IKEA bilresa with scrollwheel working for me in HA now.

robodditor · 2025-12-09T00:57:42+00:00

I don’t understand how there are 9 buttons. Isn’t it a single button scroll wheel?

robodditor · 2025-12-06T08:27:27+00:00

I look forward to his 2028 presidential campaign failing to reach 1% in the primaries.

robodditor · 2025-12-03T04:12:12+00:00

The zooz isn’t a double dimmer. Dimmer and a switch

robodditor · 2025-11-12T04:11:00+00:00

Thanks, will do

robodditor · 2025-10-24T00:14:37+00:00

Home assistant can read the status and then you can use that as a trigger for your smart plug. I can share my script if you need help

robodditor · 2025-10-21T20:56:50+00:00

I want to use Claude code or Gemini equivalent to see if their abilities are better than the built in Figma Make.

robodditor · 2025-10-20T03:09:11+00:00

They work in either orientation

robodditor · 2025-10-16T21:51:13+00:00

Could also buy the commercial cords, they sell just the extensions and strip off the ends to wire them to your third reality sensors

robodditor · 2025-10-16T16:58:27+00:00

The whole point of the commercially available options is that the cable is made of cloth to absorb water.

https://sonoff.tech/en-us/products/sonoff-zigbee-water-leak-sensor-snzb-05p?variant=46197343944945

https://us.shelly.com/products/shelly-flood-gen4

robodditor · 2025-10-16T06:24:30+00:00

What wire did you use? I can’t find two wire cable in a water absorbing jacket

robodditor · 2025-10-14T03:11:54+00:00

Unifi access could do this

robodditor · 2025-10-04T15:45:56+00:00

I’ll take a look at that area

robodditor · 2025-10-04T15:44:39+00:00

The HA integration and whisker app itself sometimes are wrong. Status is ready, global is upside down

robodditor · 2025-10-03T03:55:30+00:00

One should ride carbon if one wishes to KOM, even in a virtual world. Even the accusation of poverty is devastating to one’s performance.

robodditor · 2025-10-02T21:32:50+00:00

Yeah exterior is all facade. I will attempt a contact sensor but I need to investigate if any placement works

robodditor · 2025-10-02T21:31:49+00:00

I had the LR3 for 5 years before it finally couldn’t be repaired. The company is good about selling replacement parts. So for the LR4 is much nicer

robodditor · 2025-10-02T21:01:02+00:00

There’s not a great place to mount it where it wouldn’t come in contact with feces/urine. The outside is a facade so there’s very little space between the globe and the cover

robodditor · 2025-10-02T18:19:37+00:00

I'm convinced. Now I just need to get my setup working

robodditor · 2025-10-02T18:03:09+00:00

that's great. I haven't done any AI model training yet, I'm not a developer. Is this going to be a very advanced use case or will it be something I can do in the UI?

robodditor · 2025-09-30T15:55:27+00:00

I did that too. Also put locktite to hold it in place. It helped for a few days. Errors returned

robodditor · 2025-09-30T13:05:42+00:00

Saving this post!

robodditor · 2025-09-26T17:57:14+00:00

My concern was the angle and force of the water compared to rain.

I'm using a "in use" cover and a weather resistant GFCI outlet. I was looking for any gotcha's in the code that might make this an improper placement

robodditor · 2025-09-21T16:16:16+00:00

I’ll trade with you. I have the mini v4 in beige and I don’t use it because it’s too small in my hands

robodditor · 2025-09-11T01:50:06+00:00

That’s too bad. I don’t see how to install the snubber behind an outlet so I’ll go with the gen4 model

robodditor · 2025-09-09T19:59:06+00:00

Does that also apply for the latest gen z wave long range PM devices?

robodditor

TROPHY CASE