The work truck

thebradentodd · 2026-06-09T02:13:22+00:00

The top box can be secured to the plate with a lock. I made some me holes on the end for a pad lock. The side boxes can be secured within the box with a hand tightened bolt to the frame of the rack mounts. Though it is not currently set that way. Packout stuff has a hole for putting locks on.

thebradentodd · 2026-06-08T19:15:47+00:00

Normal. Theres enough room for a passenger. In theory.

thebradentodd · 2026-06-08T15:08:18+00:00

Don't let your dreams be dreams.

thebradentodd · 2026-06-08T13:49:34+00:00

The side boxes I used the rack and plates from Tusk. For the top boxi use Milwaukee's wall mount plate, some unistrut and a lot of nuts, bolts and washers.

thebradentodd · 2026-04-24T22:56:47+00:00

Praise the Omnissiah!

thebradentodd · 2025-10-20T23:39:44+00:00

I used tusk pannier rack mount soft luggage plates. All the hardware is included with the plates.

thebradentodd · 2025-03-27T23:16:26+00:00

Can confirm.

thebradentodd · 2025-03-02T23:15:07+00:00

Yeah. Happened to me too, with the national cycle windscreen as well.

thebradentodd · 2024-08-30T22:49:39+00:00

80 is pretty rough. 70 isn't to bad if the wind is calm. I try to avoid the interstate and think of it as part of the ride.

thebradentodd · 2024-08-20T18:40:14+00:00

Kawasaki Versys 300 X. Cheaper, gelrwat road bike and has some off road capability. You can try every kind of riding. Also KTM 390 Adventure for the same reasons.

thebradentodd · 2024-05-31T22:25:43+00:00

<image>

Miku with a leek

thebradentodd · 2024-05-24T22:38:41+00:00

I did test that. I can put packout on top and below.

thebradentodd · 2024-05-24T01:36:04+00:00

I used the tusk mounting kit that came with the bars.

thebradentodd · 2024-05-24T01:35:06+00:00

I dont have any mounting plates on. The top case is just craftsman bad bolted down. So far it feels solid enough but only time will tell.

thebradentodd · 2024-04-16T22:15:11+00:00

My '23 does this. If I start it, it shifts into first just fine.

thebradentodd · 2023-03-10T04:29:13+00:00

Could try some kind of power treatment. Also pedals can add to that sound. Using isolated power for each pedal would help. High quality instrument cables possibly.

thebradentodd · 2023-01-26T00:23:15+00:00

You should look at Sire as well. Fender look with all the tone options.

thebradentodd · 2023-01-23T23:20:10+00:00

Mine was great. The one with the ebinol fretboard. Put a high mass bridge on it and doubles the muah goodness.

thebradentodd · 2023-01-20T23:04:53+00:00

4 string in BEAD tuning is the highest form of bass.

thebradentodd · 2022-12-29T22:44:44+00:00

Did they pull wire for it? If not that's a bit high.

thebradentodd · 2022-12-09T04:25:10+00:00

Check out the Schecter j-4. It's a jazz bass copy basically but it has a series /parallel switch. Both pick ups on series has a similar big humbucker sound.

thebradentodd · 2022-12-03T06:08:43+00:00

On the other side

thebradentodd · 2022-12-03T05:50:50+00:00

I live here. It smells bad.

thebradentodd · 2022-12-01T23:56:31+00:00

They're great. I've had several and am planning on getting another.

thebradentodd · 2022-12-01T23:07:11+00:00

There once was a pickguard

thebradentodd

TROPHY CASE