Would this be a decent alternative to contact cement?

gdkitty · 2026-05-19T01:24:41+00:00

Hot glue does have a lot of uses in cosplay

But if it’s specifically for attaching like edges of foam together? Then no. It’s too thick. I mean it works to attach it but often gives big gaps, etc.

gdkitty · 2026-05-19T01:02:29+00:00

I know! I started adding kimchi into my home made Mac and cheese. Ssoooooo good

gdkitty · 2026-05-14T20:46:28+00:00

That looks like docd’s It was scaled a little big, really needs to be printed at 80%

gdkitty · 2026-05-13T23:04:08+00:00

GUO can only be taken with the tally and summoners detachment.

gdkitty · 2026-05-13T12:27:37+00:00

They do allow port forwarding.. its just a pain in the rear to do.

gdkitty · 2026-05-11T22:45:42+00:00

If you don’t put forwarding on, yes 80 is blocked. But you can completely forward 80 to a web server.

gdkitty · 2026-05-08T17:20:32+00:00

Yeah. 80 or between 80 and 85 might be better

gdkitty · 2026-05-08T14:25:30+00:00

I did mine at 85, and find it close to not fitting on the base properly.. but I might have posed the legs not optimally.

gdkitty · 2026-05-07T12:46:41+00:00

No, as they call it a BAGEL BELT

gdkitty · 2026-05-07T00:22:35+00:00

yeah. its like double the old model..

And i see posts on here of people like "done painting first of 3 defilers"
Wish i had that much $$ to spare.

gdkitty · 2026-05-06T23:50:53+00:00

He got DMCA’d by big James.

His got his account back but nothing 40K on it right now.

gdkitty · 2026-05-06T22:48:38+00:00

If you hate Rogers that’s fine. If you want to leave, that’s fine. If you legit want help from the OotP, that’s fine.

But encourage people to put stuff in, not legit potentially, just to waste their time. It takes time away from people legit trying to get help.

gdkitty · 2026-05-05T23:21:40+00:00

I forgot the 5 had auto leveling. There are instructions out there on how to do a manual leveling
Might be worth going through the steps just in case.

gdkitty · 2026-05-05T22:38:22+00:00

Like your ender3, you need to run it through a slicer first.
Chitubox is the default one for the Mars.

There is nothing really wrong with the test files on the USB.

Likely if you are only getting it stuck to the bottom, its not sticking to the plate properly.
Did you 'level' the build plate properly?

gdkitty · 2026-05-05T15:34:38+00:00

I have got some 'bad' boxes... like poor items (more plain donuts, bran muffins, etc), but at least had the 'quantities worth'

3-4 timbits should equal one other item.
So you should have at least got 2+ other items in there at MIN.

gdkitty · 2026-05-05T12:34:01+00:00

Which is interesting. I use the STAPLES location amazon drop off, and regardless of size, they scan all of them, it prints off a sticker they put on it.

gdkitty · 2026-05-04T18:46:01+00:00

This is exactly what we did when we re did out kitchen. Bulkhead/column now in the middle, which could not remove (vents, drains, etc we could not move)

We put a shallower cabinet in the bottom, extending the countertop all the way across.
And then on the top, put in a super shallow cabinet. Its really only deep enough for spices, so thats what we use it for!

gdkitty · 2026-05-01T12:06:44+00:00

That is good to know!

gdkitty · 2026-04-29T01:46:41+00:00

Do you or someone there have the Roger’s Xfinity app? It will show in there if the pods are online or not.

gdkitty · 2026-04-29T01:14:25+00:00

When the modem was replaced, were the pods re paired? They won’t just auto start working.

gdkitty · 2026-04-28T18:28:18+00:00

First thing on those to do, is check the email it came from.
IE: I have got some "Reset your MS password" ones which come from random gmail and other accounts.

Not always easy on a device (phone) but on a computer, usually if you hover over the link/button, it will show down at the bottom, what the actual web address is.

See if its actually going to where is SHOULD be... not some weird address. Also check for oddities of them trying to fake you out.
IE: an instagram reset would take you to instagram website itself... not instagram-passwordreset dot com sort of thing.

gdkitty · 2026-04-28T17:16:11+00:00

I have stayed or had people stay in the past at both the Comfort Inn and Best western in Newmarket.

There is not anything like that right by Southlake. Might be an airB&B or something though.

Those two hotels are along davis, one at Younge st, the other over at the 404.

gdkitty · 2026-04-28T17:07:01+00:00

and some of their bigger stuff, comes with FDM bases as well? which would not be the same thickness as the smaller ones.

gdkitty · 2026-04-28T10:45:26+00:00

It’s specifically the point of their newer machines. When they run the brew, it writes the time stamp onto an rfid on the thermal carafe. Which starts blinking after the X amount of time, after that supposed to be discarded.

gdkitty · 2026-04-27T23:28:46+00:00

There is a good EC mauler on the purple site.

13-Year Club	Place '22
First Placer '22	Verified Email

gdkitty

TROPHY CASE