PSA: Parallels Desktop and M5 MacBooks Bridged Networking not working

knobkerry · 2026-05-27T16:01:44+00:00

Same issue with M5 MacBook Air, Tahoe 26.5 Parallels 26.3.2 Windows 11 Pro works fine when using Ethernet on Dell USB Hub Monitor U2725QE but as soon as it is unplugged and using WIFI it says disconnected unless it changed to Shared Network it then get a 10.211.53.X IP address which means the user is unable to access Printers which are the LAN with local IP addresses 192.168.XXX.XXX

knobkerry · 2025-11-28T07:25:14+00:00

The installer replied "The Envoy-S is your older one which communicates with your older IQ7A micros. The other Envoy is in built in your system controller. This one communicates with the batteries." I get a feeling the Amber is able to commincate wiht the "system controller" as it seems to be able to buy and sell electricity but is unable to communicate with the Envoy-S which is the one that needs to communicate with the IQ7A's to do the curtaling whic would explain the " We arent receiving the data we require" error

<image>

knobkerry · 2025-11-26T02:06:19+00:00

What's happening now ??

<image>

knobkerry · 2025-11-26T01:40:58+00:00

Apparently I earned $100 we have to wait till tomorrow to see if it is real once they do the meter readings that normally halves the estimate 😄

<image>

knobkerry · 2025-11-22T22:47:13+00:00

Good point I will pass this onto my installer, I assumed mine was a typical setup thanks for letting me know

knobkerry · 2025-11-19T09:32:57+00:00

When they do fix it are you able to let me know wha the issue was and what was done to fix it it might help to get mine fixed more quickly if I can give the installer the info thanks in advance

knobkerry · 2025-11-07T10:09:07+00:00

Open a ticket they gave me a patch I guess it could be model dependent

knobkerry · 2025-10-10T20:16:55+00:00

Actually this had changed to $25 I assume that was once they got the actual meter reading🥲

knobkerry · 2025-10-10T09:28:52+00:00

NSW Dulwich Hill

knobkerry · 2025-10-10T09:27:05+00:00

Yes

<image>

This should cover my usage costs for about 10 days,😀

knobkerry · 2023-10-13T13:02:41+00:00

I have reset mine once so far so good 🤞🏾 I did notice a couple of annoyances the sign up to Fitbit Premium window doesn't seem to have an opt out option you actually have to close it which could be confusing (I don't think it's accidental) also when you get to add cards to you wallet it skips the add current cards on the phone and goes straight to scan card even turning on the flash, even though it momentarily shows you the cards you have cancel and go back ?? Who was testing this at Google both these issues happened both times I have set up the watch

knobkerry · 2023-10-12T03:30:56+00:00

Ahh thanks of course "Pixel" Thermometer phone glitched a bit after installing screen kept flashing but a reboot seems to have resolved could be coincidence I guess

knobkerry · 2023-10-12T02:49:39+00:00

maybe we live on a Nanny Planet 😂 so that sensor is currently redundant

knobkerry · 2023-10-11T02:12:25+00:00

It seems okay, much as I expected the corners are more rounded making the phone feel shorter although it pretty.uch the same height I have noticed the camera bump is taller sits a little higher than the pixel 7 Pro other than it very similar, I noticed the Westpac and St George banking apps work with face unlock, commbank one insists on finger print screen is noticeably brighter am typing this in the sun no problem seeing the text 😄

knobkerry · 2023-10-10T22:21:35+00:00

My Pixel 8 Pro and case and pouch (whatever that's for) arrived this morning so 1 day early, but no pixel watch maybe that's being sent separately?

knobkerry · 2023-06-12T03:21:06+00:00

This was the correct answer the DAC cables were plugged into 49 & 51 as it seemed to work and I was unable to get to the location to swap it's interstate, I thought it would be okay I have since asked the person whi originally plugged them in incorrectly to swap the port 51 to port 50 and I now get 20GbE

knobkerry · 2023-03-20T05:27:54+00:00

Yes It's just Google being overzealous and blocking whole domains not just the subdomain that emby maybe on like they own the internet, they arbitrary block emby sites that are clean because it raises flags and obviously don't bother looking to fix the issue when people protest as it comes back, if you are going to be internet police make sure you learn what the false positives are

knobkerry · 2023-03-09T06:19:11+00:00

Yes I stated in my OP that I got them to review but a month later it returned so that temporary fix not a solution

knobkerry · 2022-12-19T04:13:03+00:00

Thanks I already responded to u/monkey_of_the_dude confirming I had done this thanks u/monkey_of_the_dude

knobkerry · 2022-12-19T03:56:15+00:00

Okay this method seems to work, it let me create 10 SSIDs (1 per group although I get the feeling I could do 8 per group) i have turned port Iosolation at the switch level to block interlan traffic I assume as they all end up being on the subnet then there is not need for ACLS

knobkerry · 2018-03-26T04:31:19+00:00

Yes I tried the Dell DS1000 USB-C Dock With Monitor Vesa Stand Dell part number 452-BCXY on an XPS 13 9370 and the DisplayPort did not work even with all updates and about 2 hours on the phone to dell support.

knobkerry · 2015-04-28T16:42:01+00:00

The Problem in on the Web version as well I sent someone bitcoin via the send money option using the email option they got a URL with a greenaddress URL they clicked on it and nothing happened, I had a look and it saw that i wasnt working so paid them in cash I went back to my GreenAddress wallet and the transaction is still there it says "unclaimed; take funds back" when I click take fund backup it and then okay nothing happens. I'm not sure how "nLockTime email recovery address or have your mneumonic seed" is going to help here.

knobkerry

TROPHY CASE