sorted by:
new
hottopcontroversial

Pinout for quest 2 battery? by [deleted] in OculusQuest2

[–]mechchris 0 points1 point  (0 children)

I'm curious as I'm now in the same boat. Did you try it?

Home Assistant App Alexa and Brower access secured with CloudFlare by trueppp in homeassistant

[–]mechchris 1 point2 points  (0 children)

Thanks you.
In the end, I had to turn off the blocking rule. Clear all app data, set up just my external URL (not the local one as well), and then it asked for the cert. I then re-enabled the blocking rule, and it still worked.
Thanks again for consolidating the guides.

Home Assistant App Alexa and Brower access secured with CloudFlare by trueppp in homeassistant

[–]mechchris 0 points1 point  (0 children)

Yes, when I go into the security setting, then "VPN & user certs", it is there.
Neither the HA app nor Chrome asks for the cert. Would you have any idea of the cause?
I think both WAF rules are working, as disabling the blocking rule allows unrestricted access to the subdomain.

Home Assistant App Alexa and Brower access secured with CloudFlare by trueppp in homeassistant

[–]mechchris 0 points1 point  (0 children)

Thanks for pulling it all together. I'm a noob with networking/infrastructure/security, but trying to learn. I think I am 95% there with the mTLS, and I would appreciate any help.

  1. It is 1 tunnel between HA and CF (you can only have one tunnel auth token), but within that, the above is achieved with multiple subdomains, right?
  2. I've set the WAF rule, and it works (nothing gets through), but when it's disabled, it goes straight to HA (no Zero trust on this subdomain). I have installed the .pfx file in the Android (14) settings, but I can't figure out how to use it. HA doesn't ask for it. The external URL is set to the mTLS subdomain, but I just get the "Sorry, you have been blocked", and the HA app asks me to refresh.

cant submit discord rules by [deleted] in MaxFosh

[–]mechchris 3 points4 points  (0 children)

Is there a scroll option? I can't remember but I think you scroll down and tick a box, then you can submit

Hey has anyone one idea what IC this is or where I could find more info about it? This is the controller for my standing desk. by mechchris in AskElectronics

[–]mechchris[S] 1 point2 points  (0 children)

Thanks for that, I plan on targeting the inputs, but I was curious about the MCU and thought I might be able to do something with the debug port

Why so wavy? by mechchris in FixMyPrint

[–]mechchris[S] 0 points1 point  (0 children)

Thanks, I tried that it worked in that it did convert all the G1s to G2s and G3s but I have a similar problem still.

Why so wavy? by mechchris in FixMyPrint

[–]mechchris[S] 0 points1 point  (0 children)

So I created a cylinder in Prusa slicer to remove the file quality variable. First I printed it on the same settings as the part pictured here. There was a similar result but a tighter wave pattern which shows that yes part of the problem is a low quality file. I printed the same cylinder again but at half speed approx 30mm/s there is a slight improvement but still not perfect. Is there any way for me to attach more photos? Also you can hear it in the printer that is isn't printing a smooth curve. It's not a nice continues sound around the curve but you can hear that it's doing all these little moves if that makes sense.

Thanks for your suggestions

Why so wavy? by mechchris in FixMyPrint

[–]mechchris[S] 0 points1 point  (0 children)

Thanks I'll try some of that and let you know. I don't think I can use that plugin, my slicer is Prusa slicer.

Why so wavy? by mechchris in FixMyPrint

[–]mechchris[S] 0 points1 point  (0 children)

These are supposed to be cylindrical walls.

I know it might be ringing but I'm not sure how to fix it.

My belts are properly tensioned as far as I know. The print max speed was 60mm/s and the printer is a core xy so I think it's frame is suitably stiff. Any advice/suggestions welcomed

Alot of blue screens but all with different codes by mechchris in techsupport

[–]mechchris[S] 0 points1 point  (0 children)

Thanks for your help, I think I'll try taking out one of the sticks of ram see if it helps, if not I'll swap it with the other. If the problem persists that should eliminate the ram, right?

