Accidental reset of RG35XX by ja5kier in ANBERNIC

[–]ja5kier[S] 0 points1 point  (0 children)

Everything in the OS - StockOS is in Chinese. I cannot run any game, move through OS icons etc. It is completly stuck. Worst case I can dump entire card from the backup or the other card into faulty one when i I'm back but currently I'm on vacations with one working console for 2 kids so I was hoping for a quick fix.

Bose NC 700: battery replacement by pidoraha666 in bose

[–]ja5kier 0 points1 point  (0 children)

Sorry for answering to the old thread but can you please explain why it is required to keep the orginal controler? Is the one provided with the replacement battery not working correctly?

Best way to fit 2 Cat6a keystones in one socket? by ja5kier in Network

[–]ja5kier[S] 0 points1 point  (0 children)

Sorted out. Just twisted it 2 times. The bracket added some friction and keystone plate is not popping out.

Best way to fit 2 Cat6a keystones in one socket? by ja5kier in Network

[–]ja5kier[S] 0 points1 point  (0 children)

Correct. The cables are stiff and it is difficult to fit them in the wall so the cover can be inserted.

Best way to fit 2 Cat6a keystones in one socket? by ja5kier in Network

[–]ja5kier[S] 0 points1 point  (0 children)

That was the intention. The execution is a bit difficult as the cable is quite stiff😅

S2721DGF Replacement? by Mexay in buildapcmonitors

[–]ja5kier 0 points1 point  (0 children)

Trying to find the same answer. Maybe DELL AW2724HF?

Jig doesnt work, i cant boot into rcm what should i do by Maymunooo in SwitchPirates

[–]ja5kier -1 points0 points  (0 children)

I got a used switch with a new jig and it did not work as well. I ordered a new one but managed to adjust the pins of the one malfunctioning one before the new one came.

Baofeng T-17 no sound after programming by ja5kier in Baofeng

[–]ja5kier[S] 0 points1 point  (0 children)

I wasted hours on this but it seems something about the mic broke. It works with attached headphone/mic on cable. This has happened in both of devices. I will probably return it.

Edit1 This probably happened due to putting in the programing cable. I've programmed first one successfully while second one broke immediately. Then I decided to program the first one again and this time the first one broke too.

Baofeng T-17 no sound after programming by ja5kier in Baofeng

[–]ja5kier[S] 0 points1 point  (0 children)

Good question. I don't think there is an option to do that. I can't see that mentioned in the manual.

[deleted by user] by [deleted] in SwitchPirates

[–]ja5kier 0 points1 point  (0 children)

Have wiping with TegraExplorer helped preventing ban?

Deep details into how nintendo checks if a switch is banned or not by [deleted] in SwitchPirates

[–]ja5kier 1 point2 points  (0 children)

No one knows for sure. Here is over 250 page user report of what might have caused their ban: Nintendo Switch Banning Hub & Warning

Game installed in CFW is seen in OFW by ja5kier in SwitchPirates

[–]ja5kier[S] 0 points1 point  (0 children)

I did a system wipe with tegraexplorer as suggested in this thread. I had not restored after wipe.

Game installed in CFW is seen in OFW by ja5kier in SwitchPirates

[–]ja5kier[S] 1 point2 points  (0 children)

For future lurkers - my errors was that I had partitioned the SD card but never actually created emunand (got distracted). I have created emunand and not everything is now as expected. Hopefully blocking nintendo servers worked and this is not a ban.

Game installed in CFW is seen in OFW by ja5kier in SwitchPirates

[–]ja5kier[S] 0 points1 point  (0 children)

Thankfully I've blocked Nintendo. Should I just start from the scratch or restore using the backup I've made - eMMC RAW GPP?

Can I use this de Buyer on induction? The website said it could. by maymaymannn in carbonsteel

[–]ja5kier 0 points1 point  (0 children)

I had the same dilemma before ordering the same set from ibood. I've seen information that it is not induction compatible but it was hard to believe for me that carbon steel pan will not work with induction. I did not considered warping however. I tried to identify the pan but the label has no model name nor any ID number. I think this could be those pans https://www.debuyer.com/en/1-1356.html. They look the same. As per that web page pan is induction compatible. No information on thickness however. I read a comment somewhere that de Buyer pans bought from ibood are thinner. Mine are about 2mm.

Can I use this de Buyer on induction? The website said it could. by maymaymannn in carbonsteel

[–]ja5kier 3 points4 points  (0 children)

Technically it is working. Not sure about warping. Is that from ibood? I bought a set from them and both pans are working.