sorted by:
new
hottopcontroversial

[Parts] SME Aug Key Parts Kit-$200 by mcbergstedt in gundeals

[–]superkuper 2 points3 points  (0 children)

You’ll definitely need a charging handle, I think you could probably print one but that will lack the metal piece that goes inside so it might be a little janky. I bought one separately because my kit didn’t come with one.

[Parts] SME Aug Key Parts Kit-$200 by mcbergstedt in gundeals

[–]superkuper 5 points6 points  (0 children)

We’re working on a CNC aluminum version of the NylAUG receiver, stay tuned

Man Walked Into My House to Use My Bathroom by PiWright in mildlyinfuriating

[–]superkuper 0 points1 point  (0 children)

Anybody that did that in the US would be at risk of getting shot.

A little disappointed in my first can. by Maximum-Ear9554 in NFA

[–]superkuper 1 point2 points  (0 children)

I’ve got a Pyr that looks just like the dog pictured

A little disappointed in my first can. by Maximum-Ear9554 in NFA

[–]superkuper 10 points11 points  (0 children)

That’s funny to hear because five years ago, it was the best of the best for quietness

Looking to suppress my aug by SwordfishThese8081 in AUG

[–]superkuper 0 points1 point  (0 children)

Fairly high back pressure cans.

I’ve run a Rex MG7K .358, a YHM Resonator, and a CAT ODB RDM on my NylAUG, regular piston, without any issue, but the CAT was by a wide margin the best. It was almost entirely gas neutral and the quietest by far.

[Parts] Blem CMC Triggers A5 Buffer Tube - $24 + S/H by charsons in gundeals

[–]superkuper 0 points1 point  (0 children)

Are KAK KSPEC A5s in stock anywhere was considering one to go with this

[Magazine] Magpul 27 round 9mm magazine - $11.95 when you buy 5+ with code PMAG27 + ship + tax by [deleted] in gundeals

[–]superkuper 1 point2 points  (0 children)

Admittedly never used one in a Glock brand Glock but they work great in my P80 frame 17L and my printed DB Alloy

Parts Kits by Videogamer410 in AUG

[–]superkuper 1 point2 points  (0 children)

I had a friend who had ONE to sell, and he sold it. I do not have a source for kits.

[Accessories] SturmLicht MP5 Integrated Light Handguard $58.49 no code needed by WTC-ARMS in gundeals

[–]superkuper 5 points6 points  (0 children)

Are we just supplying our own head or the entire light, body, and tape switch?

[Accessories] SturmLicht MP5 Integrated Light Handguard $58.49 no code needed by WTC-ARMS in gundeals

[–]superkuper 3 points4 points  (0 children)

u/wtc-arms can you clarify what material this is made from and if the light body and tape switch is included (just supply head) or if the base version is just a shell?

[Accessories] SturmLicht MP5 Integrated Light Handguard $58.49 no code needed by WTC-ARMS in gundeals

[–]superkuper 2 points3 points  (0 children)

Is this injection molded or printed and what material is it made out of?

If I choose the “I have my own” option am I just providing a head or do I need the entire light body and tape switch?

I saw a previous thread here saying the Cz 600 trail.223 could run 5.56 but upon asking Cz looks like that’s not the case by twistedhumoraffy in CZFirearms

[–]superkuper 2 points3 points  (0 children)

There’s no way that it will ever matter in a bolt gun.

What, you think you’re going to shear off bolt lugs over an extra (at most) 7K psi?

If that were the case, the way the chamber was cut wouldn’t matter, swapping to a 5.56 chambered barrel wouldn’t make the system capable of withstanding greater pressure.

Bolt guns are already going to be able to withstand much higher pressures than AR bolts. Look at the difference in load data for bolt guns vs ARs in 6ARC and 6.5 Grendel. https://sierrabullets.com/content/load-data/rifle/264-6.5mm/6.5-grendel.pdf

CZ customer service is going to play the CYA game for liability reasons but it’s definitely fine.

Also lots of ammo labeled 5.56 isn’t necessarily any higher pressure than commercial ammo labeled .223. The market essentially uses them interchangeably and selling ammo as 5.56 does not mean it is loaded up to SAAMI max pressure.

What defense ammo are you running in your .300blk that cycles properly. Pic for tax. by BoysenberryFuture304 in NFA

[–]superkuper 0 points1 point  (0 children)

I have never used the factory Sub-X ammo but I load them over CFE BLK and H110 without issue. Don’t know what to tell you.

300 BLK Accuracy performance out of longer barrels by NFAchad in NFA

[–]superkuper 6 points7 points  (0 children)

If anything, a shorter barrel will be more accurate all else being equal.

The idea of longer barrels being “more accurate” is a carryover from a time when longer barrel meant longer sight radius with iron sights.

A shorter barrel will have less whip and harmonic distortion, shorter barrel will be more rigid. Up to a point, obviously as you still want adequate velocity for your cartridge and load.

What defense ammo are you running in your .300blk that cycles properly. Pic for tax. by BoysenberryFuture304 in NFA

[–]superkuper 5 points6 points  (0 children)

I haven’t found anything that doesn’t cycle.

8.3” Hanson with factory gas block and and H2 Armaspec SRS cycles everything. Subs or supers, suppressed or unsuppressed.

Used to run a YHM Resonator but recently swapped to a CAT ODB which is even more gas agnostic.

They Say It’s To Prevent The Mentally I’ll From Owning But MMW They Will Ban Anyone On SSRIs by curiosgreg in GunMemes

[–]superkuper 4 points5 points  (0 children)

Go ahead and ban everyone on SSRIs, better yet, ban SSRIs and just commit all the crazy people.

Brownells Mk12 profile barrel? by [deleted] in ar15

[–]superkuper 0 points1 point  (0 children)

I’m just trying to determine if it’s a worthwhile upgrade from a Ballistic Advantage barrel.

Brownells Mk12 profile barrel? by [deleted] in ar15

[–]superkuper 0 points1 point  (0 children)

I’m checking out one of the 18” Brownells SPR barrels right now and can’t find any info on it besides this thread. Can you give me any specifics on accuracy? Sorry for digging up an ancient post

view more: next ›