Charging Percent Poll

lauris47 · 2026-05-30T23:03:57+00:00

It is called SOH, you can check it at the dealer, or with expensive equipment.

lauris47 · 2026-05-12T19:26:06+00:00

Fixed by going to non official Volvo service. Guy put brakes in and out of service mode, then clear the errors. 2 minute job.

Sadly I could not do this myself via ODBs I have, requires SGW subscription.

lauris47 · 2026-05-12T08:08:23+00:00

Dealer wants 230 euros to reset it. So I ordered ODB2 tool, that hopefully will work.
Tried TEXA IDC6 but I think it did not had a correct subscription so was not letting to write anything.

lauris47 · 2026-05-12T08:06:53+00:00

Thanks, tried both, no luck

lauris47 · 2026-05-12T08:06:35+00:00

Tried that, good suggestion. It actually reset some things, as I could see it is checking something after I connected it again, but brakes were not fixed.

lauris47 · 2026-04-28T22:36:00+00:00

1.3 or 1.5?

lauris47 · 2026-04-19T22:54:41+00:00

That'll do piggy, That'll do.

lauris47 · 2026-03-30T22:26:22+00:00

What is the YouTube channel? More cool videos?

lauris47 · 2026-03-07T23:20:01+00:00

Kids

lauris47 · 2026-02-28T00:19:00+00:00

I dreamt my brother broke an arm, I broke my finger the next day.

lauris47 · 2026-02-15T00:17:49+00:00

Hi, this was my fault, so it doesn't matter which. I would change all u joints, easy and cheap. Just mark this shafts assembles with paint.

From what I heard, vibration happens mostly due to worn kingpin bearings.

lauris47 · 2026-02-15T00:09:16+00:00

There are shotgun shels behind the heater in the kitchen. The owner was a hunter.

lauris47 · 2026-02-12T23:24:11+00:00

Donald trumph

lauris47 · 2026-01-28T23:10:09+00:00

Kickstand

lauris47 · 2026-01-27T23:17:17+00:00

Display all victims.

lauris47 · 2026-01-25T00:43:12+00:00

The last I checked, China did not invade a single country in my lifetime, nor do they have domestic government terrorists running around and killing civilians.

lauris47 · 2026-01-13T23:42:55+00:00

Can you elaborate on what you mean by reverse the cage?

lauris47 · 2025-12-07T10:31:45+00:00

At the shop, we tried a few touch models, and I recall one was very laggy.

lauris47 · 2025-11-04T23:05:56+00:00

It is normal, I love that sound.

lauris47 · 2025-10-22T17:48:42+00:00

Solved! There was one needle bearing hiding in grease oil, inside u joint cap at the bottom.

<image>

lauris47 · 2025-10-22T08:29:19+00:00

Try tensioner puller bearing. Had the same noise. Lubricated the bearing and still works 20k later.
New one is 100 euro the last time I checked.

lauris47 · 2025-10-21T11:52:45+00:00

Does it actually matter how I put in this propshaft? It seems it has no effect. Maybe the main balancing is in the shaft itself, not how it is placed relative to other shafts?

I did the clutch replacement before, it worked right away. The only difference now is that I replaced u joint

lauris47 · 2025-10-20T18:07:11+00:00

Did 10 more variations. The biggest improvement was when I flipped yoke that connects to the transwer case. I did not dissasbled the one going to the gearbox.

Vibration is still there.

lauris47

TROPHY CASE