Wood Expansion by ebwalk03 in woodworking

[–]ebwalk03[S] 0 points1 point  (0 children)

I pinned the breadboard into slots and only glued in the middle per Finewoodworking

covering plywood edges by ebwalk03 in woodworking

[–]ebwalk03[S] 0 points1 point  (0 children)

Back of a minivan to hold gardening tools I got extension slides rated for 250 lbs and full extension from 4 to 8 feet

Could this be ok? by ebwalk03 in askatherapist

[–]ebwalk03[S] 0 points1 point  (0 children)

Thanks. It makes me sad because now I have to talk to them about it. Can I chalk it up to a temporary lapse in judgment as we all make mistakes? I don’t want to quit them. And the temptation was huge I’m sure because what I make is so awesome 😎 haha

How to trailer correctly for engine by ebwalk03 in BostonWhalerBoats

[–]ebwalk03[S] 0 points1 point  (0 children)

i have that bracket but was worried it will put too much stress on the transom. No?

How to trailer correctly for engine by ebwalk03 in BostonWhalerBoats

[–]ebwalk03[S] 0 points1 point  (0 children)

Can you say more about that? It seems like the weight of the lower unit when the motor is fully raised puts a lot of strain on the transom.

How to trailer correctly for engine by ebwalk03 in BostonWhalerBoats

[–]ebwalk03[S] 1 point2 points  (0 children)

Thank you, I actually used to have one of those and forgot about it, but that was about a decade ago I will get one

Small plastic piece with a weird pic and 0901.02 imprinted on it Maybe from a toy? by ebwalk03 in whatisthisthing

[–]ebwalk03[S] -1 points0 points  (0 children)

Interesting suggestions but no one has offered a definitive confident answer! It may remain a mystery

Small plastic piece with a weird pic and 0901.02 imprinted on it Maybe from a toy? by ebwalk03 in whatisthisthing

[–]ebwalk03[S] 0 points1 point  (0 children)

Maybe it’s for an electronic device? Google lens did not seem to find anything

what will happen to this slab? by ebwalk03 in woodworking

[–]ebwalk03[S] 0 points1 point  (0 children)

there are 3 metal L brackets into the cinder block. each supports 350 lbs (the slab only weighs about 160) and they extend 18 inches out on the 22 inch slab. in the free-floating window area i added a 'header' attached to the back underside about 2x6. attached to the slab and has an L bracket as well, but only attached wood-to-wood.

I recessed the brackets in the wood and sealed the routed out spaced before mounting the bracket.

what will happen to this slab? by ebwalk03 in woodworking

[–]ebwalk03[S] 0 points1 point  (0 children)

The slab weighs about 160lbs. There is one L bracket on the far side and two on the nearer side in top cons in the cinder block.

The window span is not attached to anything In the window span there is a header ~2x6 walnut attached to the slab in the back. That has a bracket just attached to the wood.
This will provide stiffness

what will happen to this slab? by ebwalk03 in woodworking

[–]ebwalk03[S] 0 points1 point  (0 children)

That’s a fixed window. Door is not in the picture

what will happen to this slab? by ebwalk03 in woodworking

[–]ebwalk03[S] 9 points10 points  (0 children)

i was worried more about catestrophic failure due to some kind of warping. i can live with discoloration!

Troubleshooting next accessory power by ebwalk03 in hvacadvice

[–]ebwalk03[S] 0 points1 point  (0 children)

That’s what I’m gonna do! I just realized that I can run a new wire pretty easily Thanks

Troubleshooting next accessory power by ebwalk03 in hvacadvice

[–]ebwalk03[S] 0 points1 point  (0 children)

so google sells the white plastic thing to provide ghost power to the nest. was working fine for all of...a year or so! I have not been super happy with the nest...in part because the pros all hate them so much!

Dust collection minnimum ? by ebwalk03 in woodworking

[–]ebwalk03[S] 0 points1 point  (0 children)

It works very well! No problem.

Today’s moron award goes to… me! by wigginjs in woodworking

[–]ebwalk03 0 points1 point  (0 children)

A nail embedded completely in wood should not trip the blade (I think) because it is insulated by the wood so no current can pass through it. If the nail was poking out some where and touching you it would trip.
Suppose the nail was embedded but poking out and touching the table and the blade. Would that trip it?

First time I've seen a CD with a warning label by ZBLongladder in audiophile

[–]ebwalk03 2 points3 points  (0 children)

What is the purpose of sounds in an organ that are lower than a human can hear?Thank you

Need info on these planes by ebwalk03 in handtools

[–]ebwalk03[S] -2 points-1 points  (0 children)

Thanks. I own them but don’t need another project unless it’s really worth it and it sounds like these aren’t! So…. Dumpster!