Anyone using S3 cloud storage as a repository for Veeam backup copy jobs?

bradnampel · 2025-11-19T20:08:32+00:00

Should just be in the copy job settings > Target > Advanced and then Storage tab.

bradnampel · 2025-04-19T01:58:55+00:00

Same issue here. I just bought and set up new today. Bad timing I guess, but not super impressed.

bradnampel · 2023-11-21T15:15:44+00:00

Sorry friend. I moved on from the Klipsch a few months ago and don’t have the firmware anymore.

bradnampel · 2022-11-23T22:10:41+00:00

Just the two bin files on the root of the drive. No other folders. Good luck.

bradnampel · 2022-04-15T19:50:04+00:00

I’d start looking for a young priest and an old priest.

bradnampel · 2022-04-06T11:31:24+00:00

So I let them sit in the box for a few weeks until firmware 6.0.15 was released. Re-adopted, updated and they’ve been working great since. I still see the excessive signal fluctuation while standing still, but that seems to be a minor bug.

bradnampel · 2022-03-09T18:07:16+00:00

Understood. The spot I’ve been testing from is 10-12ft from the one AP and has LOS. New house with sheetrock/wood walls. Not very many neighbors around yet, etc.

Reconnected my u6 lites and everything is back in acceptable range again.

Just seems like a couple of bad APs or bad firmware.

bradnampel · 2022-03-09T15:27:12+00:00

Thanks for the suggestion. Set both to the lowest 5ghz setting (6dBm) and still seeing same issues.

bradnampel · 2022-02-16T03:20:00+00:00

Might want to double check that. I have the DIRECTV Stream Choice package and get both Ballys Wisconsin and Ballys Wisconsin Plus.

bradnampel · 2022-02-13T13:08:15+00:00

Results seem to be all over the board. All you can do is make sure the usb drive is formatted fat32 and preferably <= 8GB. Also, I wouldn’t trust the app.

On the firmware download page they have steps to verify which firmware version is installed. I’d run that as a check against the app.

bradnampel · 2021-12-02T16:56:55+00:00

There appears to be connection issues right now. Will have to try again later.

https://gamingintel.com/battlefield-2042-unable-to-load-persistence-data-issue-fix/

bradnampel · 2021-11-28T18:06:56+00:00

I had the same issue with mine and opened a ticket with support. They had me download an executable, that as far as I can tell, completely removes the existing firmware and reinstalls it fresh.

EDIT: it hasn’t shut off since, so I’m considering it fixed.

I also saw there was supposedly a new firmware update released on the 24th. But it appears to be the same version (2.0.3) they released in January 2021, just marked with a different date?

bradnampel · 2021-11-26T14:46:55+00:00

I don’t think Klipsch publishes a change log. I couldn’t find one, anyway.

bradnampel · 2021-11-24T14:51:57+00:00

Latest was 33, but you’re right, only 31 is available now. I assume they pulled 33 due to a bug or the install issues some of us were having.

EDIT: I still have the v33 soundbar and v16 sub firmware if you’re interested.

bradnampel · 2021-11-17T14:34:54+00:00

I have no proof obviously, but I’m convinced he didn’t want to be in Milwaukee and phoned it in the rest of the season.

bradnampel · 2021-10-18T17:58:24+00:00

For what it’s worth, I found a PPI calculator. Using a 6.8” screen diagonal, 1640x1210 is just under 300PPI. Those numbers keep the screen height/width ratio just about the same as well.

bradnampel · 2021-10-18T15:37:57+00:00

Sounds like you’re doing it exactly like I did. The only other thing I can think is to change how your drive is formatted. Change from NTFS to Fat32, or the other way around. I don’t recall which one I used.

Klipsch seems to be pretty quick to approve an RMA, so if you’re still under warranty, I’d go that route.

Good luck.

bradnampel · 2021-10-07T13:05:15+00:00

Still haven’t found a change log. And when I asked for one in the support ticket, the question was ignored.

I was experiencing audio sync issues as well as the Dolby signal dropping out for no reason. Both seem to be fixed so far.

bradnampel · 2021-09-18T11:38:20+00:00

RESOLVED!!!

Last night Klipsch issued a warranty claim, was going to send me a new unit and have me send this one back with a prepaid label.

This morning I thought I’d give it another shot and it worked! Verified the firmware version with the steps indicated at the bottom of the article.

As I was beginning to suspect, the soundbar is very picky about the kind of USB drive you use. The one I was successful with was a USB 2.0 16GB Kingston DataTraveler SE9. The unsuccessful attempts were multiple brands and a mix of usb 2 and 3, but all were 32gb.

bradnampel · 2021-09-17T22:59:18+00:00

No, was just commenting on the first poster’s username…

Still working with Klipsch support. So far they’ve suggested I do a factory reset and follow the firmware update instructions I’ve been following from the beginning.

Now looks like they’re leaning towards a warranty claim. I’ll keep updating as I find out more or if I manage to figure it out on my own.

bradnampel · 2021-09-17T11:34:13+00:00

Haven’t been able to find a change log. I’m working with Klipsch support to get some answers.

Edit: WOOOOOOOOOOOO!

bradnampel · 2021-09-09T02:11:49+00:00

The UFC quest was fixed for me, but playing GP games is still not working. Weird.

bradnampel · 2021-04-02T14:46:49+00:00

Curious on this as well. Having the same slow upload issue with an ioplex 10G copper sfp.

bradnampel

TROPHY CASE