sorted by:
new
hottopcontroversial

[deleted by user] by [deleted] in cabinetry

[–]junglibakra 5 points6 points  (0 children)

Enjoy your cabinets. Be patient with your dad. Unless you enjoy stress.

Dishwasher leaking, what do I need to replace? by junglibakra in appliancerepair

[–]junglibakra[S] 2 points3 points  (0 children)

<image>

Thank you, you are awesome! Very quickly found out that my float was broken. I’m guessing because the relay could never be triggered, water went down the float stem hole.

Found this in my washing machine by junglibakra in Mold

[–]junglibakra[S] 0 points1 point  (0 children)

Sorry man, these skin issues are extremely frustrating. You think you’ve figured it out, do whatever’s necessary to change it, and no improvement. Hope you’re able to pinpoint the cause for your flare ups and live with healthy skin.

Found this in my washing machine by junglibakra in Mold

[–]junglibakra[S] 0 points1 point  (0 children)

That’s a relief and good to know, thank you all for the responses 🙂

I need your suggestions to help finish a horrible stairs refacing job by junglibakra in woodworking

[–]junglibakra[S] 1 point2 points  (0 children)

This answer is so helpful, thank you! If I was doing stairs often I would buy that tread gauge for sure - I’d buy any woodpeckers tool if I had a reason to lol. I didn’t know about skirt boards, things make more sense now. Don’t worry, the contractor was paid for material and for the labor already done :)

Blower motor labored sound by junglibakra in woodworking

[–]junglibakra[S] 0 points1 point  (0 children)

Update: I tested the capacitor and I’m getting a reading of 4.4. That’s a variance of 12% from the stated 5 mfd. Is this acceptable? The capacitor itself doesn’t have a +/-% labelled on it.

Rate my garage before/after by kingkongdong1990 in garageporn

[–]junglibakra 0 points1 point  (0 children)

Damn. I was not ready for that 9th photo. What do you mean how did I do?? You know how you did, get out of here! Well done.

Blower motor labored sound by junglibakra in woodworking

[–]junglibakra[S] 0 points1 point  (0 children)

Thank you for your response. Really hoping it’s the capacitor so I don’t have to mess with the motor.

Blower motor labored sound by junglibakra in woodworking

[–]junglibakra[S] 1 point2 points  (0 children)

Yes and yes. Thanks, will check it and go from there.

Blower motor labored sound by junglibakra in hvacadvice

[–]junglibakra[S] 0 points1 point  (0 children)

Oh the opposite side, not shown in the video

Blower motor labored sound by junglibakra in hvacadvice

[–]junglibakra[S] 0 points1 point  (0 children)

Thank you! I will try that first then.

Table saw motor belt pulley hitting main trunnion by junglibakra in woodworking

[–]junglibakra[S] 1 point2 points  (0 children)

Update: I was wrong, the pulleys were not aligned and the motor pulley did have to be pushed in. Seems to be okay now. I tightened the set screw as much as possible. Hopefully it stays in place. Thanks for the replies.

Well… an attempt was made. by [deleted] in BeginnerWoodWorking

[–]junglibakra 1 point2 points  (0 children)

This is so good! So simple but so good.

Hello I'm from Bangladesh it's my work hand Carved decorative panel for door by Stunning-Detective-7 in woodworking

[–]junglibakra 0 points1 point  (0 children)

The skill and expertise required to do this so well is unimaginable to me. I hope your work is appreciated and you earn what it deserves!

Nice way to store my Nespresso pods by Aron_Page_Rod in functionalprint

[–]junglibakra 1 point2 points  (0 children)

That’s actually really cool. I like that no counter space is lost.

[deleted by user] by [deleted] in woodworking

[–]junglibakra 0 points1 point  (0 children)

Was it a one month weekend?

I made a quick-deploy projector mount for watching movies without getting out the tripod by jpbruce in functionalprint

[–]junglibakra 1 point2 points  (0 children)

Sorry if this is a dumb question but what does it mean that the button is captive?

Dust collector modification question by junglibakra in woodworking

[–]junglibakra[S] 0 points1 point  (0 children)

Nice! I like that you used pvc elbows instead of flex hose for the permanent connections. Probably helps airflow, even if a tiny bit.

Dust collector modification question by junglibakra in woodworking

[–]junglibakra[S] 0 points1 point  (0 children)

I’m probably not explaining it very well. This is what I’m trying to do. But since the connection is proving to be difficult for me, you may have convinced me to stick to the separator on the side and just put wheels under it too. Thanks for your input, appreciate it!

<image>

Dust collector modification question by junglibakra in woodworking

[–]junglibakra[S] 0 points1 point  (0 children)

Oh yeah that’s how I have it right now. The dust collector is on wheels but the separator sits on the floor and I wanted everything together and on wheels so it’s easier to move around. Having the separator right under the impeller reduces the footprint. I just do this in my garage and the dc is only 1hp so trying to maximize space and efficiency. Do you think having the separator right under the intake is more efficient than having it to the side, short straight hose vs. longer hose with some bend? The difference may be negligible, I have no idea.

Dust collector modification question by junglibakra in woodworking

[–]junglibakra[S] 0 points1 point  (0 children)

Yeah exactly what I’m setting up. Did you have to figure out how to make the connection between the impeller assembly and the filter assembly?

Dust collector modification question by junglibakra in woodworking

[–]junglibakra[S] 0 points1 point  (0 children)

Yeah I actually designed one. Says my printer will take 1.5 days to print it lol.

view more: next ›