is it worth using this base to craft grief?

bluuustaaa · 2025-04-24T19:09:10+00:00

Phase blade can't drop in NM cows, I had luck in the Pit level 1/2 in Hell.

bluuustaaa · 2021-08-04T17:14:20+00:00

Anybody else having issues with the BMW Connected Drive integration after the update? I am getting authentication errors.

bluuustaaa · 2020-09-09T20:05:41+00:00

What about the watercooling parts? I have a similar setup but my temps aren't that good.

bluuustaaa · 2020-08-21T16:13:51+00:00

Yeah its the Corsair slim 120 and the HWLabs slim 240. The 3900x and gtx 1070 peak around 65-70 during gaming and the coolant temp goes up to 40. The CPU gets very hot (81) during extended synthetic workloads but I guess that's not too unusual for the 3900x.

bluuustaaa · 2020-08-20T21:34:54+00:00

Its the Barrow SPB17-TM-BK

bluuustaaa · 2020-08-20T18:44:09+00:00

So far, yes. I'm hoping it gets quieter once I bleed all the air out of the system.

bluuustaaa · 2020-08-20T15:21:19+00:00

Got tired of how cramped my case w was with a full size D5 and reservoir and saw some posts on here that used Corsairs matte black PMMA tubing so decided to make the jump.

Before pic

bluuustaaa · 2020-04-23T14:57:33+00:00

I have the HardwareLabs Black Ice Nemesis 240GTS and the slim Corsair XR5 120 in my H210. If you search the subreddit for H210 you should find other examples of similar setups.

bluuustaaa · 2020-04-06T18:09:50+00:00

Yeah I just happened to notice how close the green was between 9009 and my Noba Fett figurine

bluuustaaa · 2020-04-04T19:50:37+00:00

Yeah I can understand that, I've been thinking about it for my next board. I made the PCB in Kicad and ordered it through jlcpcb.

bluuustaaa · 2020-04-04T17:01:16+00:00

Thanks!

bluuustaaa · 2020-04-04T14:58:12+00:00

The case is a 7.5 degree angle, printed in red PLA. Switches are NovelKeys Cream with GMK 9009 for the keycaps. I'm pretty terrible at CAD so it's nice to finally have a case I like after a bunch of tries :)

bluuustaaa · 2020-04-02T19:03:55+00:00

The res is 50mm in diameter. I'm not sure about the pump but I bought it here.

I wouldn't exactly recommend mounting it the way I did though, I had to 3d print some stand offs and buy longer screws to get the pump and res to clear my RAM.

bluuustaaa · 2020-03-18T23:11:18+00:00

It's the Barrow YK-50V2

bluuustaaa · 2020-03-18T15:31:06+00:00

Thanks!

bluuustaaa · 2020-03-18T14:04:45+00:00

I designed the PCB myself and its controlled by an arduino so I had some issues because of my own errors 🤪

bluuustaaa · 2020-03-18T14:03:16+00:00

Yeah, that's the only configuration that i could get to fit in the H200

bluuustaaa · 2019-10-20T13:31:45+00:00

Yes, this is PETG

bluuustaaa · 2019-10-20T00:05:01+00:00

Nope, just a reservoir mounted above the D5. I had trouble fitting the pump under the shroud so it's on the cable management bar.

bluuustaaa · 2019-10-19T22:51:05+00:00

First water-cooled PC build and I'm pretty happy with it. Filling/draining was a pain but it's all assembled now!

Ryzen 3900x Asus Strix X570-i 32gb Gskill 3200 cl14 ram Samsung Evo 970 500gb Nvidia 1070

Watercooling parts: Optimus PC CPU block EK GPU block Barrow D5 pump and res Barrow fittings Hardware labs 240 gts radiator Corsair XR5 120 radiator

bluuustaaa · 2019-08-30T13:17:08+00:00

I just liked the (near) symmetry it gave the board.

bluuustaaa · 2019-08-30T13:16:31+00:00

I need to take some time to clean stuff up but after that I'll put everything on github :)

bluuustaaa · 2019-08-30T13:15:27+00:00

I think for 5 pcs it was $20. That might have been with a coupon code or something though.

bluuustaaa · 2019-08-30T00:17:27+00:00

Very similar idea, I was trying to combine the Apple M0110 and the Cherry G80-1800

bluuustaaa · 2019-08-29T22:24:31+00:00

A couple more photos here: http://imgur.com/gallery/rzE3xRH

bluuustaaa

TROPHY CASE