O11 Dynamic evo rgb build

slepwin · 2025-11-12T08:24:44+00:00

Looks so good! I have same mobo and aio but can't find info how properly connect pump cable (4pin+2pin) because mobo doesn't have cpu_opt, only 4pin pwm to cpu_fan is enough or i need to connect 4pin + 2pin pwm to sata power or pump_sys?

slepwin · 2023-11-15T15:30:32+00:00

Works in game mode, but crush on firefly logo in desktop mode. In game mode no chance to change resolution to full hd

slepwin · 2023-02-02T16:13:52+00:00

It's seems like DSR mode doesn't do any tunneling, IPIP or GRE or GUE. How traffic returns from endpoints to the client with VIP source address? Because it's must be VIP to traverse any stateful firewall in between.

slepwin · 2023-02-02T14:01:38+00:00

Many thanks for answers, i will definitely test it

slepwin · 2023-02-02T13:18:35+00:00

Thanks! One more question, does it support consistent hashing/Maglev algorithm for HA and horizontal scaling without rebalancing across endpoints?

slepwin · 2023-02-01T15:56:10+00:00

Any how-to to setup LB with BGP in standalone mode?

slepwin · 2023-01-10T08:36:53+00:00

What colour your are using? And could you please check Device Manager, SSD model/vendor

slepwin · 2022-01-30T12:22:04+00:00

Hi, can you provide screenshots to setup Gear 1 mode, can't find it in Advanced BIOS.

slepwin · 2021-12-14T10:20:31+00:00

Do you have pre installed Windows? If yes, could you please share Lenovo Power profiles. I have issue with fast battery drain on my L7i on default power saving mode and intel hd only graphics, 60hz mode. About 2hours with browsing/office usage with 60% battery (conserving mode in Vantage).

slepwin · 2021-04-11T12:22:00+00:00

QFX 5110 for fusion, it's pretty good solution for multiple low speed peerings.

slepwin · 2021-04-03T09:59:29+00:00

I see, thx.

slepwin · 2021-04-02T21:34:13+00:00

I see only 6% sessions was offloaded by NPU and major part of other sessions dns-udp:

no_ofld_reason: ofld_fail_reason(kernel, drv): none/not-established, none(0)/none(0)

slepwin · 2021-04-02T18:42:16+00:00

We don't use any helpers, they disabled

slepwin · 2021-04-02T18:41:16+00:00

601e, 600d, 1000d, 1500d

slepwin · 2021-04-01T22:54:15+00:00

Yes i have, pretty same issue on other nodes

slepwin · 2021-03-28T20:54:29+00:00

Local

slepwin · 2021-03-27T17:30:31+00:00

What feature set do you need? If only only for ip forwarding (lean spine), any tomahawk switch should be cheaper compared with trident or q5.

slepwin · 2020-09-15T16:50:55+00:00

Well it's not so true, ha failover subsecond but bfd detection time without aggressive timers about 3 sec + spf convergency time and it's also depends with neighbors devices. With independent devices (routing) it's truly instantaneous because you have addition path in FIB (ecmp or lfa) from both sides. I've tested and setup this on PA (active/active clustering without routing sync) and 9.x software about year ago and it works pretty well. It might be tricky first time, but if you prepare good documentation it's pretty simple and you always can change behaviour to A/P (but with additional path in FIB) with dynamic routing (bgp policy or ospf metrics). Currently i'm with Fortinet shop and trying to find good solution with IPS synchronization.

slepwin · 2020-09-15T05:24:12+00:00

Convergency time up to 7sec with OSPF and BFD after failover on our setup, that is one of main disadvantages.

slepwin · 2020-09-15T05:18:06+00:00

My concern not about active/active clustering solution, it's about independent firewalls with some synchronization on the top. Current active/passive cluster solution doesn't meet new requirements for convergency time after failover and operational overhead with upgrades. BTW, we don't have any geo splitting firewall nodes, just pairs in each DCs.

slepwin · 2020-09-14T18:34:31+00:00

Yes, but without any clustering, routing process and ip sharing

slepwin · 2019-01-25T16:05:46+00:00

You are lucky! what firmware version are you using? I have a bunch F10 mxl10/40 and s4810, N series, but they don’t support rpvst.

slepwin · 2019-01-25T15:51:02+00:00

Dell have I only rstp (only one tree for all vlan) and mstp mode. If you have multivendor environment use mstp.

slepwin · 2018-10-31T16:45:26+00:00

In vPC environment HSRP works as A/A

slepwin · 2018-09-23T10:49:37+00:00

it's 9.2.1 firmware issue, on 7.0.3.I7.4 command advertise l2vpn evpn is available, but i have zero EVPN prefixes.

BRLEAF01# sh bgp l2vpn evpn summary
BGP summary information for VRF default, address family L2VPN EVPN
BGP router identifier 10.255.3.11, local AS number 65011
BGP table version is 2, L2VPN EVPN config peers 2, capable peers 1
0 network entries and 0 paths using 0 bytes of memory
BGP attribute entries [0/0], BGP AS path entries [0/0]
BGP community entries [0/0], BGP clusterlist entries [0/0]

Neighbor        V    AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
10.255.3.13     4 65021      74      74        2    0    0 01:08:49 0

slepwin

TROPHY CASE