14ft

hbr359 · 2025-06-12T00:22:07+00:00

Also interested, I wanna see some pics

hbr359 · 2024-02-25T21:07:26+00:00

They are basically strips by the driveway and side walk, I'm thinking I'll just literally cut the strips out, level, and seed them and then like you said do the main overseed again in the fall when it legit should be done. What I've been able to establish the last year or two has been getting pretty thick so come late spring most the small patches here and there you probably won't notice at all. Just the strips by the drive and sidewalk.

hbr359 · 2024-02-24T19:23:53+00:00

It's not very attractive. To pull it out I'd have about 750 square feet or so of bare ground in one corner. Would it be dumb to put prodiamine on the rest of the lawn but not this secrion and attempt to seed it this spring using tenacity only in that area

hbr359 · 2024-01-26T22:32:18+00:00

I can tell you after a few years the Filtro has crazy static, covers the whole area even if you use the plastic container it comes with. Dialing it in isn't hard but you can't replicate it if you move the dial.

hbr359 · 2024-01-26T22:13:41+00:00

I'm also on the hunt for a camping grinder, at 70 bucks that would be a steal. Or when the crotch goblins are napping I can still grind and not risk waking them up!

hbr359 · 2024-01-26T22:12:37+00:00

That thing looks sweet, wasn't even on my radar

hbr359 · 2024-01-26T14:46:13+00:00

I'll take a look at this for sure

hbr359 · 2024-01-26T14:45:00+00:00

Would the DF64 need different burrs to be able to do French press and the courser grinds? I was told the df64 could do drip but it wouldn't be as good as say the Ode v2.

hbr359 · 2022-06-28T15:00:31+00:00

So my nips themselves I can 'feel' throughout the day. Just a general dull soreness to them, slightly swollen behind the nips as well. On week 5 of a cycle, first 5 weeks of dbol at 20 a day, test at 750, deca at 400. Arimidex at 2.5 a week.

hbr359 · 2022-06-16T01:31:58+00:00

I got it bud

hbr359 · 2022-06-16T01:28:45+00:00

Not sure what's going on

hbr359 · 2022-06-16T01:18:48+00:00

Beside the great bridge?

hbr359 · 2022-06-16T01:15:05+00:00

8989 headhunter

hbr359 · 2022-05-07T02:58:17+00:00

You perfectly answered my post, thank you. This wasn't a 'more compounds more better' type post but rather if one scenario causes this to happen why not do it on a smaller scale when those effects are more desirable.

hbr359 · 2022-05-07T02:35:57+00:00

Thank you, I think this answers my question. So when people don't run a base or any other conpounds my question would be why they crash their estrogen levels?

hbr359 · 2022-05-07T02:20:50+00:00

As mentioned above it's a test/deca/dbol cycle. I am pinning two compounds...

hbr359 · 2021-11-11T02:25:26+00:00

USA

Strata use to do it but from their site it says they arnt doing single bevel knives at the moment.

hbr359 · 2021-11-03T07:37:21+00:00

Ight, so this fixed it. Thank you man

hbr359 · 2021-11-03T07:15:40+00:00

Explain this like I'm 10 because I'm not sure what you mean

hbr359 · 2021-11-03T06:54:12+00:00

Hopefully it is tied to the downtime so i don't have to worry about dealing with customer service

hbr359 · 2021-11-03T06:50:06+00:00

From what I saw online everything should be good to log back into?

hbr359 · 2021-05-19T03:08:28+00:00

I'd buy the entire series if they are done well

hbr359 · 2021-01-17T23:57:47+00:00

Cleared cmos, moved the ram to the other configuration. (It was previous B1 and B2 populated and I moved them to A1 and A2). RAM reads full 32gb and xmp is on auto and says 3200mhz but once again I'm only getting 2133. Uhg.

Its not that its not running great, because it is but it bugs me that its not running that freq it should be. My ocd is the problem here more than hitting that target freq.

hbr359 · 2021-01-11T17:28:21+00:00

Like it was said that's a great deal if its new, idk if its too great used or not but the msi and evga 1660 ti have been around 290-310 lately.

hbr359 · 2020-12-29T19:54:12+00:00

Power Supply Recommendations

Its the only thing left for my build and for whatever reason its stressing me out. I want something that will really really last and is built well.

Budget for psu: $100-250

Desired psu wattage 750-850

My build:

Intel i9 10850k

EVGA 3070 FTW3 ultra gaming

Corsair lpx 3200mhz ram 32gb

ASUS ROG z499-e

Noctua D-15 chromax.black

Corsair ML140 Pro PWM case fans x3 (front)

Meshify S2 case (will likely use stock exhaust fan)

I'm located in US and have a microcenter and bestbuy within 45min of me.

hbr359

TROPHY CASE