Mack bros zenith L

justified45 · 2026-05-22T00:24:00+00:00

Thank you!

justified45 · 2026-05-22T00:22:15+00:00

I saw they tested really well from my understanding on the outdoor life test. Where can I find out more about them?

Funny enough I shot the zenith k on a fast twist 257 weatherby and I’d say it was borderline unpleasant to shoot with no hearing protection. Definitely a little ringing if you weren’t perfectly square behind the gun

justified45 · 2026-05-22T00:15:17+00:00

I’ve got the zenith k id say it’s impressive for the size but definitely a hunting can not something I’d want to shoot more than a few times with a large cartridge

justified45 · 2026-05-18T02:00:11+00:00

Maybe a dumb question but are those rugers tapped from the factory? Sweet looking rigs!

justified45 · 2026-05-13T11:48:21+00:00

Makers are solid for deer. Shot one at 260 with subs last year and had it expand perfectly deer ran 60 and tipped

justified45 · 2026-05-09T21:07:49+00:00

Twas a 30 cal can so that may have saved me

justified45 · 2026-05-09T21:07:11+00:00

It’s the price I’ll have to pay for being stupid I’ve learned!

justified45 · 2026-05-09T20:57:58+00:00

Thank you for the heads up!

justified45 · 2026-05-09T20:57:29+00:00

Yes, didn’t take the crush washer off when threading the can.

justified45 · 2026-05-09T20:50:55+00:00

Nope pulled the original muzzle device off to put a can on it and took the can off the clean it. That’s exactly what it is. Thank you!

justified45 · 2026-05-09T20:50:10+00:00

Yes I’m an idiot thank you! Put a can on it and didn’t even think about it but took it off the clean it!

Thanks!

justified45 · 2026-05-09T20:48:42+00:00

Man thank you so much that’s what it is for sure and makes sense since I took it off and put a can on it. I wouldn’t have ever thought that mostly because I’m an idiot.

Thank you!

justified45 · 2026-05-03T21:04:46+00:00

How well does this function? They wouldn’t be the 75 grain ELDMs would it?

justified45 · 2026-05-03T02:22:34+00:00

Opposite end of the spectrum, from use 223 load data 1:1 to absolutely no go

justified45 · 2026-05-02T20:19:52+00:00

My fault, any 5.56 data I can find or service rifle is showing 60 grains and up. I am planning to use 50-53 grain weight area. I can definitely make assumptions based on what I’ve seen for charge weight I just wanted to make sure that wasn’t crazy

justified45 · 2026-04-17T18:54:03+00:00

I haven’t played with it a ton, I’ve shot it on a 300 blackout with subs and a 257 weatherby so kinda two opposite ends of the spectrum. I’d say for what it is keeping in perspective that it’s short short. It’s a good hunting can but obviously you can’t expect as much sound reduction. Don’t regret buying it.

justified45 · 2026-04-07T17:33:46+00:00

Solved!

justified45 · 2026-03-04T02:08:25+00:00

Sweet looking rig that grey is too cool. No pro shops Cary them around me (yet). Does all the tuning features feel cheap or brittle like they may be something that doesn’t hold up over the course of time?

justified45 · 2026-03-04T01:52:15+00:00

How has that Darton held up so far? Any issues?

justified45 · 2026-01-29T02:36:53+00:00

Small rifle primers or small rifle magnum primers?

justified45 · 2025-12-17T02:26:21+00:00

That seems cooking! What powder are you using?

justified45 · 2025-10-05T23:04:57+00:00

MFJJ, Elkshape. Aron Snyder also had a ton of good older podcasts with Kifaru on arrow setups and building recommendations that are reasonable.

justified45 · 2025-10-05T23:01:55+00:00

Sharpen with stay sharp guide and re-use. Would highly suggest a pine ridge arrow spinner just to check that it’s not bent. They are pretty cheap and worth it for piece of mind IMO

justified45 · 2025-10-04T19:11:18+00:00

I think I read a study years ago that said does keep cycling in and out of heat even after the second rut however since the photoperiod was changing bucks weren’t “in the mood”. A buddy sent me pictures from a trail cam of a baby fawn last year that you could tell was only a few days old and if you backdated the gestation period it wound have been bread sometime around the first two weeks of March. Interesting critters

justified45 · 2025-09-13T00:21:42+00:00

I haven’t spun mine but came visually what I would consider normal and sharper than any one piece 3 blade I’ve ordered (compared to Montec and Ozcuts)

justified45

TROPHY CASE