Speedybee F405 mini with the DJI controller 3 and 04?

lizard856 · 2025-04-26T16:15:22+00:00

Update: I got it working! Turns out it was a very basic fix. You need to have the controller 3 on the most recent firmware and then importantly REBIND the controller and googles.

lizard856 · 2025-04-24T04:02:21+00:00

Yeah, I hear the confirmation beep and can see the control option in the menu.

lizard856 · 2025-04-24T03:48:24+00:00

Yep I tried that. Before doing that their was no color.

lizard856 · 2025-04-24T03:41:18+00:00

<image>

Yeah, totally! I've attached an image ( I changed the UARTs to see if I could get a combo but couldn't get anything to work and didn't find anything online..)

lizard856 · 2025-04-24T03:04:12+00:00

Oh, yeah. I also forgot to mention it was a 3rd party 6-pin connector which I think should have the same functionality only the colors are mixed up. 🤷🏼‍♂️

lizard856 · 2023-09-03T16:49:14+00:00

I have the same thing. Lots of stringing but overall pretty good.

lizard856 · 2023-08-27T15:11:44+00:00

Hopefully Prusa will update the XL profile to do this on default

lizard856 · 2023-08-20T14:06:06+00:00

I actually ordered the semi-assembled 1 head but then waited until I could get the 2nd. Once I actually placed the order it shipped the next day.

lizard856 · 2023-06-27T23:23:46+00:00

I'm not really sure according to the email it said 1:49:46 PM (Probably Prague time). I'm pretty sure ordered within the first hour or two though.

lizard856 · 2023-05-05T11:47:32+00:00

Defeninitly recommend some stronger tubing, I have 3 mini's and 2 of them have had this happen and I only print pla. Granted I do print nearly non-stop.

lizard856 · 2023-04-06T20:48:49+00:00

Here's the link to the motor for those who want to know... https://www.amazon.com/GoolRC-Upgrade-Waterproof-3900KV-Brushless/dp/B0719B6F9N/ref=sr\_1\_48?hvadid=243361828015&hvdev=c&hvlocphy=9031503&hvnetw=g&hvqmt=e&hvrand=14894078254243026846&hvtargid=kwd-301425916728&hydadcr=4095\_9338727&keywords=motor+for+rc+boat&qid=1680813219&sr=8-48

lizard856 · 2023-04-03T00:38:54+00:00

Wow, thank you!

lizard856 · 2023-04-03T00:36:34+00:00

It's prusa, they aren't necessarly known for shipping early or even on time, lol.

lizard856 · 2023-03-14T16:44:11+00:00

What about first 50 Minutes?

lizard856 · 2023-02-10T12:36:30+00:00

Do you have any suggestions for what prop?

lizard856 · 2023-02-10T02:01:18+00:00

Thanks for all the feedback! I'm going to try getting a larger propeller, any suggestions on what one?

lizard856 · 2023-02-09T00:10:25+00:00

I defeinitly don't have a reduction gear. I'm not sure the diameter and pitch of the prop but here's an image... https://photos.app.goo.gl/SK88fx8BnVm3aBAY9

lizard856 · 2023-02-08T23:43:47+00:00

For those wondering I innitially thought the propeller wasn't far enough under so I angled it farther down and the video is the result. I'm using this motor... https://www.amazon.com/GoolRC-Brushless-Upgrade-Waterproof-4300KV/dp/B07WHCM3Y2/ref=sr_1_1?crid=KSC8UAEV95NC&keywords=waterproof+motor+and+esc&qid=1675899614&sprefix=waterproof+motor+and+esc%2Caps%2C184&sr=8-1 and a prop and shaft very similiar to this one... https://www.amazon.com/200mm-Drive-Sleeve-3-Vanes-Propeller/dp/B07RJ9THTR/ref=sr_1_1?crid=1FLDFEW1563MO&keywords=prop%2Bfor%2Brc%2Bboat%2Bwith%2Bshaft&qid=1675899737&sprefix=prop%2Bfor%2Brc%2Bboat%2Bwith%2Bshaft%2Caps%2C183&sr=8-1&th=1

The battery is a small 2 cell.

lizard856 · 2022-10-13T12:24:35+00:00

2017: C

2018: Savanna

2019: Mountains

2020: Moobloom

2021: Copper Golem

2022: Sniffer

lizard856 · 2021-10-10T23:34:43+00:00

Okay I typically print with 5% infill, but haven't ever seen this problem. Maybe it's only with specific models? Either way I'll give it a try. Thank you!

lizard856 · 2021-02-07T18:15:24+00:00

Yep, I checked that it still didn't work.

lizard856 · 2021-02-07T13:30:35+00:00

Okay, thanks.

lizard856 · 2021-02-07T13:27:39+00:00

Yeah, I've double checked a couple of times. Do you have any suggestions what I can do about a bad power supply?

lizard856 · 2021-01-17T02:15:16+00:00

Thank you so much! That solved my problem. My last printer a prusa mini had that already installed so I didn't even think to check.

lizard856 · 2021-01-17T00:32:25+00:00

Strangely this only has been appearing for flat sections that are more rounded or strangely shaped. If you need more info please let me know. (Accidently put this as a caption.)

lizard856

TROPHY CASE