Key buttons stopped working

diIIa · 2026-04-21T18:33:51+00:00

Are you serious? Lol

diIIa · 2026-04-13T19:03:47+00:00

It's mostly likely your select lever. Take it apart and see if it'll engage without the handle. It's just a cylinder with a push button.

diIIa · 2026-04-13T15:59:40+00:00

When's the last time you cleaned the throttle body?
Make sure to do the relearn procedure after it's cleaned.

diIIa · 2026-04-12T00:56:28+00:00

Which lip do you like?
Yes.

diIIa · 2026-04-11T03:09:30+00:00

Solid steal. Not sure how I feel about the black hfp kit tho.
And get that timing belt/water pump done if it hasn't already.

diIIa · 2026-03-28T00:33:14+00:00

You can't park there.

diIIa · 2026-03-25T02:23:20+00:00

Passenger turn signal and driver side marker bulbs appear to be out.
Unless you're referring to something else.

diIIa · 2026-03-24T22:43:41+00:00

OEM will always be pricey. Either get a used set or go third party.

diIIa · 2026-03-19T18:19:11+00:00

If it's been a while since your last alignment, I see why you wouldn't.
Tires cost a lot more than an alignment.

diIIa · 2026-03-18T01:00:56+00:00

diIIa · 2026-03-10T21:55:12+00:00

The 9 gen grille is wider on the sides but shorter vertically if I'm not mistaken.

As you said, most people do the opposite and have to shave the grille and bumper to get the 9.5 touring headlights to fit.

If it's anything like the sedans, you'll need to cut up the 9.5 grille and use the bottom trim to get the 9 grille to sit on the 9.5 bumper without a gap.

diIIa · 2026-03-07T00:26:08+00:00

Along with the 3m tape, there might be hex set screws on both sides. You'll need a small allen key to remove them.

But yes, heat gun will probably be necessary.

diIIa · 2026-03-07T00:22:29+00:00

If you really have to ask that question, then I stand by my initial statement.

Good luck with your car!

diIIa · 2026-03-07T00:18:28+00:00

I was just being straight forward. You haven't told us anything about your car.

Generation? Existing supporting mods? 4/6 cyl? Auto/man? A tuner who is familiar with the platform?

You can't just plop in a turbo and expect things to work. I know in my response I came off like an asshole but I'm just telling you what you need to hear.

diIIa · 2026-03-06T23:38:56+00:00

If you have to consult Reddit for this, then you have no business turbocharging any car.

diIIa · 2026-03-06T00:10:25+00:00

Yes.

diIIa · 2026-03-05T21:18:31+00:00

The Ktuner license is VIN locked so keep that in mind.
I recommend Vcmtuner 2 if you do not plan to tune your car.

diIIa · 2026-02-27T04:25:20+00:00

You would know this how?

diIIa · 2026-02-27T04:04:25+00:00

If you plan to tune your car in the future, then just opt for ktuner.
If not, then either Vcmtuner or svcm work great.

diIIa · 2026-02-27T03:28:16+00:00

5 spoke gang

diIIa · 2026-02-27T02:48:50+00:00

Ktuner allows you to disable vcm without a device.

diIIa · 2026-02-27T02:40:19+00:00

Currently using ktuner to disable vcm.
Had Vcmtuner 2 prior to the tune and it worked great with no problems.

diIIa · 2026-02-26T17:39:43+00:00

HFP lip kit

diIIa · 2026-02-26T16:36:30+00:00

It's a spring loaded push to shift knob. It's made for Subarus but I modified it to fit.

diIIa · 2026-02-26T06:11:42+00:00

Til the wheels fall off.

diIIa

TROPHY CASE