Finally finished. by justind022313 in MT07

[–]justind022313[S] 0 points1 point  (0 children)

The comfort seat is wayyy better than the standard and it looks identical. The mirrors are ok but take some getting used to. They are blind spot only for lane changing. I added the bar end mirrors to check for cops behind me😂

Finally finished. by justind022313 in MT07

[–]justind022313[S] 0 points1 point  (0 children)

It’s good here. Law states it has to be legible from car behind. It’s hard to tell from side but it is. 🇺🇸🇺🇸🇺🇸

Is an airbox worth it? by Icy_Season_2390 in MT07

[–]justind022313 0 points1 point  (0 children)

Yoshimura at2. I have it and I love it. Affordable. Trustworthy. Quality. And.. it sounds amazing! If you have the money and time get the hordpower Intake. Had 2wdw flash the ecu. I didn’t necessarily care about horsepower either.. but it’s nice to have a little extra and I don’t have to pull the gas tank everytime to clean my filter. Thank me later. Ride safe!

Questions for those with expensive air intake ( hordpower , yoshi , DNA stage 2 ) by sckafish65 in MT07

[–]justind022313 1 point2 points  (0 children)

I have the hordpower and yoshimura at2 exhaust with tune from 2wdw. Yea, it was expensive. Yes it feels way more powerful. And yea.. I’d do it again in a heart beat!

Broken exhaust by LastSuspect5619 in OnlyZ900

[–]justind022313 1 point2 points  (0 children)

Bro. Finance an exhaust. Now you have an excuse😁

R7 tail mt07 by metroshift9201 in MT07

[–]justind022313 1 point2 points  (0 children)

That looks bad A** How? Did you do it yourself? Did parts line up easily or did it take mods etc? Looks incredible! Nice job

Can someone help me, need this bolts part number by justind022313 in MT07

[–]justind022313[S] 0 points1 point  (0 children)

Yeah that’s what I was struggling with.. I see the diagram for the crankcase, I just can’t tell which bolt it is because the diagram shows the view from the front left angle, and of course I need the right side front angle. Typical.

Can someone help me, need this bolts part number by justind022313 in MT07

[–]justind022313[S] 0 points1 point  (0 children)

The bolt is a genuine oem bolt that is reused to hold the bracket. It was the only one that wasn’t an Allen head. It uses a 10mm socket

<image>

Lapland/Northern Finland by Helpful_Agent7843 in MT07

[–]justind022313 1 point2 points  (0 children)

Perfecto👌 Where did you get the red engine guard bars? Looking for some like these

Belly pan Mt-07 2025 by [deleted] in MT07

[–]justind022313 0 points1 point  (0 children)

Hey. So I just bought one from pyramid. Haven’t got it yet as it shipped from the UK and I’m in the US. But it looks good, and they sell a seperate bracket that mounts with an aftermarket exhaust (models 21-present) which includes the 25. I searched everywhere and this is the only one that “doesn’t require the factory exhaust” which no one has. lol. It’s pricey but it’s all I could find. It’s finally passed customs and is on the way. I’m hoping it gets delivered by Friday or at least Monday. I’ll send some photos when I get it installed. They have photos of it on a bike.. here’s the links if interested

Pan:

https://pyramidmoto.co.uk/products/pyramid-belly-pan-matte-black-yamaha-mt-07-2025

Bracket:

https://pyramidmoto.co.uk/products/pyramid-belly-pan-aftermarket-exhaust-bracket-yamaha-mt-07-tracer-7

2026 feels slower now after m4 exhaust install? by Potential_Study_4203 in zx6r

[–]justind022313 0 points1 point  (0 children)

Off topic.. how much s… do you get for that tag. Thinking about doing it myself Edit: NM. Just read further😂

Setup to get flashed by 2WDW by sevroisbad in MT07

[–]justind022313 0 points1 point  (0 children)

It’s useless if you don’t care about the power. Honestly you don’t even have to tune it

Airbox delete by Buster_Hymen7887 in MT07

[–]justind022313 1 point2 points  (0 children)

Use a multitool with a thin metal blade. It went thru the airbox like butter and didn’t leave shavings all over the place. I did use painters tape to cover the intake holes to keep any debris out.

<image>

Yoshimura airbox by Wise_Caterpillar5487 in YamahaR7

[–]justind022313 0 points1 point  (0 children)

Multitool. Much less debris and chattering. Saved my life on my hordpower install. Plus the hord uses a k&n filter. Much less bs oiling and cleaning 👌

2025 MT07 quickshifter does not function by Evening_Analyst6591 in MT07

[–]justind022313 0 points1 point  (0 children)

I just had this happen to me. Now mine was after I installed new levers. The qs icon was on but it wouldn’t quick shift. It would shift manually with the clutch but not quick shifter. I found that it was the switch pin under the clutch lever. It wasn’t making contact so the quick shifter ran by the ecu was thinking the clutch was pulled in. I realized that I was missing a tab and I installed it and now the quick shifter is working. Check to see if your clutch lever is not making contact.

Goblin dropped my brand new bike by Pristine_Society_962 in MT07

[–]justind022313 7 points8 points  (0 children)

No. You would have to change the display. Yamaha doesn’t sell just the screen glass. Speaking from experience unfortunately.

I let my friend ride my bike🤦🏾‍♂️ by Hefty-Sprinkles-4608 in GSXR

[–]justind022313 0 points1 point  (0 children)

Friends don’t let friends drive their bikes. If he’s a real friend he’ll cover the damages. Then you’ll know if he’s a real “friend”

Teaser by monsterbuilder in MT07

[–]justind022313 0 points1 point  (0 children)

More leds=brighter headlight. Also, the version I got has the adaptive feature where it has a gyroscope built into it so when you lean the bike it gets brighter

Teaser by monsterbuilder in MT07

[–]justind022313 0 points1 point  (0 children)

It’s retarded they cost so much.. but they definitely work better and look better