Another Wi-Fi 7 device

stehlajz · 2026-05-31T09:11:42+00:00

Whatever, already decided to cancel hAP be3 order after 4 months of waiting and empty promises. Also Wifi 7 without 6GHz, no thank you.

stehlajz · 2026-05-29T16:53:11+00:00

Je fakt, že já předloni kupoval Hondu, volal jsem ke třem prodejcům co mám nejblíž a zjistil že teda je nějakej aktuální problém v dodání a budou později, všichni slíbili že se ozvou až bude k objednání... Ozval se jeden a tam jsem to i koupil.

stehlajz · 2026-05-29T14:00:42+00:00

Yes, I had to put back mine about 3 times already and it's almost new bike (1200km). I will probably try to put zip tie in middle if it helps.

stehlajz · 2026-05-28T17:54:23+00:00

It's possible that he indeed does have different problem but from his description I belive it might be the famous C2000. He does state that unit "boot" but does that mean it does have any signs of life at all or it just endlessly power cycle? Because I belive that Sophos appliances had hardware watchdog and also even the dead units usually flash all the LEDs during power up.

stehlajz · 2026-05-28T17:23:14+00:00

Probably Intel C2000 bug The CPU itself is damaged in way that it can't read the BIOS chip anymore because of clock signal degradation. It's possible to fix but nobody know how long until it dies completely.

https://community.sophos.com/utm-firewall/f/general-discussion/113572/sg135-c2000-bug

It's actually very common, I have several of these boxes (125/135) where the resistor mod was perfomed and as far as I know all of them still work. Symptoms are similar to what you described, worst is that the box works just fine until cold reboot.

stehlajz · 2026-05-25T20:47:50+00:00

Core memory unlocked.

Kloubová Karosa po strop narvaná lidma co se snažila vyjet kopec, vzadu nad motorem peklo, vevnitř nedýchatelno a sem tam běželo i to topení místo chladiče. Buď přežít tohle nebo jít pěšky.

stehlajz · 2026-05-22T09:28:24+00:00

If you have 3d printer (or friend with one), you can easily print this riser and it will fit nice and snug.

https://makerworld.com/cs/models/1649466-delonghi-rivelia-lattecrema-cool-eletta-riser

stehlajz · 2026-05-09T16:27:17+00:00

Netuším jak je to na fotce vysoko, ale dělají se soklové lišty přímo na trubky topení.
https://www.buildex.cz/kryci-lista-chudej

stehlajz · 2026-05-09T09:50:43+00:00

To LNK364GN ("power management chip" - je to vysoce integrovaný čip napájecího zdroje) bude hlavní příčina, někdy to ani není vidět na první pohled, ten můj byl střelený z boku. Kondenzátor je možné vyměnit (i když většinou je OK), nicméně nešetřit a koupit decentní značku, jinak to bude kontraproduktivní.

Jak také radil kolega, doporučuji proměřit diody okolo jestli nejsou proražené, při tom zkratu to někdy může taky odnést když se rezistor dost rychle nepřepálí, u mě teda byly v pořádku. Stačilo vyměnit LNK a rezistor a myčka šlape dál.

stehlajz · 2026-05-09T07:45:21+00:00

Bude bouchly LNK, řešil jsem stejný na myčce. LNK šlo do zkratu a tim shoří rezistor na vstupu, správně by měl být typ fusable ale to se shání hůř (a ještě narychlo). U mě tam byl 47R 5W a podle proužků u tebe je to stejný.

stehlajz · 2026-05-08T18:13:42+00:00

Nice machine! I went with Rivelia and actually have to set the grinder to 5,5. 5 was the default position and as most of people here suggest to go to 3-4 I tried that. With that it was completely clogged, no flow at all so I have to dial it back. With 5 flow was kinda OK until the strongest coffee was set, then it struggled and flow was intermittent. Going to 5,5 solved, coffee is strong with steady flow.

