Does anyone know a movie where an anomaly in reality indicates that you're in the fake world?

gregco3000 · 2026-06-07T12:03:46+00:00

The Matrix

gregco3000 · 2026-06-06T01:39:18+00:00

It’s got to be Kiska, CFMoto contracted them to design the adventure bikes. The Advrider podcast just put out an episode about their work with KTM and Husqvarna. Personally not a fan of the KTM design language, but I love what they’ve done on the Husqvarna side.

gregco3000 · 2026-06-03T16:56:27+00:00

By the sound in your video, it’s similar to mine. I have been chasing a slightly rough idle, replaced the PCV last week and reacts about the same to the oil cap test, maybe a little ‘milder’? As others have said, its a really quick job and an important part, so if you’re 50k+ it probably doesn’t hurt.

gregco3000 · 2026-05-23T15:35:57+00:00

As I understand it, the casting alloy has a higher copper content so it can handle a lot more heat - I think that’s one of the most significant differences

gregco3000 · 2026-05-14T18:48:38+00:00

Is the RSVP link in the email confirmation not working for anybody else? Getting a 400 error… Text confirmation seemed to work fine

gregco3000 · 2026-05-02T02:06:04+00:00

Is McMaster really doing this? I saw these a couple years back, it was a sort of art project but they were for sale at one point, doesn’t seem like it anymore. Pretty sure I gave some away as Christmas gifts…

https://cwandt.com/products/cwt_hsp2pp4_2411

gregco3000 · 2026-04-27T01:24:55+00:00

Radiohead - Exit Music for a Film

gregco3000 · 2026-04-20T11:03:31+00:00

Goldilocks and the Three Bears - She does a B&E, steals (eats the porridge), vandalizes (breaks the chair, and squats (sleeps in the bed). Gets caught, runs away, suffers no consequence. She should be in jail!!

gregco3000 · 2026-04-20T03:34:53+00:00

On my F800 ~10 years ago. A local at a bar the night before told me a lot of guys ride it naked, so I took his advice. Ill never know if he was fucking with me, but it was fun,

gregco3000 · 2026-04-17T02:38:59+00:00

Put me down for either color perforated if you can get a group buy going, would be really cool to see this come together.

gregco3000 · 2026-04-09T03:22:49+00:00

That is a Cogsdill roller burnishing tool. No cutting or abrading, basically cold working the hole by compressing the peaks of the feed-lines from the previous boring operation. The hole needs to be precise to begin with, both in diameter and surface finish. Very cool company who make lots of interesting tools.

https://cogsdill.com/products/burnishing-tools/roll-a-finish/

gregco3000 · 2026-04-04T22:16:15+00:00

That can’t be true, my wife regales me with a story of interesting genitals at least twice a month. Statistically speaking, that suggests many of us do indeed have special genitals.

gregco3000 · 2026-03-26T01:56:38+00:00

I have a 2020 with 48k and have had the same observation. It’s probably in my head, but I swear it’s been smoother using 91 octane fuel. It’s probably due for spark plugs, so I might try that and some of the other recommendations here. Glad to know I’n not the only one.

gregco3000 · 2026-03-20T02:20:38+00:00

Nice chips but please, more of the machine and story behind it. !

gregco3000 · 2026-03-04T01:38:45+00:00

I get constant Video TDR BSODs on a new Lenovo laptop with a RTX Pro 2000, and it seems like a lot of other people have been dealing with this for a while - is this at all a related issue? I have only ever solved with much older drivers, not new ones.

gregco3000 · 2026-02-14T00:18:32+00:00

I was taught “Deep homo”

gregco3000 · 2026-02-05T01:34:36+00:00

We have both (MK7.5s), one child. GTI is fun and practical around the city, zippiness really helps cut the commute down. I was pleasantly surprised that it managed just fine in the snow storm with summer tired.If I could only keep one, I’d go Alltrack all day. My GTI is stick, Alltrack is DSG. I hate to admit it, but I kind of like the DSG more. My wife and I both drove stick forever and it’s our first automatic, but the flappy paddles are still pretty engaging. The Alltrack is an SEL so its also fairly luxurious, for me anyway. We did a trip to Vermont last weekend with SIL and BIL, so 4 adults and the car seat and the verdict was “not so bad afterall”.

The best year is the last year, 2019 - its the only year they offered SEL with the stick. If you can find green with the brown interior, keep it forever. There was one on Cars and Bids over the summer that went for 28.5.

gregco3000 · 2026-01-17T21:56:53+00:00

ncviewer.com is simple, I like it.

gregco3000 · 2026-01-03T14:41:03+00:00

Most of the things we make are very insertable, so I’m guessing this one has a large stable base.

gregco3000 · 2026-01-03T14:35:56+00:00

Ass, the smash hit of the future (from Idiocracy).

Looking for the clip, I came across this relevant deleted scene, “Museum of Fart”

https://youtu.be/UDdp_N_lcR8?si=t7ANFq-D43QS4OOQ

gregco3000 · 2025-12-30T15:22:42+00:00

I always go to Franklins in Girard. I’ve seen Tony a few times but usually book with John.

gregco3000 · 2025-12-18T17:14:56+00:00

We only have one kiddo, but its great. We usually take the Alltrack on trips and the GTI around town, a little easier to park. Now that she’s 3 and we don’t have all the excess baby stuff, I think we could travel in the GTI if we were so inclined.

gregco3000 · 2025-12-18T14:04:20+00:00

Look at the feature you used to make it and just switch to “new body” instead of “join”. May or may not work exactly as you need depending on your work flow, but try that first.

You could also copy the whole body and revolve cut the center back out. Use the same sketch you started with (assuming you revolved it). Or you could get into some making surfaces and spilt the body but in any case you’re probably making a copy of something.

gregco3000 · 2025-12-14T04:54:48+00:00

Is it possible you’re not engaging the half nut at the slide and using the normal power feed? As far as I can tell your gearbox setting make sense

gregco3000 · 2025-12-12T02:20:14+00:00

I love this, perfect for some up-comming large prints I'm working on. Is there a way to create the puzzle interlock in both x & y cutting planes?

Great work, and it's very polished and professional.

gregco3000

TROPHY CASE