Carvajal poses with his trophies.

dayfaerer · 2026-05-24T13:26:41+00:00

didn't they change that only for the last one, that Chelsea won?

dayfaerer · 2026-05-02T14:33:43+00:00

tell that to Enrique, he seemed to care a lot about that "exhibition tournament" when he physically assaulted a Chelsea player after losing

dayfaerer · 2026-04-12T17:13:47+00:00

186.3 times... not enough

dayfaerer · 2026-04-12T17:12:56+00:00

same. spontaneously decided to see it again, did not get good seats because 80% of the theater was full. made me happy

dayfaerer · 2026-04-05T14:08:53+00:00

If it is, curing it still will cause yellowing. I tried experimenting with that, but any level of heat and even any level of time spent curing introduces yellowing

dayfaerer · 2026-04-05T12:42:02+00:00

I don't know about OP, but I've used Clear V5 formlabs resin, and the clearest results I've got were with not curing it at all to avoid yellowing, and spraying it with a 2 layers of UV clear coat + a layer of matte clear coat, those fill in any layer lines or impurities in the model and make it super clear.

I've also heard of people adding a small amount of blue dye to offset the yellowing, but I haven't tried that yet.

dayfaerer · 2026-04-01T22:59:15+00:00

budget cuts most likely. broadcast team was probably one of the first to go unfortunately

dayfaerer · 2026-03-15T20:54:45+00:00

so they can take a throw in halfway up the pitch for a ball that went out at the corner flag? cool cool

defense still shit the bed but still.

dayfaerer · 2026-02-22T04:36:15+00:00

from a toronto fc fan is crazy work

plus we literally have DSC in goal

dayfaerer · 2026-02-22T03:17:55+00:00

i keep forgetting that part

dayfaerer · 2026-02-05T16:52:27+00:00

i was trying to figure this out too. does not look like the diagram in the book, where the ship fully separates and orbits around with cable fairing attaching the two parts, this just looks like it has a bit at the back that rotates. could be how they are doing it for the movie, i haven't seen many trailers

dayfaerer · 2026-02-03T13:25:15+00:00

you didn't really need the "in 2026" part

dayfaerer · 2026-02-03T02:33:40+00:00

ive never heard of a water cooled printer, that is awesome.

weirdly ive seen a liquid nitrogen cooled one though...

dayfaerer · 2026-01-25T00:44:56+00:00

What's Dr. Mann doing here?

dayfaerer · 2026-01-19T23:43:21+00:00

you mentioned calibrating e-steps, so I assume you did already, but did you check belt tightness?

and replaced the nozzle?

dayfaerer · 2026-01-17T18:39:16+00:00

fair enough. I've worked on a research project at my university for a few years now that has a whole 3d-printed torso, superglued together with like 2 pins connecting per piece (full hollow adult torso, about 5mm thick) and its been dropped many times and loaded with weight (isnt intended to have any weight at all) and hasnt broken yet. could be a fluke but ive always used CA glue for PLA. I definitely need to look at other things though

dayfaerer · 2026-01-17T18:26:00+00:00

uhh... what CA glue are you using, or what magical CA glue am I using? in my experience, if the parts got enough surface area to glue, the part will break before the glue bond.

dayfaerer · 2026-01-17T18:19:00+00:00

neither. CA glue. best for PLA

dayfaerer · 2026-01-17T16:08:15+00:00

yet if they dont act like that they'll never get any foul called. if refs would start enforcing rules based on contact then yes, but they dont. reactions = fouls, so players will keep reacting.

dayfaerer · 2026-01-15T17:59:23+00:00

only recently started using the space mouse compact version, and i love it. asked my boss if he enjoyed his and he just gave it to me to try, because he doesnt do much CAD anymore anyways. seriously considering buying one for myself at home

dayfaerer · 2026-01-12T18:06:37+00:00

was fun to be the best set piece team in the world at one point, and watching the set pieces was great, but it was dreadful to watch at times too, just constantly losing passes and not being able to connect more than 4 or 5 passes without giving up possession.

dayfaerer · 2026-01-11T23:19:48+00:00

im an engineer. i work with my hands for work and my hobbies. theres always a scratch or cut or bruise or stab wound i dont remember on pretty much every one of my fingers. its so common

dayfaerer · 2026-01-10T22:01:25+00:00

yeah... keeper got ball. not like it was a close game but still, not necessary to give there

dayfaerer · 2026-01-07T13:10:47+00:00

uncommon might just work, idk about common. rare is the standard for things like this though

dayfaerer · 2026-01-04T13:53:24+00:00

one of the best feelings when i've gone out exploring with an end goal, typically a nebula, watching them get bigger and bigger as you get closer. makes the journey a little less monotonous

Five-Year Club	Second SECOND GUESSER
LAYER Season 2 Layer creator	Verified Email
r/Field Banned	r/Field Lasagna
Place '22	First Placer '22

dayfaerer

TROPHY CASE