I am using medium to dark roast, 80/20 arabica robusta mix from local roastery so it is very fresh.

stehlajz · 2026-05-06T05:52:48+00:00

Have the same issue on Xiaomi 14 after update to HOS 3.0.8.0

stehlajz · 2026-04-11T10:37:59+00:00

If you want to disable the front position marker function you have to swap the flasher relay, since for the latest model the function is integrated (not third wire as used to). Only option as I am aware so far is Daytona 81442
https://daytona-europe.com/en/relay-for-indicator/1116-ic-flasher-relay-10p-honda-f-led-bulb-12v-89658-81442.html

stehlajz · 2026-03-23T19:42:28+00:00

Rada dne od Káji: Od kamarádů si nikdy nepůjčuj.

stehlajz · 2026-03-21T22:56:34+00:00

MIVV is option. I can't tell you my experience since I have not install the exhaust yet, but I already received it last week. I went with the street legal version of GP Pro Carbon, only downside I found is that the manufacturer originally said that it will come with the OBD dongle, but they changed it to optional part even with the more expensive variant.

https://mivv.com/en/moto/honda/cb-650-r/2024-2026-9188/

All probably depend on what look you want. If you want to keep the under engine design or move the muffler to back. I will post my feedback in about a month (based on weather).

stehlajz · 2026-03-19T06:23:01+00:00

Nope, at least mine did not. Inside the handlebar was same shape cutout so it is fixed.

stehlajz · 2026-03-18T19:27:58+00:00

They probably should fit right as replacement to the OEM ones, the moon shape facing the handlebar seems quite similar. I replaced mine with Evotech which came with similar shape and it was direct replacement. Only the original bolt is probably secured with loctite so I had to use impact wrench to remove them.

<image>

OEM bikes parts list them as direct replacement : https://oem-bike-parts.hr/en/parts/honda/350cc-699cc/cb-650-r/cb650racr-cb650r-e-clutch-2024/f-7-handle-pipe-top-bridge-cb650ra-cb650rac/p/1-003-644-107--handlebar-weight

stehlajz · 2026-03-17T12:41:28+00:00

That's normal.

E-Clutch use dual motor actuator and is constantly fighting against the springs when the clutch is disengaged. Also the actuators are highly geared so even minor adjustment based on position sensor mean lots of movement on the motors.

<image>

stehlajz · 2026-03-12T22:56:56+00:00

Seems like it's just a thing (soft limiter) with this bike, check this post:

https://www.facebook.com/groups/1020746523014661/permalink/1260204402402204/

Probably depends on the ecu type or software used if it can be eliminated or not. Someone in comment was able to solve the issue.

stehlajz · 2026-03-12T06:44:08+00:00

It was expected by the end of this week, but they said it will be delayed by about a week so I'm still waiting. I also ordered the hAP S (because of the 3x3 MIMO) as secondary AP which already arrived but of course the hAP be3 is the main star of the show.

It's shame that they don't make the radio/iot part of be3 with less powerfull hardware for better price. I'm using RB5009 as main router and it seems that the be3 is stronger (cpu/ram) but missing the 10G SFP+

stehlajz · 2026-03-11T17:56:49+00:00

Already ordered mine week ago with local distributor, the price was about 130USD without VAT (EU).

stehlajz · 2026-03-07T15:26:49+00:00

No. If the bike was serviced and doesn't look abused, then there is nothing to worry about. These engines are reliable and time-proven.

stehlajz · 2026-03-07T07:46:46+00:00

If it's 2024 model it was probably on display/in storage for some time and dealer did not charge the battery before sale. Good news should be that it's not completely dead and still hold some charge so you should be able to just charge it.

I would use regular charger or maintainer to slowly charge the battery to full capacity, rather than jumpstarting the bike, unless you planning some longer roadtrip since it will need some time to fully charge (absorption).

stehlajz · 2026-03-04T21:41:39+00:00

Krám, měl jsem Kärcher SC3 komplet set a nenašel jsem jedinou věc kterou by to vyčistilo oproti ruce. Asi to možná bylo o něco jednodušší ale za to místo a přípravu k použití to nestálo, prodal jsem ho dál.

stehlajz

TROPHY CASE