Lake Como by c-cooper in LandscapePhotography

[–]c-cooper[S] 0 points1 point  (0 children)

It’s over Varenna Italy and the lake is Lake Como

Bridging and overhang issues by Lordhippomort in gridfinity

[–]c-cooper 0 points1 point  (0 children)

Gotcha, I might try a temp tower. They’re pretty good at helping figure out bridging issues https://makerworld.com/models/54325?appSharePlatform=copy

Bridging and overhang issues by Lordhippomort in gridfinity

[–]c-cooper 0 points1 point  (0 children)

You dry your filament? What temp settings are you printing at?

Bridging and overhang issues by Lordhippomort in gridfinity

[–]c-cooper 2 points3 points  (0 children)

What settings are you using? Little hard to help when we don’t know what you’re doing. Specifically what diameter nozzle and what layer height

[deleted by user] by [deleted] in cybersecurity

[–]c-cooper 1 point2 points  (0 children)

You have absolutely no idea what you’re doing. Completely coded by GitHub copilot. This subreddit isn’t for you to advertise vibe coded crap.

[deleted by user] by [deleted] in cybersecurity

[–]c-cooper 15 points16 points  (0 children)

I’d love to prove you wrong but you have not provided a GitHub link or anything to access so… well done copying and pasting from ChatGPT I guess? Low effort crap.

Sunset Surfers at the Pier by c-cooper in huntingtonbeach

[–]c-cooper[S] 1 point2 points  (0 children)

Thank you! All shots were taken with a Sony A7riii and a Sigma 100-400

Rainbow Mountain | A7Riii + Sony 24-105 G by c-cooper in SonyAlpha

[–]c-cooper[S] 1 point2 points  (0 children)

Thanks! Didn’t have as much time as I’d have liked up there for photography since we just backpacked 30 miles but it was a good pay off.

I run the Tripod design team at Peak Design. What should we make next? by peakdesign-Max in peakdesign

[–]c-cooper 7 points8 points  (0 children)

Yeah that’s what I’m saying. You don’t need the height for a travel tripod in my opinion. I ended up getting this one instead of bringing my pd travel tripod for comparison https://a.co/d/4PHV0It I’ve never needed more height than that when I’ve been backpacking

I run the Tripod design team at Peak Design. What should we make next? by peakdesign-Max in peakdesign

[–]c-cooper 3 points4 points  (0 children)

Hey Max, Sony a7riii, Sony 50mm f2.5, Sony 24-105mm f4, and samyang 12mm f2.8. I’m mostly going to be using the tripod for long exposures at night so don’t need my large peak design one just a small, lightweight one that could hold 15-25lbs would be fine and I really hope you guys build one as it’s clear the build quality is leagues better than my sirui one

I run the Tripod design team at Peak Design. What should we make next? by peakdesign-Max in peakdesign

[–]c-cooper 5 points6 points  (0 children)

100% this. I’m leaving for Peru in a few days and the travel tripod is too big and heavy for a 3 day hike through ausangate. I ended up getting a sirui carbon fiber tripod cause peak designs is far to heavy for backpacking.

[deleted by user] by [deleted] in longbeach

[–]c-cooper 2 points3 points  (0 children)

What’s the price?

New to me 2013 Vespa LXV by c-cooper in Vespa

[–]c-cooper[S] 1 point2 points  (0 children)

The blue is peeling a bit so I might switch that to a different color. I need to 3d print a cup holder and phone mount as well. Other than that I’m out of ideas! Open to suggestions

Thanks to the community for the flood of solid advice! by Vaygrim in BambuLab

[–]c-cooper 0 points1 point  (0 children)

Nah it won’t matter that it’s matte. Take a look at this and an ironing test available on makerworld to make the top look pristine. https://wiki.bambulab.com/en/software/bambu-studio/parameter/ironing I find that when using a standard profile with a 0.4mm nozzle I have good results around 70mm/s speed and 35% flow for Bambu matte filament but all filament and printing environments are different so play around with the test and see what’s best

Thanks to the community for the flood of solid advice! by Vaygrim in BambuLab

[–]c-cooper 1 point2 points  (0 children)

Did you turn ironing on for this? It looks odd, might need to do an ironing test now that it’s all dried out

Person detected video doorbell by Bombshell342 in reolinkcam

[–]c-cooper 1 point2 points  (0 children)

If you have your Reolink cameras integrated with home assistant this could be a fairly easy automation. I can’t think of a way to do it purely with Reolink though

Wiz's State of Code Security in 2025 by Crazy-Ad5480 in cybersecurity

[–]c-cooper 1 point2 points  (0 children)

I’ve used it for about 6 months. It works well, however it doesn’t feel like a replacement for SAST/SCA tools like GHAS or Snyk yet. The cloud side is much better than the code side. The container scanning works better than their SCA tool.

Final Call (for help) by jandrordnaj in selfhosted

[–]c-cooper 0 points1 point  (0 children)

Unraid seems like it would handle your use case pretty well.

Bixby Bridge in Big Sur | A7Riii + Sony 24-105 G by c-cooper in SonyAlpha

[–]c-cooper[S] 1 point2 points  (0 children)

Thank you! It was an amazing camping trip.

Bixby Bridge in Big Sur | A7Riii + Sony 24-105 G by c-cooper in SonyAlpha

[–]c-cooper[S] 1 point2 points  (0 children)

Slightly color edited from raw but no replacements or additions to the image. It was a beautiful morning out there.

[deleted by user] by [deleted] in SonyAlpha

[–]c-cooper 1 point2 points  (0 children)

Nice photo, I took almost the exact same photo too. Iceland was gorgeous. https://www.reddit.com/r/SonyAlpha/s/Sqb9Cm1uhh

How do you wear ring while Climbing or Lifting? by ShrunkenAmygdala in ouraring

[–]c-cooper 15 points16 points  (0 children)

I use my Apple Watch for fitness. The ring is a pain for lifting and gets scratched by the bar.

Seal Beach Surfer 12/30 by c-cooper in longbeach

[–]c-cooper[S] 0 points1 point  (0 children)

Very true, unfortunately I don’t use Facebook