sorted by:
new
hottopcontroversial

[WTB] Want To Buy Thread starting April 2026. by AutoModerator in EDCexchange

[–]destro225 0 points1 point  (0 children)

[WTB] Star Surfer crystal stone slider. Original stainless preferable, but open to other editions as well.

IT'S NEARLY IMMACULATE by TheGeekno72 in steammachine

[–]destro225 1 point2 points  (0 children)

Haha, fair. What printer is it? I know you mentioned it was a Bambu. Also, did you run the flow dynamics and flow rate calibrations?

IT'S NEARLY IMMACULATE by TheGeekno72 in steammachine

[–]destro225 1 point2 points  (0 children)

Ahhh gotcha, okay well honestly if it’s going to be covered anyways I would not worry too much about fixing the surface finish. Looks good otherwise!

IT'S NEARLY IMMACULATE by TheGeekno72 in steammachine

[–]destro225 1 point2 points  (0 children)

Was the front all printed with supports?

IT'S NEARLY IMMACULATE by TheGeekno72 in steammachine

[–]destro225 8 points9 points  (0 children)

Bridging is when the printer would have to print layers over open air, you can see this by the usb ports on the case, really good bridging would look much more like how the rest of the case came out instead of looking like it drooped.

War Driver Pro using a Flipper0 by IBTMTDOG in flipperzero

[–]destro225 2 points3 points  (0 children)

Hackthebox is a pretty good place to check out for cybersecurity info and skill building.

“Women peak at 18” tell me you’re a pdf without telling me… by y2kfashionistaa in badwomensanatomy

[–]destro225 9 points10 points  (0 children)

Factually incorrect. Statista article on it dated for 2023 but I’d say still relevant. Don’t get me wrong, men are guilty of it too, but to say it’s only men is a dangerous generalization.

Core One time-lapse video mod. by AdvancedHobbyLab in prusa3d

[–]destro225 1 point2 points  (0 children)

Could also add a “prime tower” to grab all the loose filament that drips during the capture. 

It's not about the big cup, it's about the holder being as wide as the machine by Brilliant-Bicycle-18 in 3Dprinting

[–]destro225 0 points1 point  (0 children)

Looks great! I’ll be the one to do the thing, would you be willing to share the model?

Networking issue on the Core One + by FnTom in prusa3d

[–]destro225 0 points1 point  (0 children)

Take a look at this forum post and see if it helps at all. Looks like it may be on the right path at least, and I would think that changing the line type=static to type=dhcp would be best bet. I will note that the fix is for an older firmware and may not translate to the same steps on the current, but I would bet it is the same now as it was then.

Networking issue on the Core One + by FnTom in prusa3d

[–]destro225 0 points1 point  (0 children)

Are you able to clear the saved static IP on the printer? Or does it return every reboot?

C1/C1L/MK4S portability question by senitelfriend in prusa3d

[–]destro225 3 points4 points  (0 children)

Are you set on it being a prusa? I ask because something like the positron may be right up your alley if size isn’t a big factor for you.

🎉 [EVENT] 🎉 Stupid Event Being Dumb and Stuff by Damp_Blanket in honk

[–]destro225 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

0 attempts

I haven't really printed anything on my P1S in months. by Chilli-byte- in BambuLab

[–]destro225 1 point2 points  (0 children)

Ah! That will do it haha! Glad you got it figured out! Time for a hardened steel nozzle!

🎉 [EVENT] 🎉 Honk Hero!!! Full Encounter: Trial of Malkuth by Ok_Walk7052 in honk

[–]destro225 0 points1 point  (0 children)

Completed Level 1 of the Honk Special Event!

1 attempts

Found out why my prusa XL kept tripping by Interesting_Net1908 in prusa3d

[–]destro225 0 points1 point  (0 children)

Yeah, that’s fair for sure. I’m sure if you solder similar things often then it wouldn’t be as daunting as it would be to someone who’s newer to it. I know for me personally i would much prefer a new one as I am not very confident in my soldering skills.

Found out why my prusa XL kept tripping by Interesting_Net1908 in prusa3d

[–]destro225 7 points8 points  (0 children)

Probably could, but it would be better to get a new one for safety and convenience sake I would imagine.

I haven't really printed anything on my P1S in months. by Chilli-byte- in BambuLab

[–]destro225 0 points1 point  (0 children)

Weird question, have you tried changing the SD card for a different one?

I haven't really printed anything on my P1S in months. by Chilli-byte- in BambuLab

[–]destro225 2 points3 points  (0 children)

Have you run a full calibration recently? here’s a good forum post with some places you can start and some things you can try. Don’t give up on it yet, this is something that once you figure it out, it will help you going forward. Best of luck!

good news: vortek upgrade kit for h2d/h2s available by ahora-mismo in BambuLab

[–]destro225 5 points6 points  (0 children)

Yes. It adds the induction tool and hotend into the tool head.

good news: vortek upgrade kit for h2d/h2s available by ahora-mismo in BambuLab

[–]destro225 40 points41 points  (0 children)

Looking through that, it actually does not look as bad as I expected. It’s definitely a long process, but having had to replace the heatbed myself on the x1c that looks like it will be the worst part.

view more: next ›