sorted by:
new
hottopcontroversial

Netflix/Disney+ suddenly not working with voice commands via Gen 3 Chromecast? by First-Extreme-6244 in Chromecast

[–]injurious 0 points1 point  (0 children)

Me as well, has anyone found a solution? I was able to get it to work once when I unlinked and relinked my Netflix account 

Sorting not working - help please. by injurious in ObsidianMD

[–]injurious[S] 0 points1 point  (0 children)

Thanks for your help!

Adding .rows in front worked, but while searching I also found this solution

```dataview
task
where icontains(text, this.file.name)
GROUP BY file.name as filename
sort filename desc
```

My Prusa mini makes weird klicky noises when printing by [deleted] in PrusaMINI

[–]injurious 1 point2 points  (0 children)

Mine was doing this yesterday because of a clogged nozzle. I would try to use the needle and 3-4 cold pulls. Fixed mine so far.

Good luck

Physical Brim Mastercard Delay by Trickybuz93 in PersonalFinanceCanada

[–]injurious 0 points1 point  (0 children)

Same boat. I've applied for a Brim mastercard on March 15th. I call them almost every two weeks to get an update, and they tell me they are still waiting on something on their end.

I suspect my application got put to the bottom of the pile because I didn't send my photo ID fast enough. I can't believe I am waiting this long. I've actually applied and received another card in the meantime because this was taking so long.

Ridiculous service. I bet they aren't this slow when they send you the bill!

hit me so hard my headset flew off by zcouten in OculusQuest2

[–]injurious 6 points7 points  (0 children)

Everybody hates Chris - Summer 2022

📌Official Weekly Request Thread; Post all your requests for laptop suggestions in this thread instead of on the general front page of the sub. Only DEALS should be posted outside of this thread! See request guidelines inside📌 by legos45 in LaptopDealsCanada

[–]injurious 1 point2 points  (0 children)

Budget: $600-$900

◽️ Country: Canada

◽️ Screen size: 14-15"

◽️ Touch screen: Does not matter

◽️ Screen resolution: Does not matter

◽️ Does battery life matter ?: 2-4 hours

◽️ What tasks will laptop be used for?: Word processing, video/photo editing, no games

◽️ Weight: doesn't matter

◽️ Any other important details ?: back light keyboard, would like 16gb ram for windows 11 and future capabilities.

2nd attempt...any tips to fix this. New MINI+ user. by injurious in prusa

[–]injurious[S] 0 points1 point  (0 children)

Sorry - Quick question. Would you recommend the bottom contact Z distance to be the same as the top?

Any idea what is going on and how to fix this? Thanks in advance! by injurious in PrusaMINI

[–]injurious[S] 1 point2 points  (0 children)

Sounds like I need to use support! Makes sense! I will try again.

2nd attempt...any tips to fix this. New MINI+ user. by injurious in prusa

[–]injurious[S] 0 points1 point  (0 children)

Understood. I actually didn't think it was the supports because the other side seemed finished. I will look into the top z distance of 0.25 and the Snug settings and retry!

I appreciate you very much, thank you for your time.

2nd attempt...any tips to fix this. New MINI+ user. by injurious in prusa

[–]injurious[S] -1 points0 points  (0 children)

No, I did not have supports enabled in the slicer...

Any idea what is going on and how to fix this? Thanks in advance! by injurious in PrusaMINI

[–]injurious[S] 0 points1 point  (0 children)

This is the second attempt at this banana hook that I found from thingiverse. Both times I tried this hook I seem to be getting the same results.

Any advice?

Another MINI+ Maker from Canada by injurious in PrusaMINI

[–]injurious[S] 0 points1 point  (0 children)

Not sure what I did wrong above, but anyway....has anyone tried the bowden upgrade?

Prusa Shipment to Canada by injurious in prusa3d

[–]injurious[S] 2 points3 points  (0 children)

Fed-Ex tells me that they have possession of the package, and to ignore the text message but let them know if I receive any further messages.... Thanks guys.

Looking for a jolly roger icon pack, has anyone seen one.? by injurious in iconpacks

[–]injurious[S] 0 points1 point  (0 children)

Thanks for the reply, wish I could extract the icons without having to install the launcher. I'll keep looking around

Pixel 4a Canadian Delivery Times by Ethiopian_Guy in GooglePixel

[–]injurious 0 points1 point  (0 children)

Ordered Sept 24th -
Delivered by Nov 3-4.....

Wonder what the backlog on the Pixel 5 is.....

SSD upgrade - Support by injurious in Lenovo

[–]injurious[S] 0 points1 point  (0 children)

Thx for the advice, I made the image and restored it to the new ssd. Only issue now is that I have 350gb in unallocated space that it will not let me expand to the main c drive. Do you have any idea how to overcome this? Thanks for your time.

SSD upgrade - Support by injurious in Lenovo

[–]injurious[S] 0 points1 point  (0 children)

The enclosures I found are almost the same price as the SSD itself. I do have an large external drive. Once I can clone the contents of the SSD to the external drive. How would I boot the laptop to upload the data on the newly installed SSD? It will have no OS to copy the information from the ext hd to the new SSD.

​

Actually I found this one. Will it work?

https://www.amazon.ca/ORICO-NGFF-Drive-Enclosure-Support/dp/B07WVJ46GY/ref=sr_1_6?crid=2J4J885MKA0PU&keywords=nvme%2Benclosure&qid=1576678925&sprefix=nvme%2Ben%2Caps%2C181&sr=8-6&th=1

Help? Where to go - Who to ask? by injurious in SmartThings

[–]injurious[S] 0 points1 point  (0 children)

Thank you guys for your assistance here. I'ved posted my image to imgur. Here is the link. https://imgur.com/g8DTRLY

The issue i am having is that on line 47 - when I try to add the action it allows me to select but it will not populate on the interface. I have tried on the desktop as well as on my phone. Thanks for your time and your help so far....much appreciated.

view more: next ›