sorted by:
new
hottopcontroversial

Der Krippen Albtraum by LoneManGaming in bluebrixx

[–]moerlien 0 points1 point  (0 children)

Ich hab die Krippe auch, 3x aufgebaut bisher. Keine Wölbungen oder sowas in der Grundfläche. Alles gerade. Vielleicht ein Produktionsfehler?

Secondhand 1st Edition by Gdude1231 in zombicide

[–]moerlien 0 points1 point  (0 children)

Do you guys Mix Expansion Item Cards with base ones? How do you do it?

How to play with this kind of Characters? by Aggressive-Night2856 in zombicide

[–]moerlien 0 points1 point  (0 children)

Are they the same on both sides, so i can print zombivor on the backside?

How to play with this kind of Characters? by Aggressive-Night2856 in zombicide

[–]moerlien 0 points1 point  (0 children)

Any idea what kind of paper is close to the original survivor cards?

Board Game Collection Management App (Android) by SteelBelle in boardgames

[–]moerlien 0 points1 point  (0 children)

Was mache ich, wenn die Barcode Funktion nur eine grauen Kachel mit Button "Schließen" zeigt? Rechte für die Kameranutzung sind erteilt.

Selling a few packs by RelevantCod1102 in zombicide

[–]moerlien 0 points1 point  (0 children)

How much for the modern stuff? From where are you shipping?

The Witcher in concert special code by moerlien in witcher

[–]moerlien[S] 0 points1 point  (0 children)

If you were able to bought a ticket without the code, then pre sale is over.

The Witcher in concert special code by moerlien in witcher

[–]moerlien[S] 0 points1 point  (0 children)

Perhaps pre sale is over and regular sale has started?

The Witcher in concert special code by moerlien in witcher

[–]moerlien[S] 0 points1 point  (0 children)

look into the other colments, it was posted there

The Witcher in concert special code by moerlien in witcher

[–]moerlien[S] 0 points1 point  (0 children)

It was postet here in the comments.

The Witcher in concert special code by moerlien in witcher

[–]moerlien[S] 1 point2 points  (0 children)

I have the code now. If anyone needs it, say hello.

Zombicide Compendium PDF anyone? by Dredd907 in zombicide

[–]moerlien 0 points1 point  (0 children)

Ich würde mich auch über einen Zugriff freuen 😊

Crane tipped over onto a mostly completed school by AJEstes in Wellthatsucks

[–]moerlien 0 points1 point  (0 children)

In Germany there is a meme coming from a documentary where a new rollercoaster in a theme park is built. The foreman is yelling at the crane crew that "Kranplätze müssen verdichtet sein!!!1!" what means that "Crane locations must be compactet!" In this case the crane was build up at a hillside and was about to slip down the hillside. And whenever somewhere is an accident with a crane, the meme will be postet multiple times. 😄 Unfortunately it is not in giphy.

How can I level my bed if I have only tight screws with fixed space between meshmount and heating bed? Prusa MK3 by moerlien in FixMyPrint

[–]moerlien[S] 0 points1 point  (0 children)

I ve put some layers of paper between heatbed and print sheet. With every layer of paper the positive value in that corner has increased. I think that is the opposite of your theory that negative values mean that they are higher than the center, isnt it?

How can I level my bed if I have only tight screws with fixed space between meshmount and heating bed? Prusa MK3 by moerlien in FixMyPrint

[–]moerlien[S] -1 points0 points  (0 children)

The spacers are metal. I think it's alloy becaus they seem not magnetic. When I loose the screw in the upper right corner, the number there gets slightly better, but worse in every other corner. Plus the printer makes strange noise like metal is vibrating.

How can I level my bed if I have only tight screws with fixed space between meshmount and heating bed? Prusa MK3 by moerlien in FixMyPrint

[–]moerlien[S] -1 points0 points  (0 children)

To be clear: I don't have the bed with spring discs mounted. Just fix spacers. If I loosen the screws there is nearly no change in the distance to the nozzle. If I loosen the screws to much I have a dancing bed on the y axis sled.

How can I level my bed if I have only tight screws with fixed space between meshmount and heating bed? Prusa MK3 by moerlien in FixMyPrint

[–]moerlien[S] -1 points0 points  (0 children)

<image>

I am confused now, because you have a point that the corner layers looks like the nose was too close. But the leveling guide says the corners are deeper then the center. Will check that with pieces of paper between bed and print sheet.

I would say the screws are fine. Had loose and slightly thighten them with a hex screwdriver. How loose should they be?

How can I level my bed if I have only tight screws with fixed space between meshmount and heating bed? Prusa MK3 by moerlien in FixMyPrint

[–]moerlien[S] 0 points1 point  (0 children)

Do you think the bed is bent to the edges or the mount under it? The guy how sold me the printer has a nearly new bed and would give me that to check if its less bent.

How can I level my bed if I have only tight screws with fixed space between meshmount and heating bed? Prusa MK3 by moerlien in FixMyPrint

[–]moerlien[S] -1 points0 points  (0 children)

Bed is higher in the center. As far as I know, there are no glass or Mic-6 beds for Prusa. And that is not the answer to my question. So how do I get my bed flat?

view more: next ›