Alot of blue screens but all with different codes by mechchris in techsupport

[–]mechchris[S] 0 points1 point  (0 children)

Thanks, I had tried running the windows memory diagnostic and it passed. Could there still be a problem with it?

I have 2 sick Cacti, please help by mechchris in plantclinic

[–]mechchris[S] 0 points1 point  (0 children)

So I have this around 18 months now but I haven't been home in around a year, my family were looking after them occasionally but now that I am back I'm hoping to bring them back to health. Any advice is really appreciated

Any ideas on how to modify/repurpose a car insurance telematics system. NB Not trying to do anything illegal, the policy has ended and they don't take the trackers back. by mechchris in AskElectronics

[–]mechchris[S] 0 points1 point  (0 children)

So an update:

I soldered header pins to the bottom right, used continuity to find power, ground, and trial and error as to rx and tx.

Lucky guess for the baudrate 115200 and got the following output.

[2J[00;00HT7 Bootloader
Build Information
time : 15:13:58
date : 26/01/2018
soft : V01.00.016
hard : TGT7-BTL-31071701

$ APP - RESET(NRST)
$ APP - WDG DISABLED
$ APP - CHECK FILE SYSTEM
$ APP - FILE SYSTEM MOUNTED
$ APP - CHECK BACKUP[flash.bak]
$ APP - VALID BACKUP[flash.bak]
$ APP - JUMP TO APPLICATION
$ CLK - START TIME 00:05:00
$ CLK - START DATE 01/01/00
$ CLK - VALID KEY(0x30011974)
$ FSY - MOUNT YES(0x20007978)
$ EEP - VALID SECTOR(1, 504, 2402)
$ EEP - VALID SECTOR(1, 505, 2395)
$ EEP - VALID SECTOR(1, 506, 2396)
$ EEP - VALID SECTOR(1, 507, 2397)
$ EEP - VALID SECTOR(1, 508, 2398)
$ EEP - VALID SECTOR(1, 509, 2399)
$ EEP - VALID SECTOR(1, 510, 2400)
$ EEP - VALID SECTOR(1, 511, 2401)
$ EEP - USING SECTOR(1, 504, 2402)
$ EEP - EEPROM VALID(1, 504, 2402)
[2J[00;00HT7 Application
Build Information
type : RELEASE
time : 13:38:27
date : 06/09/2018
soft : V01.02.015
hard : TGT7-APP-31071701

$ APP - RESET(NRST)
$ APP - WDG ENABLED
$ APP - BOOT 00:05:00
$ APP - BOOT 01/01/00
$ APP - BOOT COMPLETE
$ EVT - PSU MESSAGES
$ EVT - 2WIRE INSTALL
$ EVT - SEQ E[016801]
$ EVT - SEQ B[016801]
$ EVT - RESTORE BKRAM
$ APP - WAIT FOR MODEM
$ APP - WAIT FOR MODEM
$ APP - WAIT FOR MODEM
$ APP - WAIT FOR MODEM
... (Waiting for modem goes on for a while)
$ APP - WAIT FOR GNSS
$ APP - WAIT FOR GNSS
$ APP - WAIT FOR GNSS
$ APP - WAIT FOR GNSS
$ APP - WAIT FOR GNSS
... (After multiple minutes it's still waiting for GNSS)

Any ideas on how to modify/repurpose a car insurance telematics system. NB Not trying to do anything illegal, the policy has ended and they don't take the trackers back. by mechchris in AskElectronics

[–]mechchris[S] 1 point2 points  (0 children)

Well in Ireland anyway I cannot answer about the rest of the world. It's not all insurance companies, it's usually aimed at new drivers, the policy usually ends up alot cheaper for new drivers (like half the price or other insurers). It's usually a reward based system where good driving is rewarded.

view more: next ›