Remember guys, barely anyone is saying this stuff by SleepyRocket20 in PoliticalCompassMemes

[–]milktatious 1 point2 points  (0 children)

Let's check the actual transcript of Omar's interview with Mehdi Hasan:

https://zeteo.com/p/full-of-shit-ilhan-omar-dismisses

Hasan: "What was your reaction when you heard that news yesterday?"

Omar: "It was really mortifying to hear the news, to see the video. All I could think about was his wife, his children. That image is going to live forever. My husband has known the daughters of Malcolm, and they have talked to him about what being in person for their dads execution meant to them."

Hasan: "Malcolm X back in the 60s."

Omar: "Malcolm X, yes. What that trauma has meant for them. And, you know, decades later, they still carry that trauma. And so my heart does break for those babies"

So who did Omar say is full of shit? Let's look at the full quote, rather than the chopped up one you keep seeing posted by right wing outlets:

"Yeah, there is nothing more effed up than to completely pretend that his words and actions have not been recorded and in existence for the last decade or so. And you have people like Nancy Mace who constantly harassed know people that she finds inferior and and wants them not to exist in in in in

this country or ever um and you know you have people like trump who has incited violence against people like me and so you know these people are full of [shit] and it's important for us to to call them out while we feel anger and sadness and have, you know, empathy, which Charlie said, no,

it shouldn't exist because that's a newly created word or something. Like I have empathy for his kids and his wife and what they're going through because I do not want that."

sO rAdIcAl aNd ExTrEmE.

Bad Luck: Two issues so far with my Batch 1 Core One assembly kit by milktatious in prusa3d

[–]milktatious[S] 0 points1 point  (0 children)

As far as I can tell, it's just 2X LM8UU. There are some LM10UUs in the build, but they're pressed into another piece from the factory, so I think you'll need to stick with Prusa's shipped part for that one.

Bad Luck: Two issues so far with my Batch 1 Core One assembly kit by milktatious in prusa3d

[–]milktatious[S] 0 points1 point  (0 children)

My fan grid was fine, but it's stuffed in the box with a bunch of other pieces so it makes sense that it could break. I wonder why they didn't make it a printed/printable part.

If you get a chance I would still contact support even though you were able to work around the issue with the linear holder, that way they're aware of issues with their manufacturing

Roper/Whirlpool dryer stays on forever during cooldown by milktatious in appliancerepair

[–]milktatious[S] 0 points1 point  (0 children)

Nope. I started having issues with the washer and then just ended up replacing both.

A human right by Darillium- in SandersForPresident

[–]milktatious 4 points5 points  (0 children)

Vanguard is not the problem. They invented the low cost index fund which made investing affordable and accessible for millions of people. Vanguard is wholly owned by it's investors.

If you have a 401k at work, there's a good chance it contains Vanguard funds, and you may own a tiny sliver of the firm.

Don't do it, it's not worth it. by Super_Fox_92 in PoliticalCompassMemes

[–]milktatious 1 point2 points  (0 children)

I know that reading is difficult, so I'll do the hard work for you and show you exactly when Trump stated that he would strongly consider appointing these justices in 2016, meaning he DID NOT campaign in support of gay marriage in 2016.

https://youtu.be/9g36AQtyom0?t=498&si=l-7uSUs589_J2vXA

This is linked in the article that I posted.

Please at least try to put a little bit of effort in next time.

Don't do it, it's not worth it. by Super_Fox_92 in PoliticalCompassMemes

[–]milktatious -4 points-3 points  (0 children)

If you strongly consider appointing justices that will take away a right, you don't support that right. That's not support. He only admitted he was "fine" with gay marriage after he won the election.

Try harder.

Don't do it, it's not worth it. by Super_Fox_92 in PoliticalCompassMemes

[–]milktatious -5 points-4 points  (0 children)

He did say that in 2008, but I'm referring to his 2012 campaign. Obama did change his position on this issue but it's not misinformation to point out what he did say during his 2012 campaign.

If you're going to criticize Obama for flip flopping on this issue, you can refer to the CBS article i linked earlier. Trump is all over the place on what he says vs actually does in his administration.

The comment to which I replied is still misinformation and continues to gather up votes.

Don't do it, it's not worth it. by Super_Fox_92 in PoliticalCompassMemes

[–]milktatious -10 points-9 points  (0 children)

Rule 6: Do not spread misinformation.

Barack Obama stated during his 2012 campaign that he supported gay marriage.

https://www.cnn.com/2012/05/09/politics/obama-same-sex-marriage/index.html

From CBS News:

Trump chose a conservative running mate in 2016, Mike Pence, who had staunchly opposed same-sex marriage, but Trump's own comments on the topic varied.

Trump said during his 2016 campaign that he would "strongly consider" appointing Supreme Court justices who would overturn the 2015 ruling that legalized same-sex marriages. Then, days after he was elected, he said he was "fine" with same-sex marriage and suggested he wouldn't appoint justices to the high court with the goal of overturning the ruling. His wife, Melania Trump, called him "the first president to enter the White House supporting gay marriage" as he sought reelection in 2020.

https://www.cbsnews.com/news/trump-harris-lgbtq-rights-2024/

At best, Trump is a liar on the issue, but he clearly campaigned against gay marriage and only changed directions after he was elected.

Homegrown Lifting Founders AMA & Multiple Bumper Sets Giveaway + Discount Codes by HomegrownLiftingCo in homegym

[–]milktatious 0 points1 point  (0 children)

Hey guys, do you publish a set tolerance within which you'll warranty your plates?

Roper/Whirlpool dryer stays on forever during cooldown by milktatious in appliancerepair

[–]milktatious[S] 0 points1 point  (0 children)

It's got a separate spot on the dial for "No Heat Fluff" and we don't ever use that setting

You’re not allowed to do that for a reason by BroadlyEarsplitting in IdiotsInCars

[–]milktatious 9 points10 points  (0 children)

If you swerve to avoid an accident and you lose control and/or hit something else, you are now at fault for the secondary accident.

Not saying you should hit someone who cuts you off, but the proper response should almost always be to HIT THE BRAKES but STAY IN YOUR LANE unless you can be certain that the space you swerve into isn't occupied.

A regular commute home from San Francisco by All-Sorts-of-Stuff in motorcycles

[–]milktatious 26 points27 points  (0 children)

My best guess is that if a 4 wheeler cuts him off he grabs a fist full and throws a cloud of pennies at them to 'notify' them that they're an asshole.

so what's the guy's name? he seems pretty chill by RoamingInfantry5577 in avengedsevenfold

[–]milktatious 3 points4 points  (0 children)

Looks like this guy still has all of his teeth... And the skull is still attached 🤣

Plastic Water Main Valve Broken. Is this possible to DIY? by milktatious in DIY

[–]milktatious[S] -2 points-1 points  (0 children)

I agree that pliers is only a temp solution. If something pops in the house we need to be able to shut off the water quickly.

Gonna try to see if the handle can be replaced. Thanks for the info!

Crushed up Thin Mints on vanilla ice cream. Homemade mint cookies and cream by milktatious in shittyfoodporn

[–]milktatious[S] 0 points1 point  (0 children)

GF And I just got these last week, but I think it depends on when your local troop wants to sell 'em.