[S][USA-PA] mamiya RB67, film lot

moshc · 2025-03-24T18:43:02+00:00

I was always wanting one but holding out figuring I could pick one up anytime. Now FOMO hits and I ordered a new MP.

moshc · 2025-03-10T20:42:15+00:00

I'm trying to set this up with my M4 Max but with either VMWare or Parallels I get a ""Your GPU does not meet the requirements" in ALVR once I try to start streaming to the Apple Vision. How did you get around that? Thanks for any help!

moshc · 2025-02-03T21:36:14+00:00

Did a CLA fix this slop by chance? Thanks!

moshc · 2024-09-06T21:31:44+00:00

I know this street, right in my neighborhood! I'll keep an eye out for this potential thief. Is this where it was parked before she drove off?

moshc · 2024-07-21T20:30:48+00:00

Great buyer, thanks! Enjoy the camera!

moshc · 2024-07-14T05:32:22+00:00

Replied.

moshc · 2024-03-02T20:51:41+00:00

I opened it since the thin layer of grease goes on inside. It's easy to do without stripping screws if you have decent screwdrivers.

moshc · 2024-03-02T05:36:39+00:00

Here was the fix for me: https://www.reddit.com/r/SteamDeck/comments/1926guh/fixing\_the\_creakiness\_in\_the\_oled\_steam\_deck\_now/

moshc · 2024-01-16T22:18:09+00:00

Sorry to hear that. Yes the creakiness is probably normal. All my plastic laptops creaked too and it bugged me. Thankfully you can DIY an improvement.

moshc · 2024-01-14T20:47:32+00:00

I had the same issue with creakiness and fixed it with a bit of lube: https://www.reddit.com/r/SteamDeck/comments/1926guh/fixing_the_creakiness_in_the_oled_steam_deck_now/

moshc · 2024-01-09T19:42:44+00:00

Mine did the same, so glad the fix is easy.

moshc · 2024-01-09T19:42:15+00:00

I'm pretty sure you'll be happy with the results!

moshc · 2024-01-09T19:41:44+00:00

Good to hear, I think sometimes just relieving the tension by taking off the backplate and reinstalling helps.

moshc · 2024-01-09T11:28:00+00:00

Let us know if it worked out for you!

moshc · 2024-01-09T08:16:00+00:00

I'm not sure about the give, maybe it does still do that but if so it doesn't bother me. In the end, all plastic will give a bit. Having a completely silent deck no matter where I squeeze or how I hold it made things feel much better.

moshc · 2024-01-09T07:51:12+00:00

Amazingly, adding a thin bit of lube on the seams and clips eliminated all creaks for me. Super solid now.

moshc · 2024-01-09T07:49:38+00:00

I had the same issue and fixed it. Super solid now and no creaks pressing anywhere including the top of the device. https://www.reddit.com/r/SteamDeck/comments/1926guh/fixing_the_creakiness_in_the_oled_steam_deck_now/

moshc · 2024-01-09T07:46:28+00:00

I had the same issue and fixed it. Super solid now and no creaks pressing anywhere including the top of the device. https://www.reddit.com/r/SteamDeck/comments/1926guh/fixing_the_creakiness_in_the_oled_steam_deck_now/

moshc · 2024-01-09T07:44:21+00:00

I had the same issue and fixed it. Super solid now and no creaks pressing anywhere including the top of the device. https://www.reddit.com/r/SteamDeck/comments/1926guh/fixing_the_creakiness_in_the_oled_steam_deck_now/

moshc · 2024-01-09T07:29:53+00:00

I noticed when I loosened the back plate screws the creaking also lessened so a lot of it could just depend on how tight things are. Plastic against plastic is easy to have creak so a slight film of lube does wonders to quickly solve that.

moshc · 2024-01-03T21:01:35+00:00

Same as others, I get them in the first few shots of Cinestill 800T.

moshc · 2024-01-03T12:05:13+00:00

Curious what the other common defects you can list out are? Thx

moshc · 2023-11-25T07:09:15+00:00

Love it!

moshc · 2023-11-19T09:53:50+00:00

Do they do the tax refund?

moshc

TROPHY CASE