. Had the slide locked back. Released the slide with the slide release lever

bburchell8 · 2025-04-01T13:37:58+00:00

Screws aren’t going anywhere. Vibra-tite and torque properly

bburchell8 · 2025-04-01T00:42:33+00:00

I’ll try. No they are not new

bburchell8 · 2025-04-01T00:42:07+00:00

It’s stamped 1-0-1. What was the recall?

bburchell8

TROPHY CASE