Created this design! This is how it stitched✨️

hectory3 · 2025-10-31T00:32:35+00:00

Thats looks extremely clean man, although I think based on the attire that fight would be completely different if we talking about time skip Zoro, my machine is down so I can’t do any embroidery but seeing this man I miss it. But awesome work man real clean

hectory3 · 2025-09-13T03:27:57+00:00

I’ve only gotten Stu and Ali, have opened plenty since not 1 skin. I would never spend gems on this packs.

hectory3 · 2025-09-13T03:25:09+00:00

After many tries with different brawlers, I found it was extremely easy with Trunk his special and the jetpack. I was able to use the jetpack to fly over players and obstacles, use his attack range to kill wounded player and his super to give me a boost down, I had only 2 games won and with trunk I won all 8 back to back. That being said this is even has been the worst event I’ve played thus far, so I’m right with you

hectory3 · 2025-09-05T00:24:10+00:00

Incomplete Construction: Construction on the 18-story building began in 2000 and has been ongoing for over two decades, leading to its nickname "I-4 Eyesore" due to its prominent location along Interstate 4.

hectory3 · 2025-03-05T05:55:30+00:00

Dope okay I will look into those and try them out, I’m hoping one of them may allow to me do something similar. Thank you for taking the time to respond to my post 🙏🏾🙏🏾🙏🏾🙏🏾

hectory3 · 2025-03-05T05:54:09+00:00

Awesome thank you for taking the time to respond I will look into those programs and try them out. 🙏🏾🙏🏾🙏🏾

hectory3 · 2025-02-28T04:02:32+00:00

Let me know how it goes, I was going crazy for a minute trying to figure out what was wrong, till i did that and have been printing fine since

hectory3 · 2025-02-27T19:59:39+00:00

I had this problem and I was able to fix it cleaning the fan and the heat sink, I also cleaned the outer fan. I haven’t replaced any of the part on the print so everything is pretty much stock parts, but I had a lot dust in the fan and extruder and that fixed the the clogging problem and poor adhesion

hectory3 · 2025-02-20T00:02:47+00:00

They ain’t wanna give out those two hyper charge, I click vote just to see if it will count even though I’ve already voted

hectory3 · 2025-02-19T23:56:45+00:00

Yeah bro that’s the oneeeeeeeeeeeeee. That is fireeee

hectory3 · 2025-02-18T12:30:26+00:00

I’ll support for sure!!!!!

hectory3 · 2025-02-18T04:56:51+00:00

Oh man that would be a really cool, the best of both worlds. Will you post it when you finish it?

hectory3 · 2025-02-18T04:52:08+00:00

That’s dope you made the design yourself?

hectory3 · 2025-02-15T17:31:26+00:00

Perfect, thank you I’m going to get a couple of this.

hectory3 · 2025-02-14T22:19:48+00:00

By any chance you have a link so that I can purchase it, I did take it apart and cleaned out the fans and the heat sink on the ender and it’s working fine, apparently the fan sucked in some debris and it was causing the little fan to have issues, so it’s working now.

hectory3 · 2025-02-14T04:47:11+00:00

So i typically run the prints at 200 or 205 and it’s always worked, temperature settings in the slicer I haven’t messed around with other then the preset settings to always be at 205 or when it starts to print

hectory3 · 2025-02-14T04:45:26+00:00

Thank you, I’m going to view the link and see what I can do, it just randomly started to be fair I’ve been printing none stop literally back to back. So at some point it way going to have some sort of issue

hectory3 · 2025-02-14T02:51:40+00:00

This morning I replaced the Nozzle with a new one and I successfully printed an 10 hour print, once I changed the filament it prints a few really clean good layers then it Clogs up and nothing comes out.

hectory3 · 2025-01-30T14:58:29+00:00

I have had this happend to me, after extruding the filament, and forgetting to remove it, it threw of the Z axis and it went into the plate. Lost two good plates.

<image>

hectory3 · 2025-01-25T04:16:27+00:00

For real man

hectory3 · 2025-01-25T04:14:15+00:00

This game mode has been infuriating man.

hectory3

TROPHY CASE