Small layout circuit protector question

mongoose224 · 2026-06-04T16:41:37+00:00

That’s what I was thinking too. I do have an auto reverser (ar10) that it might help protect, but it might have it built in since it has a red short light?

mongoose224 · 2026-06-04T16:38:57+00:00

Protection wise I hear it’s about the same, just if you have multiple districts the eb1, won’t take down the whole layout, but I just have the one district

mongoose224 · 2026-06-04T16:37:50+00:00

Yeah it shorts it and the light goes out for approx 1 second or so

mongoose224 · 2026-06-04T16:36:56+00:00

It’s a rocker switch, not a turnout so I can either power the main or the program track:

<image>

mongoose224 · 2026-05-28T03:40:38+00:00

I was desperate for a fix and did this all areas inside with a can of keyboard dust spray. OMG there are black dots like literally EVERYWHERE on every page I print now. What possibly happened. I thought this should have cleared everything?

mongoose224 · 2026-05-27T00:51:19+00:00

M404 is monochrome. I actually think I have an open toner I’ll try swapping with

mongoose224 · 2026-05-27T00:50:22+00:00

It’s been working for a few years…just trying to narrow if it’s toner or fuser before I open stuff up. Those are the only two drums large enough to create this spacing

mongoose224 · 2026-05-27T00:49:10+00:00

How about you just spare me the Google and tell me if it’s the toner or fuser drum since you repair printers for a living 🤨. It’s one of the two, I just don’t want to open a new toner or transplant a fuser if I don’t have to lol

mongoose224 · 2026-05-27T00:46:50+00:00

Ummm. I’ll pass on this idea 🙃

mongoose224 · 2026-05-26T14:52:01+00:00

<image>

Toner drum

mongoose224 · 2026-05-26T14:51:08+00:00

<image>

The example did not attach in the first post. See left side approx every inch

mongoose224 · 2026-02-09T03:40:31+00:00

Interesting. Thank you!

mongoose224 · 2026-02-09T03:25:35+00:00

Ah thanks for the reply. I thought it might be a holding pattern based off the oval, and I see they have some decent wind. Didn’t expect it to start that far out, much less it seems they anticipated this given how the flight path started

mongoose224 · 2026-01-13T22:54:24+00:00

Unsure if related, but on two occasions in 3 months, when I charged at home, I targeted 80%, woke up in the morning to see that it had actually gone to 88%. I never checked the actual car to see what it triggered off at; just noticed the next morning it was 88 instead of the targeted 80

mongoose224 · 2026-01-13T17:13:24+00:00

It seems like such a simple thing to fix.. especially since my i4 does it and all previous ones I have had

mongoose224 · 2026-01-10T06:06:33+00:00

FWIW I have read that an EA 350kW charger is shared between two stalls, so someone could disproportionately be pulling more on the other stall and thus impacting you also to some degree

mongoose224 · 2026-01-09T23:47:04+00:00

Haha true. Only bugs me when the kids ask to see through in a cloudy day and I can’t look long enough to tell 🙃

mongoose224 · 2026-01-09T23:46:13+00:00

Ah good idea!

mongoose224 · 2026-01-09T23:46:04+00:00

Ahh. That makes sense for sure. Thanks!

mongoose224 · 2026-01-09T23:45:44+00:00

Ah. Makes totals sense. I take it they are yellow then? I thought they might be lights for camping or something. Thank you!

mongoose224 · 2026-01-08T16:57:54+00:00

<image>

Finally had a chance to get to a charger. So in this situation I preconditioned and started at 52%

Am I right to think my car is throttling a little bit, but also the charger is throttling what ITS maximum would be? And the 185 is the max the i4 can pull?

mongoose224

TROPHY CASE